Speaker Oberton 18XB1300, 8 ohm, 18 inch
|
Oberton |
18XB1300 |
18XB1300-8 |
Cone driver |
|
|
Brand Oberton |
Model 18XB1300 |
TLHP code 18XB1300-8 |
|
|
Product type Cone driver |
|
||
-
The 18XB1300 ferrite bass loudspeaker is specially designed to deliver very high impact bass response, with exceptional high power capacity.
It incorporates an 4" sandwich voice coil, double silicone spider assembly, carbone paper cone and die cast vented aluminium frame. Powerful, vented ferrite magnetic structure with double demodulating rings which reduced power compression. The result is high efficient transducer for subwoofer applications, with the ability to handle very high excursion with low distortion and reduced thermal power compression.
Application : High Power Bass
KEY FEATURES :
97.5 db 1W / 1m average sensitivity
100 mm high temperature sandwich voice coil
2600 W AES program power
Powerful, vented ferrite magnet structure
Double aluminium demodulating ring for lower THD and improved heat dissipation
Double silicone spider for improved excursion control and linearity
Water protected cone (front)
General |
|
| Product type | Cone driver |
| Brand | Oberton |
| Reference | 18XB1300 |
Informations |
|
| Nominal impedance | 8 ohm |
| Dimensional category | 18 inch |
| Frequency coverage type | Sub, Low |
| Manufacturer sensitivity | 97.5 dB |
| Calculated sensitivity | 96.21 dB |
| Nominal power handling | 1300 W |
| Bandwidth | 30÷1000 Hz |
Fundamental parameters |
|
| Mms | 206.35 gr |
| Le | 1.92 mH |
| Re | 5.2 ohm |
Small signal parameters |
|
| Fs | 36.16 Hz |
| Qes | 0.296 |
| Qms | 9.56 |
| Qts | 0.287 |
| Vas | 170.92 L |
Datas |
|
| Xmax | ±11.5 mm |
| EBP | 122 Hz |
| Fs / Qts | 126 Hz |
| Vas * Qts² | 14.08 L |
| Calculated efficiency | 2.63 % |
| Weight | ~12.9 kg |
Dimensions |
|
| Voice coil diameter | 4 inch |
| Outside diameter | 461 mm |
| Baffle cutout diameter | 417 mm |
| Front thickness | 18.5 mm |
| Depth after front | 186.5 mm |
| Diamètre aimant (mm) | 220 mm |
Shape & Materials |
|
| Front chape | Cylindrical |
| Magnet type | Ferrite |
Question about Oberton 18XB1300-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Oberton 18XB1300-8, Range, version, replacement...
Informations Oberton 18XB1300-8
It incorporates an 4" sandwich voice coil, double silicone spider assembly, carbone paper cone and die cast vented aluminium frame. Powerful, vented ferrite magnetic structure with double demodulating rings which reduced power compression. The result is high efficient transducer for subwoofer applications, with the ability to handle very high excursion with low distortion and reduced thermal power compression.
Application : High Power Bass
KEY FEATURES :
97.5 db 1W / 1m average sensitivity
100 mm high temperature sandwich voice coil
2600 W AES program power
Powerful, vented ferrite magnet structure
Double aluminium demodulating ring for lower THD and improved heat dissipation
Double silicone spider for improved excursion control and linearity
Water protected cone (front)
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes Oberton 18XB1300-8
SPL vs Impedance measure
Dimensions
