La-Planche-de-Bois.fr |
SCOOP-18 |
EB-SCOOP-18 |
Cabinet kit |
Sold by kit |
|
Brand La-Planche-de-Bois.fr |
Model SCOOP-18 |
TLHP code EB-SCOOP-18 |
||
Product type Cabinet kit |
Sales packaging Sold by Kit |
|
Content of the kit EB-SCOOP-18 |
|||
Quantity | Item | ||
1x | Set of 95 wood panels for SCOOP-18 | ||
1x | Terminal TLHP CU-137 (piece) |
||
2x | Speakon socket Neutrik NL4MPXX (piece) |
||
1x | Rivet Bralo RIV-3.2X10-CAN (piece) |
||
1x | Screw TLHP VI-35X16-BCC-X24 (set) |
||
1x | Cabinet feet TLHP PC-3810 (set) |
||
4x | |||
4x | Screw TLHP VI-M6X40-FHC-X8 (set) |
||
4x | Teenut TLHP EP-M6-X8 (set) |
||
2x | Swivel Guitel RL80-FIX-BLEU (piece) |
||
1x | Teenut TLHP EP-M6-X8 (set) |
||
1x | Screw TLHP VI-M6X30-BHC-X8 (set) |
||
8x | |||
2m | Cable for speaker Sommercable MERI240-1GF |
||
1x | Gasket TLHP ME220-10 (piece) |
||
1x | Damping wool Visaton DAMPING M (set) |
||
1x | Set of two Visaton synthetic damping material Visaton, 13 x 23.6 x 1.18 inch each |
Kit ébénisterie prêt à l'assemblage, pour constituer un Scoop pour haut-parleur 18 pouce. Bois CP Bouleau de Finlande épaisseur 18 mm avec de nombreux renforts internes et une façade avant amovile et pleine laissant liberté d'intégration du haut-parleur.
Les points forts de ce kit ébénisterie :
- Assemblages rainurés, collés et vissés : grande durée de vie
- Pré-perçages des emplacements des vis à bois : gain de temps et travail propre
- Poignées intégrées dans la masse en partie arrière (en haut) et devant (en bas) : facilité de transport
- Roulettes de transport intégrées à l'arrière en partie basse, action des roulettes lorsqu'on incline le caisson : facilité de transport
- Réalisation des formes complexes intérieures par méthode de strato-conception : très grande stabilité du caisson même à fort niveau
- Colonne centrale de stabilité évidée : optimisation de la masse globale et rigidité de l'ensemble
- Façade avant amovile, fixation par seize vis M6 à tête fraisée : facilité d'intégration du haut-parleur 18 pouce au choix (attention profondeur limitée à 220 mm)
- Façade avant prête pour revoir une grille de protection : protection du haut-parleur lors d'utilisation en public
- Bornier arrière double Speakon Neutrik NL4MPR : flexibilité des raccordements
Caractéristiques :
- Nombre de panneaux : 95 au total
- Matériau des panneaux : Contre-plaqué Tout Bouleau de Finlande, qualité BB/BB, épaisseur 18 mm
- Poids total du caisson seul : ~82 kg
- Dimensions extérieures de la caisse une fois assemblée : H:1220mm, l:636mm, P:760mm
- Précision des découpes : +/- 0.25mm
- Pour haut-parleurs : Precision Devives PD.1850 ou Oberton 18XB1500 par exemple
- Option disponible : grille acier noir pour façade avant (voir GR20-SCOOP-18)
L'achat de ce kit est intéressant pour celui qui :
- possède déjà le haut-parleur Precision Devives PD.1850/2 ou Oberton 18XB1500
- souhaite "bricoler" le kit avec un d'autre haut-parleur 18 pouce (attention profondeur limité à 220 mm)
Pour assembler ce kit ébénisterie vous avez besoin des outils suivant :
- Plusieurs serre-joints (dont grande taille)
- Visseuse / dévisseuse
- Maillet
- Colle à bois (2 pots de 750gr R64 nécessaire en moyenne)
- Papier à poncer
- Ponceuse
- Défonceuse avec fraises concaves rayon 6 mm et 16 mm (facultatif)
- Vis à bois nécessaire au montage du kit ébénisterie (non fournit dans le kit) :
3.0 x 25 mm : 252 unités (voir VI-BOIS-3.0x25)
3.5 x 20 mm : 28 unités (voir VI-BOIS-3.5x20)
3.5 x 25 mm : 73 unités (voir VI-BOIS-3.5x25)
3.5 x 30 mm : 68 unités (voir VI-BOIS-3.5x30)
3.5 x 40 mm : 243 unités (voir VI-BOIS-3.5x40)
Pour installer le haut-parleur dans la façade amovible, vous avez besoin des outils et accessoires suivants :
- Scie sauteuse ou défonceuse pour découper l'emplacement dans la façade
- Perceuse avec foret pour perçer les trous de fixation
- Vis de fixation avec écrous à frapper (M8 ou M6 suivant le haut-parleur) pour fixer le haut-parleur
- Joint d'étanchéité (par exemple ME220) à placer entre le haut-parleur et la façade amovible
General |
|
Product type | Cabinet kit |
Brand | La-Planche-de-Bois.fr |
Reference | SCOOP-18 |
Informations |
|
DIY level | Expert |
Kit origin | TLHP |
Datas |
|
Weight | ~82 kg |
Shape & Materials |
|
Wood type | Birch plywood, BB/BB quality |
Edges type of panels | Straight edges |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
|
The price / performance ratio of a flat pack is unbeatable !
When you buy a complete loudspeaker on the standard market, you must know that the mounting and the finishing represent more than the half of the price.
Buying a enclosure flat pack reduce the price a lot because the mounting and the finish are not done. An enclosure flat pack kit costs between 3 and 5 times cheaper than a normal enclosure (mounted, predrilled and with finishing).
For the finish, if you are a good handyman you could bring a good finish level, similar as a complete loudspeaker finishedon the market, with furthermore the possibility to custom it as you want. Give free rein to your imagination, the possibilities are infinite (paint, lacquer, varnish, veneer ...).
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.