Compression driver Kartesian Cmp45_vTLHP, 8 ohm, 1-inch exit
|
.Kartesian |
Cmp45_vTLHP |
CMP45_VTLHP-8 |
Compression driver |
Sold by piece |
|
|
Brand .Kartesian |
Model Cmp45_vTLHP |
TLHP code CMP45_VTLHP-8 |
||
|
Product type Compression driver |
Sales packaging Sold by Piece |
|
||
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 10 weeks
learn more
-
High quality compression driver, engineered to work in coaxial system with PHL midrange 2534NdM-TLHP.
Cmp45_vTLHP has been engineered to work in coaxial configuration, in association with PHL midrange.
In this way, the phase plug is specific with 2 openings and the output angle to match the midrange throat and cone profile.
Usual Kartesian design has been integrated, such as advanced pole piece, Al ring, or Pe-Ma diaphragm.
General |
|
| Product type | Compression driver |
| Brand | .Kartesian |
| Reference | Cmp45_vTLHP |
Informations |
|
| Product manufacturer range | 45, Compression driver, vTLHP |
| Nominal impedance | 8 ohm |
| Dimensional category | 4.5 inch |
| Manufacturer sensitivity | 102 dB |
| Nominal power handling | 60 W |
| Max power handling | 100 W |
| Bandwidth | 1200÷20000 Hz |
| Recommended min cutoff frequency | 1600 Hz |
| Exit dimension | 1.0 inch |
Fundamental parameters |
|
| Sd | 15 cm² |
| Mms | 0.49 gr |
| Re | 5.8 ohm |
| BL | 6.8 T.m |
Small signal parameters |
|
| Fs | 1200 Hz |
Datas |
|
| Xmax | ±0.4 mm |
| Xvar, Xmech, Xlim | ±0.55 mm |
| Demodulation ring | Yes |
Dimensions |
|
| Voice coil diameter | 1.77 inch |
| Outside diameter | 120 mm |
| Depth | 63 mm |
| Diamètre aimant (mm) | 120 mm |
| Driver dimensions mouting holes | 6.0 mm |
| Driver dimensions mouting holes N°2 | M6 |
| Driver mounting system | 2 points on diameter 76 mm |
| Driver mounting system N°2 | 3 points on diameter 76 mm |
Shape & Materials |
|
| Front chape | Cylindrical |
| Magnet type | Ferrite |
| Winding material | CCAW (Copper-clad aluminium wire) |
| Diaphragm former material | Polyimide |
| Diaphragm material | Polyethylene + Magnesium |
Question about .Kartesian CMP45_VTLHP-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
.Kartesian CMP45_VTLHP-8, Range, version, replacement...
Use .Kartesian CMP45_VTLHP-8
|
|
With .Kartesian CMP45_VTLHP-8, customers has also bought
Informations .Kartesian CMP45_VTLHP-8
Cmp45_vTLHP has been engineered to work in coaxial configuration, in association with PHL midrange.
In this way, the phase plug is specific with 2 openings and the output angle to match the midrange throat and cone profile.
Usual Kartesian design has been integrated, such as advanced pole piece, Al ring, or Pe-Ma diaphragm.
Name Compression driver Kartesian Cmp45_vTLHP, 8 ohm, 1-inch exit
SKU CMP45_VTLHP-8
Price € 173.90 144.92
Availability In stock
Buy Compression driver Kartesian Cmp45_vTLHP, 8 ohm, 1-inch exit
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes .Kartesian CMP45_VTLHP-8
SPL vs Impedance measure
Dimensions
Garantie
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.
