Speaker Beyma 12P80Fe, 8 ohm, 12 inch
|
Beyma |
12P80Fe |
12P80FE-8 |
112P80FE8 |
Cone driver |
|
|
Brand Beyma |
Model 12P80Fe |
TLHP code 12P80FE-8 |
Manufacturer code 112P80FE8 |
|
|
Product type Cone driver |
|
|||
Unavailable
-
1400 W program power
High sensitivity: 100 dB @ 2,83 V @ 1 m
FEA optimized magnetic circuit.
Designed with MMSS technology for high control, linearity and low harmonic distortion.
CONEX spider for higher resistance and consistency.
Waterproof treatment for both sides of the cone.
4" DUO double layer inner/outer voice coil.
Extended controlled displacement: Xmax ± 7,4 mm
Extended mechanical displacement capability: Xdamage ± 52 m
General |
|
| Product type | Cone driver |
| Brand | Beyma |
| Reference | 12P80Fe |
| Product code | 112P80FE8 |
Informations |
|
| Nominal impedance | 8 ohm |
| Dimensional category | 0.5 inch |
| Frequency coverage type | Sub, Low, Midbass |
| Manufacturer sensitivity | 100 dB |
| Calculated sensitivity | 97.75 dB |
| Nominal power handling | 700 W |
| Bandwidth | 25÷4000 Hz |
Fundamental parameters |
|
| Mms | 66 gr |
| Le | 1.5 mH |
| Re | 5.2 ohm |
Small signal parameters |
|
| Fs | 46 Hz |
| Qes | 0.189 |
| Qms | 10.14 |
| Qts | 0.185 |
| Vas | 75.55 L |
Datas |
|
| Xmax | ±7.4 mm |
| EBP | 243 Hz |
| Fs / Qts | 249 Hz |
| Vas * Qts² | 2.59 L |
| Efficiency | 3.78 % |
| Calculated efficiency | 3.74 % |
Dimensions |
|
| Voice coil diameter | 4 inch |
| Outside diameter | 12 mm |
| Baffle cutout diameter | 283 mm |
| Front thickness | 10 mm |
| Depth after front | 119 mm |
Shape & Materials |
|
| Front chape | Cylindrical |
| Magnet type | Ferrite |
Question about Beyma 12P80FE-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Repair Beyma 12P80FE-8
Informations Beyma 12P80FE-8
1400 W program power
High sensitivity: 100 dB @ 2,83 V @ 1 m
FEA optimized magnetic circuit.
Designed with MMSS technology for high control, linearity and low harmonic distortion.
CONEX spider for higher resistance and consistency.
Waterproof treatment for both sides of the cone.
4" DUO double layer inner/outer voice coil.
Extended controlled displacement: Xmax ± 7,4 mm
Extended mechanical displacement capability: Xdamage ± 52 m
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
High sensitivity: 100 dB @ 2,83 V @ 1 m
FEA optimized magnetic circuit.
Designed with MMSS technology for high control, linearity and low harmonic distortion.
CONEX spider for higher resistance and consistency.
Waterproof treatment for both sides of the cone.
4" DUO double layer inner/outer voice coil.
Extended controlled displacement: Xmax ± 7,4 mm
Extended mechanical displacement capability: Xdamage ± 52 m
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes Beyma 12P80FE-8
SPL vs Distorsion measure *
* On axis frequency response measured with loudspeaker standing on infinite baffle in anechoic chamber
Impedance measure
Dimensions
