Speaker Peerless SDS-135F25CP02-04, 4 ohm, 5.98 inch
|
Peerless |
SDS-135F25CP02-04 |
Cone driver |
|
|
Brand Peerless |
TLHP code SDS-135F25CP02-04 |
|
|
Product type Cone driver |
|
|
Unavailable
-
This 5.25 inch 4 ohm member of the SDS family offer a coated paper cone with rubber surround, a high power voice coil suspended in a ferrite magnet motor, and a narrow-profile steel basket shaped to fit into narrow cabinets.
The SDS compact subwoofer family offers low resonant frequency performance, ideally suited for compact sealed enclosures.
General |
|
| Product type | Cone driver |
| Brand | Peerless |
Informations |
|
| Nominal impedance | 4 ohm |
| Dimensional category | 6 inch |
| Frequency coverage type | Low |
| Manufacturer sensitivity | 86.18 dB |
| Calculated sensitivity | 84.07 dB |
| Nominal power handling | 50 W |
Fundamental parameters |
|
| Sd | 86.6 cm² |
| Mms | 20.8 gr |
| Cms | 369 µm/N |
| Le | 1.22 mH |
| Re | 3.3 ohm |
| BL | 7.39 T.m |
Small signal parameters |
|
| Fs | 57.7 Hz |
| Qes | 0.45 |
| Qms | 3.89 |
| Qts | 0.41 |
| Vas | 3.91 L |
Datas |
|
| Xmax | ±5.2 mm |
| EBP | 128 Hz |
| Zmin | 4.45 ohm |
| Fs / Qts | 141 Hz |
| Vas * Qts² | 0.66 L |
| Calculated efficiency | 0.17 % |
| Weight | ~0.98 kg |
Dimensions |
|
| Voice coil diameter | 1 inch |
| Winding depth | 6 mm |
| Outside diameter | 152 mm |
| Front thickness | 8.2 mm |
| Depth after front | 65.2 mm |
| Diamètre aimant (mm) | 80 mm |
Shape & Materials |
|
| Front chape | Cylindrical |
| Magnet type | Ferrite |
| Basket masterial | Acier |
| Voice coil former | Aluminium |
| Surround material | Rubber |
Question about Peerless SDS-135F25CP02-04
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Use Peerless SDS-135F25CP02-04
|
|
With Peerless SDS-135F25CP02-04, customers has also bought
Informations Peerless SDS-135F25CP02-04
This 5.25 inch 4 ohm member of the SDS family offer a coated paper cone with rubber surround, a high power voice coil suspended in a ferrite magnet motor, and a narrow-profile steel basket shaped to fit into narrow cabinets.
The SDS compact subwoofer family offers low resonant frequency performance, ideally suited for compact sealed enclosures.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
The SDS compact subwoofer family offers low resonant frequency performance, ideally suited for compact sealed enclosures.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes Peerless SDS-135F25CP02-04
SPL vs Impedance measure
Dimensions
