Speaker Beyma 10MCB700, 8 ohm, 10 inch
|
Beyma |
10MCB700 |
10MCB700-8 |
110MCB708 |
Cone driver |
|
|
Brand Beyma |
Model 10MCB700 |
TLHP code 10MCB700-8 |
Manufacturer code 110MCB708 |
|
|
Product type Cone driver |
|
|||
-
The concept of the MCB family is high efficiency bass and mid/bass applications for high quality systems where high sensitivity, high linearity, low distortion and high total SPL are required.
High power handling: 1.400 W program power
Exclusive Malt Cross® Technology Cooling System
Low power compression losses
High sensitivity: 96 dB (1W / 1m)
FEA optimized magnetic circuit
Optimized non-linear behaviour
Waterproof cone treatment on both sides of the cone
3” DUO double layer in/out copper voice coil
Aluminium demodulating ring
Extended controlled displacement: Xmax ± 7 mm
45 mm peak-to-peak excursion before damage
Optimized for low frequency and mid-bass applications
General |
|
| Product type | Cone driver |
| Brand | Beyma |
| Reference | 10MCB700 |
| Product code | 110MCB708 |
Informations |
|
| Nominal impedance | 8 ohm |
| Dimensional category | 10.5 inch |
| Frequency coverage type | Midbass, Midrange |
| Manufacturer sensitivity | 96 dB |
| Calculated sensitivity | 93.86 dB |
| Nominal power handling | 700 W |
| Bandwidth | 80÷4000 Hz |
Fundamental parameters |
|
| Sd | 350 cm² |
| Mms | 55 gr |
| Le | 0.9 mH |
| Re | 5.3 ohm |
| BL | 20.1 T.m |
Small signal parameters |
|
| Fs | 75 Hz |
| Qes | 0.35 |
| Qms | 4.9 |
| Qts | 0.33 |
| Vas | 13.2 L |
Datas |
|
| Xmax | ±7 mm |
| Calculated Xmax | ±7.4167 mm |
| EBP | 214 Hz |
| Zmin | 7.1 ohm |
| Fs / Qts | 227 Hz |
| Vas * Qts² | 1.44 L |
| Efficiency | 1.7 % |
| Calculated efficiency | 1.53 % |
| Weight | ~7.6 kg |
| Demodulation ring | Yes |
Dimensions |
|
| Voice coil diameter | 3 inch |
| Winding depth | 18 mm |
| Gap height | 9.5 mm |
| Outside diameter | 261 mm |
| Baffle cutout diameter | 228 mm |
| Depth | 129 mm |
Shape & Materials |
|
| Front chape | Cylindrical |
| Magnet type | Ferrite |
| Basket masterial | Acier |
| Surround material | Cloth |
Question about Beyma 10MCB700-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Beyma 10MCB700-8, Range, version, replacement...
Informations Beyma 10MCB700-8
High power handling: 1.400 W program power
Exclusive Malt Cross® Technology Cooling System
Low power compression losses
High sensitivity: 96 dB (1W / 1m)
FEA optimized magnetic circuit
Optimized non-linear behaviour
Waterproof cone treatment on both sides of the cone
3” DUO double layer in/out copper voice coil
Aluminium demodulating ring
Extended controlled displacement: Xmax ± 7 mm
45 mm peak-to-peak excursion before damage
Optimized for low frequency and mid-bass applications
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes Beyma 10MCB700-8
SPL vs Impedance measure *
* Frequency response measured with loudspeaker standing on infinite baffle in anechoic chamber
Dimensions
