Fullrange speaker Fostex FE126En, 8 ohm, 117 x 117 mm
|
Fostex |
FE126En |
FE126EN-8 |
Cone driver |
|
|
Brand Fostex |
Model FE126En |
TLHP code FE126EN-8 |
|
|
Product type Cone driver |
|
||
Unavailable
-
ES cone and center cap are adapted. This new diaphragm material has the fine, supple and high density fiber, and its characteristics successfully improve
the mid-high frequency reproduction. ø100mm strong ferrite magnet is employed. Well tuned Qts / Mms values for ease of use in the back loaded horn enclosure.
General |
|
| Product type | Cone driver |
| Brand | Fostex |
| Reference | FE126En |
Informations |
|
| Nominal impedance | 8 ohm |
| Dimensional category | 4.5 inch |
| Frequency coverage type | Fullrange |
| Manufacturer sensitivity | 93 dB |
| Calculated sensitivity | 93.53 dB |
| Nominal power handling | 15 W |
| Bandwidth | 83÷25000 Hz |
Fundamental parameters |
|
| Mms | 2.8 gr |
| Le | 0.035 mH |
| Re | 7.2 ohm |
Small signal parameters |
|
| Fs | 83 Hz |
| Qes | 0.33 |
| Qms | 4.8 |
| Qts | 0.3 |
| Vas | 8.5 L |
Datas |
|
| Xmax | ±8.5 mm |
| EBP | 252 Hz |
| Fs / Qts | 277 Hz |
| Vas * Qts² | 0.77 L |
| Efficiency | 1.36 % |
| Calculated efficiency | 1.42 % |
| Weight | ~1.2 kg |
Dimensions |
|
| Voice coil diameter | 0.8 inch |
| External dimensions | 117 | 117 mm |
| Baffle cutout diameter | 102.2 mm |
| Front thickness | 3 mm |
| Depth after front | 58 mm |
| Diamètre aimant (mm) | 100 mm |
Shape & Materials |
|
| Front chape | Non cylindrical |
| Magnet type | Ferrite |
Question about Fostex FE126EN-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Fostex FE126EN-8, Range, version, replacement...
Informations Fostex FE126EN-8
ES cone and center cap are adapted. This new diaphragm material has the fine, supple and high density fiber, and its characteristics successfully improve
the mid-high frequency reproduction. ø100mm strong ferrite magnet is employed. Well tuned Qts / Mms values for ease of use in the back loaded horn enclosure.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
the mid-high frequency reproduction. ø100mm strong ferrite magnet is employed. Well tuned Qts / Mms values for ease of use in the back loaded horn enclosure.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes Fostex FE126EN-8
SPL vs Impedance measure
Dimensions
