Seas M15CH001 (8Ohm)

Brand 
SEAS
Model 
M15CH001
SKU 
M15CH001-8
Manufacturer code 
E0016-08
Product type 
Cone driver
Brand
SEAS
Model
M15CH001
TLHP code
M15CH001-8
Manufacturer code
E0016-08
Product type 
Cone driver

Unavailable

  • SPECIAL FEATURES:
    Perfectly matched polypropylene cone and high loss rubber surround for low colouration in the critical midband.
    Patented Hexadym magnet system of acoustically transparent design to avoid cavity resonances and air flow noise. The magnet system based on 6 small, radially magnetized Neodymium blocks is compact to reduce the reflexion of sound energy to a minimum.
    Heavy copper rings mounted above and below the T-shaped pole piece, to reduce non linear and modulation distortion and to increase overload margin.
    A solid copper phase plug to enhance the performance of the copper rings and improve heat conduction away from the pole piece.
    Gold plated terminals mounted on a stiff glass fibre reinforced plate to reduce contact resistance and improve reliability.
    Extremely stiff and stable injection moulded metal basket to keep the critical components in perfect alignment. Large windows in the basket both above and below the spider to reduce sound reflexion, air flow noise and cavity resonance to a minimum.

General

Product type Cone driver
Brand SEAS
Reference M15CH001
Product code E0016-08

Informations

Nominal impedance 8 ohm

Datas

Weight ~0.88 kg


Question about SEAS M15CH001-8

Ask a new question!

This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.


Informations SEAS M15CH001-8

SPECIAL FEATURES:
Perfectly matched polypropylene cone and high loss rubber surround for low colouration in the critical midband.
Patented Hexadym magnet system of acoustically transparent design to avoid cavity resonances and air flow noise. The magnet system based on 6 small, radially magnetized Neodymium blocks is compact to reduce the reflexion of sound energy to a minimum.
Heavy copper rings mounted above and below the T-shaped pole piece, to reduce non linear and modulation distortion and to increase overload margin.
A solid copper phase plug to enhance the performance of the copper rings and improve heat conduction away from the pole piece.
Gold plated terminals mounted on a stiff glass fibre reinforced plate to reduce contact resistance and improve reliability.
Extremely stiff and stable injection moulded metal basket to keep the critical components in perfect alignment. Large windows in the basket both above and below the spider to reduce sound reflexion, air flow noise and cavity resonance to a minimum.

All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.

Measures/Schemes SEAS M15CH001-8

SPL vs Impedance measure *

Image spl vs impedance measure cone driver SEAS Seas M15CH001 (8Ohm)

* Response curve recorded in anechoic chamber (Free-field


Distorsion measure *

Image distorsion measure cone driver SEAS Seas M15CH001 (8Ohm)

* Distortion on axis in % between 25 and 2000 Hz at operating power.


Dimensions

Image Drawing & Mounting cone driver SEAS Seas M15CH001 (8Ohm)
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x