Speaker Kartesian Wom300_vDIY, 8 ohm, 12 inch
|
.Kartesian |
Wom300_vDIY |
WOM300_VDIY-8 |
Cone driver |
Sold by piece |
|
|
Brand .Kartesian |
Model Wom300_vDIY |
TLHP code WOM300_VDIY-8 |
||
|
Product type Cone driver |
Sales packaging Sold by Piece |
|
||
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 10 weeks
learn more
-
Wom300_vDIY is a 12inch woofer, dedicated to passionate and DIY community.
The motor structure is based on 170mm diameter Fe magnet, it uses 2 Aluminum rings and advanced pole pieces geometry to get symmetric and linear force factor and inductance. Membrane has been engineered with FEA. It is made of pressed paper with handmade in France treatment, and Carbone fiber dust cap. The typical use case is a 2 ways high-efficiency system using compression driver for upper frequency. We suggest to associate the Wom300_vDIY with the Cmp50_vPA-S (crossover point around 1500Hz) or with Cmp65_vPA (crossover point around 900Hz).
General |
|
| Product type | Cone driver |
| Brand | .Kartesian |
| Reference | Wom300_vDIY |
Informations |
|
| Product manufacturer range | Wom, 300, vDIY (Do It Yourself) |
| Nominal impedance | 8 ohm |
| Dimensional category | 12.5 inch |
| Frequency coverage type | Sub |
| Calculated sensitivity | 92.68 dB |
| Nominal power handling | 250 W |
| Max power handling | 600 W |
| Recommended max cutoff frequency | 900 | 1500 Hz |
Fundamental parameters |
|
| Sd | 511 cm² |
| Mms | 75 gr |
| Re | 5.3 ohm |
| BL | 15.62 T.m |
Small signal parameters |
|
| Fs | 37 Hz |
| Qes | 0.38 |
| Qms | 7.2 |
| Qts | 0.36 |
| Vas | 91 L |
Datas |
|
| Xmax | ±6 mm |
| Xvar, Xmech, Xlim | ±9 mm |
| EBP | 97 Hz |
| Fs / Qts | 103 Hz |
| Vas * Qts² | 11.8 L |
| Calculated efficiency | 1.17 % |
Dimensions |
|
| Voice coil diameter N°2 | 2.56 inch |
| Outside diameter | 322 mm |
| Baffle cutout diameter | 286 mm |
| Depth | 151.7 mm |
| Front thickness | 12.7 mm |
| Depth after front | 139 mm |
| Diamètre aimant (mm) | 170 mm |
Shape & Materials |
|
| Front chape | Cylindrical |
| Magnet type | Ferrite |
| Basket masterial | Aluminium |
| Winding material | Copper |
| Voice coil former | Glass fiber |
| Surround shape | Triple roll |
| Surround material | Cloth |
Question about .Kartesian WOM300_VDIY-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
.Kartesian WOM300_VDIY-8, Range, version, replacement...
With .Kartesian WOM300_VDIY-8, customers has also bought
Informations .Kartesian WOM300_VDIY-8
The motor structure is based on 170mm diameter Fe magnet, it uses 2 Aluminum rings and advanced pole pieces geometry to get symmetric and linear force factor and inductance. Membrane has been engineered with FEA. It is made of pressed paper with handmade in France treatment, and Carbone fiber dust cap. The typical use case is a 2 ways high-efficiency system using compression driver for upper frequency. We suggest to associate the Wom300_vDIY with the Cmp50_vPA-S (crossover point around 1500Hz) or with Cmp65_vPA (crossover point around 900Hz).
Name Speaker Kartesian Wom300_vDIY, 8 ohm, 12 inch
SKU WOM300_VDIY-8
Price € 307.20 256
Availability In stock
Buy Speaker Kartesian Wom300_vDIY, 8 ohm, 12 inch
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes .Kartesian WOM300_VDIY-8
SPL vs Impedance measure
SPL vs Distorsion measure
Dimensions
Garantie
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.
