Peerless |
FSL-1225R02-08 |
Cone driver |
|
Brand Peerless |
TLHP code FSL-1225R02-08 |
|
Product type Cone driver |
|
This 12 inch 8 ohm speaker, features a FEA optimized ferrite magnet motor, a 2.5 inch high-temperature voice coil, a vented yoke for motor cooling, and a high strength stamped steel frame.
It also features Kevlar loaded non-pressed paper cone to help dampen and control cone resonance. The multi-roll surround and spider have been optimized to reduce distortion over the excursion range of this transducer.
General |
|
Product type | Cone driver |
Brand | Peerless |
Informations |
|
Nominal impedance | 8 ohm |
Dimensional category | 12.5 inch |
Frequency coverage type | Low |
Manufacturer sensitivity | 96.5 dB |
Calculated sensitivity | 96.19 dB |
Nominal power handling | 350 W |
Fundamental parameters |
|
Mms | 51.4 gr |
Le | 0.71 mH |
Re | 5.45 ohm |
Small signal parameters |
|
Fs | 59.07 Hz |
Qes | 0.45 |
Qms | 4.31 |
Qts | 0.41 |
Vas | 59.41 L |
Datas |
|
Xmax | ±2.5 mm |
EBP | 131 Hz |
Fs / Qts | 144 Hz |
Vas * Qts² | 9.99 L |
Calculated efficiency | 2.62 % |
Weight | ~5.7 kg |
Dimensions |
|
Voice coil diameter | 2.5 inch |
Outside diameter | 313.5 mm |
Baffle cutout diameter | 277 mm |
Front thickness | 9.25 mm |
Depth after front | 125.5 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Ferrite |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.