Coaxial speaker Beyma 15CXA400Fe, 8+16 ohm, 15 inch
|
Beyma |
15CXA400Fe |
15CXA400FE-8+16 |
115CXA4FE8 |
Coaxial driver with two entries |
|
|
Brand Beyma |
Model 15CXA400Fe |
TLHP code 15CXA400FE-8+16 |
Manufacturer code 115CXA4FE8 |
|
|
Product type Coaxial driver with two entries |
|
|||
-
15 inch coaxial speaker with 8 ohm impedance on LF section and 16 ohm impedance on HF section, can be filtered with the crossover FD2XA from Beyma.
15" coaxial with 4" voice coil woofer and 2,85" voice coil compression driver
Program power: 800 / 160 WAES (LF / HF)
Sensitivity: 98 dB LF and 105 dB HF
Common ferrite magnet system design
Demodulating rings in both LF and HF units
Composite titanium / mylar diaphragm
Waterproof LF cone
60º coverage horn for HF dispersion control
Beyma introduces the 12CXA400Fe and 15CXA400Fe, with common ferrite magnet design the new models are designed for top performance in the whole audible range. The typical application of these models are the stage monitors, but thanks to the outstanding response from the bottom to the top of the spectrum, more possibilities of application emerge (the neodymium versions are already installed in some reference broadcasting and recoding studios around the world).
General |
|
| Product type | Coaxial driver with two entries |
| Brand | Beyma |
| Reference | 15CXA400Fe |
| Product code | 115CXA4FE8 |
Informations |
|
| Nominal impedance | 8+16 ohm |
| Dimensional category | 15.5 inch |
| Manufacturer sensitivity | 98 dB |
| Calculated sensitivity | 96.38 dB |
| Nominal power handling | 400 | 80 W |
| Bandwidth | 35÷20000 Hz |
Fundamental parameters |
|
| Mms | 90 gr |
| Le | 0.95 mH |
| Re | 6.3 ohm |
Small signal parameters |
|
| Fs | 40 Hz |
| Qes | 0.43 |
| Qms | 16.4 |
| Qts | 0.42 |
| Vas | 191 L |
Datas |
|
| Xmax | ±6 mm |
| EBP | 93 Hz |
| Fs / Qts | 95 Hz |
| Vas * Qts² | 33.7 L |
| Efficiency | 2.75 % |
| Calculated efficiency | 2.73 % |
| Dispersion | 60° x 60° |
Dimensions |
|
| Voice coil diameter | 4 | 2.8 inch |
| Outside diameter | 388 mm |
| Baffle cutout diameter | 349.5 mm |
| Front thickness | 18 mm |
| Depth after front | 173.5 mm |
Shape & Materials |
|
| Front chape | Cylindrical |
| Magnet type | Ferrite |
Question about Beyma 15CXA400FE-8+16
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Repair Beyma 15CXA400FE-8+16
With Beyma 15CXA400FE-8+16, customers has also bought
Informations Beyma 15CXA400FE-8+16
15" coaxial with 4" voice coil woofer and 2,85" voice coil compression driver
Program power: 800 / 160 WAES (LF / HF)
Sensitivity: 98 dB LF and 105 dB HF
Common ferrite magnet system design
Demodulating rings in both LF and HF units
Composite titanium / mylar diaphragm
Waterproof LF cone
60º coverage horn for HF dispersion control
Beyma introduces the 12CXA400Fe and 15CXA400Fe, with common ferrite magnet design the new models are designed for top performance in the whole audible range. The typical application of these models are the stage monitors, but thanks to the outstanding response from the bottom to the top of the spectrum, more possibilities of application emerge (the neodymium versions are already installed in some reference broadcasting and recoding studios around the world).
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes Beyma 15CXA400FE-8+16
SPL vs Distorsion measure *
* On axis frequency response measured with loudspeaker standing on infinite baffle in anechoic chamber
SPL vs Distorsion measure *
* On axis frequency response measured with loudspeaker standing on infinite baffle in anechoic chamber
SPL vs Distorsion measure *
* Filtered frequency response measured with loudspeaker standing on infinite baffle in anechoic chamber
Impedance measure
Polar directivity
Dimensions
