Speaker RCF LF21N551, 8 ohm, 21.54 inch

Brand 
RCF
Model 
LF21N551
SKU 
LF21N551-8
Manufacturer code 
11100076
Product type 
Cone driver
Brand
RCF
Model
LF21N551
TLHP code
LF21N551-8
Manufacturer code
11100076
Product type 
Cone driver

Unavailable

  • 3600 Watts continuous prgram power handling
    5.3 inch Inside/Outside copper voice coil
    97 dB Sensivity
    30 Hz - 1 kHz Frequency range
    Dual-forced air ventilation
    Dual spider designed with silicon based damping control
    72 mm peak to peak excursion
    39 T/m BL

    The LF21N551 is very high power handling 21" neodymium woofer. The combinaison of a 3600 Watts power handling and a minimum weight of 13.7 kg makes this transducer a unique product in his category.
    The transducer design is based on a very strong neodymium magnetic structure and a new 5.3" inside-outside copper coil.
    The new Dual forced design provide an excellent heat dissipation and lower power compression. Special air-forced ventilations are provided for voice coil, magnet assembly and basket.

    The combinaison of carbon fibre loaded cone assembly, large triple roll surround, double silicon spider provides to the LF21N551 remarkable strength and best control under large excursion conditions.
    A fully optimised T-pole design generate the minimum amount of flux modulation offering a peak to peak excursion of 72 mm.
    The waterproof doby cone treatment and polycotton curround ensure a durable performance in every application.

    Applications :
    The LF21N551 is ideal in applications where combinations of maximum power handling, light weight and ultra fast time response are required.
    Perfect for powerful lows in horn loaded sub bass systems or reflex designs. Ideal for touring, find a perfect application in high power, heavy duty, club subwoofer systems.

General

Product type Cone driver
Brand RCF
Reference LF21N551
Product code 11100076

Informations

Nominal impedance 8 ohm
Dimensional category 21 inch
Frequency coverage type Sub, Low
Manufacturer sensitivity 97 dB
Calculated sensitivity 95.74 dB
Nominal power handling 2000 W
Bandwidth 30÷1000 Hz

Fundamental parameters

Sd 1700 cm²
Mms 434 gr
Le 3.2 mH
Re 5.2 ohm
BL 39 T.m

Small signal parameters

Fs 35 Hz
Qes 0.35
Qms 6.2
Qts 0.33
Vas 200 L

Datas

Xmax ±15 mm
Calculated Xmax ±16.5 mm
EBP 100 Hz
Zmin 7 ohm
Fs / Qts 106 Hz
Vas * Qts² 21.78 L
Efficiency 2.4 %
Calculated efficiency 2.36 %
Weight ~16.5 kg

Dimensions

Voice coil diameter 5.3" inch
Winding depth 39 mm
Gap height 18 mm
Outside diameter 547 mm
Baffle cutout diameter 508 mm
Front thickness 20.5 mm
Depth after front 244.9 mm
Diamètre aimant (mm) 170 mm

Shape & Materials

Front chape Cylindrical
Magnet type Neodymium
Basket masterial Aluminium
Winding material Copper
Surround material Cloth


Question about RCF LF21N551-8

Ask a new question!

This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.


Informations RCF LF21N551-8

3600 Watts continuous prgram power handling
5.3 inch Inside/Outside copper voice coil
97 dB Sensivity
30 Hz - 1 kHz Frequency range
Dual-forced air ventilation
Dual spider designed with silicon based damping control
72 mm peak to peak excursion
39 T/m BL

The LF21N551 is very high power handling 21" neodymium woofer. The combinaison of a 3600 Watts power handling and a minimum weight of 13.7 kg makes this transducer a unique product in his category.
The transducer design is based on a very strong neodymium magnetic structure and a new 5.3" inside-outside copper coil.
The new Dual forced design provide an excellent heat dissipation and lower power compression. Special air-forced ventilations are provided for voice coil, magnet assembly and basket.

The combinaison of carbon fibre loaded cone assembly, large triple roll surround, double silicon spider provides to the LF21N551 remarkable strength and best control under large excursion conditions.
A fully optimised T-pole design generate the minimum amount of flux modulation offering a peak to peak excursion of 72 mm.
The waterproof doby cone treatment and polycotton curround ensure a durable performance in every application.

Applications :
The LF21N551 is ideal in applications where combinations of maximum power handling, light weight and ultra fast time response are required.
Perfect for powerful lows in horn loaded sub bass systems or reflex designs. Ideal for touring, find a perfect application in high power, heavy duty, club subwoofer systems.

All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.

Measures/Schemes RCF LF21N551-8

SPL measure *

Image spl measure cone driver RCF Speaker RCF LF21N551, 8 ohm, 21.54 inch

* Frequency response curve of the loudspeaker taken in a hemispherical


Impedance measure

Image impedance measure cone driver RCF Speaker RCF LF21N551, 8 ohm, 21.54 inch

Dimensions

Image Drawing & Mounting cone driver RCF Speaker RCF LF21N551, 8 ohm, 21.54 inch
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x