Audax |
PR380T0 |
PR380T0-8 |
Cone driver |
Sold by piece |
|
Brand Audax |
Model PR380T0 |
TLHP code PR380T0-8 |
||
Product type Cone driver |
Sales packaging Sold by Piece |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 3 weeks
The extremely high efficiency (99 dB) is the result of the large diameter (7") magnet system coupled with a light, curvilinear cone. The flat, edgewound copper wire voice coil is mounted onto a fiberglass reinforced Kpaton former for exceptional power handling (150W). The magnet has vented pole piece and is heatsinked to the Zamack chassis to maximize heat dissipation. Gold plated binding posts fitted onto the Ultra stiff die cast chassis are designed to accept large diameter cables.
This 15" woofer is ideally suited for Bass-Reflex or Horn loading in high quality stage monitoring applications and club installations. The "suggested applications" charts indicate various driver loads. The response curves shown on the diagram indicate the predicted low end response of the driver in the suggested box volume (Vb) with suggested port (Dp-Lp).
General |
|
Product type | Cone driver |
Brand | Audax |
Reference | PR380T0 |
Informations |
|
Nominal impedance | 8 ohm |
Dimensional category | 15 inch |
Frequency coverage type | Low |
Manufacturer sensitivity | 99 dB |
Calculated sensitivity | 95.71 dB |
Nominal power handling | 150 W |
Fundamental parameters |
|
Sd | 892 cm² |
Mms | 79.5 gr |
Le | 0.65 mH |
Re | 6 ohm |
BL | 14.4 T.m |
Small signal parameters |
|
Fs | 52 Hz |
Qes | 0.75 |
Qms | 4.13 |
Qts | 0.64 |
Vas | 130 L |
Datas |
|
Flux density | 1.2 T |
Xmax | ±4.15 mm |
Calculated Xmax | ±6.4833 mm |
EBP | 69 Hz |
Zmin | 6.5 ohm |
Fs / Qts | 81 Hz |
Vas * Qts² | 53.25 L |
Calculated efficiency | 2.34 % |
Weight | ~8.4 kg |
Recommended load volume | 150 L |
Fréquence d'accord liée à la charge | 22 Hz |
Dimensions |
|
Voice coil diameter | 2.75 inch |
Winding depth | 15.3 mm |
Gap height | 7 mm |
Outside diameter | 386.5 mm |
Baffle cutout diameter | 356.5 mm |
Front thickness | 21 mm |
Depth after front | 108 mm |
Diamètre aimant (mm) | 189.5 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Ferrite |
Basket masterial | Zamak |
Winding material | Copper |
Voice coil former | Kapton |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.