Speaker SEAS U22REX/P-SL, 8 ohm, 8.66 inch

Brand 
SEAS
Model 
U22REX/P-SL
SKU 
U22REX/P-SL-8
Manufacturer code 
H1659-08
Product type 
Cone driver
Sales packaging 
Sold by piece
Brand
SEAS
Model
U22REX/P-SL
TLHP code
U22REX/P-SL-8
Manufacturer code
H1659-08
Product type 
Cone driver
Sales packaging 
Sold by Piece
Recommended retail price
€244.20
TLHP selling price
197.51IT/piece
excluding delivery service
Save
19%

Simulate shipping costs and VAT
In stock: 4 pieces

If you want to purchase more than the quantity in stock, have a look at the supply time below :

Indicative average supply lead time: 5 weeks
90 days to change your mind !
learn more
Qty

  • U22REX/P-SL is a 8" High Fidelity woofer with an injection moulded metal chassis, intended for bass reflex and transmission line designs.

    New Curv cone, a woven polypropylene with excellent internal damping together with perfectly matched moving parts gives a smooth, extended frequency response.

    Bumped back plate in the magnet system together with a high temperature voice coil wound on an aluminium voice coil former gives low distortion and high power handling capacity. Heavy copper ring below the T-shaped pole piece will reduce non linear and modulation distortion.

    Bullet shaped phase plug reduces compression due to temperature variations in the voice coil, avoids resonance problems which would occur in the volume between the dust cap and the pole piece and increases the long term power handling capacity.

    Extremely stiff and stable injection moulded metal basket, keeps the critical components in perfect alignment. Large windows in the basket both above and below the spider reduce sound reflection, air flow noise and cavity resonance to a minimum.

General

Product type Cone driver
Brand SEAS
Reference U22REX/P-SL
Product code H1659-08

Informations

Product manufacturer range 22 cm, Prestige, Woofer
Nominal impedance 8 ohm
Dimensional category 8.5 inch
Frequency coverage type Sub, Low, Midbass
Manufacturer sensitivity 90.5 dB
Calculated sensitivity 90.53 dB
Nominal power handling 100 W
Max power handling 250 W
Bandwidth 29÷4000 Hz

Fundamental parameters

Sd 220 cm²
Mms 19.8 gr
Cms 1700 µm/N
Rms 2.1 kg/s
Le 0.7 mH
Re 6 ohm
BL 8 T.m

Small signal parameters

Fs 29 Hz
Qes 0.34
Qms 1.77
Qts 0.29
Vas 103 L

Datas

Flux density 1 T
Xmax ±4 mm
Calculated Xmax ±6 mm
Xvar, Xmech, Xlim ±10 mm
EBP 85 Hz
Fs / Qts 100 Hz
Vas * Qts² 8.67 L
Calculated efficiency 0.71 %
Weight ~2.2 kg

Dimensions

Voice coil diameter 1.54 inch
Winding depth 14 mm
Gap height 6 mm
Outside diameter 220.6 mm
Baffle cutout diameter 186.4 mm
Depth 95.5 mm
Front thickness 5.5 mm
Depth after front 90 mm
Diamètre aimant (mm) 110 mm

Shape & Materials

Front chape Cylindrical
Magnet type Ferrite
Basket masterial Acier
Voice coil former Aluminium
Surround shape One roll
Surround material Rubber
Cone material Polypropylen


Question about SEAS U22REX/P-SL-8

Ask a new question!

This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.


With SEAS U22REX/P-SL-8, customers has also bought

Informations SEAS U22REX/P-SL-8

U22REX/P-SL is a 8" High Fidelity woofer with an injection moulded metal chassis, intended for bass reflex and transmission line designs.

New Curv cone, a woven polypropylene with excellent internal damping together with perfectly matched moving parts gives a smooth, extended frequency response.

Bumped back plate in the magnet system together with a high temperature voice coil wound on an aluminium voice coil former gives low distortion and high power handling capacity. Heavy copper ring below the T-shaped pole piece will reduce non linear and modulation distortion.

Bullet shaped phase plug reduces compression due to temperature variations in the voice coil, avoids resonance problems which would occur in the volume between the dust cap and the pole piece and increases the long term power handling capacity.

Extremely stiff and stable injection moulded metal basket, keeps the critical components in perfect alignment. Large windows in the basket both above and below the spider reduce sound reflection, air flow noise and cavity resonance to a minimum.
Manufacturer SEAS
Name Speaker SEAS U22REX/P-SL, 8 ohm, 8.66 inch
SKU U22REX/P-SL-8
Impedance 8 Ohm
Seller TLHP
Price 197.51 164.59
Availability In stock


All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.

Measures/Schemes SEAS U22REX/P-SL-8

SPL vs Impedance measure *

Image spl vs impedance measure cone driver SEAS Speaker SEAS U22REX/P-SL, 8 ohm, 8.66 inch

* The frequency responses above show measured free field sound pressure in 0


Dimensions

Image Drawing & Mounting cone driver SEAS Speaker SEAS U22REX/P-SL, 8 ohm, 8.66 inch

Garantie

This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.

This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x