Speaker Oberton 15MB700, 8 ohm, 15 inch
|
Oberton |
15MB700 |
15MB700-OBERTON-8 |
11115F0308 KTL Magnet + system Silver frame |
Cone driver |
|
|
Brand Oberton |
Model 15MB700 |
TLHP code 15MB700-OBERTON-8 |
Manufacturer code 11115F0308 KTL Magnet + system Silver frame |
|
|
Product type Cone driver |
|
|||
-
15MB700 loudspeaker combining good linearity and efficiency with high power handling capabilities, with use of 100 mm copper voice coil and double silicone spider.
It features aluminium die cast frame, vented ferrite magnet structure with two demodulating rings. 15MB700 is suitable for application in a wide variety of enclosure types and particularly as LF driver in 2- or 3- way boxes.
Application : High power midbass
KEY FEATURES :
97.5 db 1W / 1m average sensitivity
100 mm high temperature copper voice coil
1400 W AES program power
Vented ferrite magnet assembly
Two aluminium demodulating rings for lower distortion and improved heat dissipation
Double silicone spider
General |
|
| Product type | Cone driver |
| Brand | Oberton |
| Reference | 15MB700 |
| Product code | 11115F0308 KTL Magnet + system Silver frame |
Informations |
|
| Nominal impedance | 8 ohm |
| Dimensional category | 15.5 inch |
| Frequency coverage type | Sub, Low, Midbass |
| Manufacturer sensitivity | 97.5 dB |
| Calculated sensitivity | 96.85 dB |
| Nominal power handling | 700 W |
| Bandwidth | 45÷2500 Hz |
Fundamental parameters |
|
| Mms | 124.1 gr |
| Le | 0.92 mH |
| Re | 5.4 ohm |
Small signal parameters |
|
| Fs | 44.24 Hz |
| Qes | 0.274 |
| Qms | 12.03 |
| Qts | 0.268 |
| Vas | 100.22 L |
Datas |
|
| Xmax | ±9.25 mm |
| EBP | 161 Hz |
| Fs / Qts | 165 Hz |
| Vas * Qts² | 7.2 L |
| Calculated efficiency | 3.05 % |
| Weight | ~10.5 kg |
Dimensions |
|
| Voice coil diameter | 4 inch |
| Outside diameter | 388 mm |
| Baffle cutout diameter | 354 mm |
| Front thickness | 15.7 mm |
| Depth after front | 160.7 mm |
Shape & Materials |
|
| Front chape | Cylindrical |
| Magnet type | Ferrite |
Question about Oberton 15MB700-OBERTON-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Repair Oberton 15MB700-OBERTON-8
Informations Oberton 15MB700-OBERTON-8
It features aluminium die cast frame, vented ferrite magnet structure with two demodulating rings. 15MB700 is suitable for application in a wide variety of enclosure types and particularly as LF driver in 2- or 3- way boxes.
Application : High power midbass
KEY FEATURES :
97.5 db 1W / 1m average sensitivity
100 mm high temperature copper voice coil
1400 W AES program power
Vented ferrite magnet assembly
Two aluminium demodulating rings for lower distortion and improved heat dissipation
Double silicone spider
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes Oberton 15MB700-OBERTON-8
SPL vs Impedance measure
Dimensions
