Shop By
Price
  1.  
    63
    201
Cms
  1.  
    1500 µm/N
    2790 µm/N
Sd
  1.  
    50 cm²
    119 cm²
Manufacturer sensitivity
  1.  
    88.00 dB
    92.50 dB
Calculated sensitivity
  1.  
    87.23 dB
    89.18 dB
Re
  1.  
    3 ohm
    7 ohm
Qts
  1.  
    230
    320
Calculated efficiency
  1.  
    0.34 %
    0.52 %
Vas
  1.  
    5 L
    48 L
Vas * Qts²
  1.  
    0 L
    4 L
Xmax
  1.  
    3.87 mm
    4.77 mm
Calculated Xmax
  1.  
    3.87 mm
    4.77 mm
Qms
  1.  
    2800
    5110
Qes
  1.  
    250
    350
BL
  1.  
    3.90 T.m
    6.50 T.m
Mms
  1.  
    4 gr
    12 gr
Nominal power handling
  1.  
    30 W
    50 W
EBP
  1.  
    100 Hz
    181 Hz
Fs
  1.  
    31 Hz
    64 Hz
Fs / Qts
  1.  
    107 Hz
    198 Hz
Le
  1.  
    0 mH
    1 mH
Weight
  1.  
    0.0 kg
    1.0 kg

Midrange

Items 1 to 8 of 9 total

per page
Set Ascending Direction
Page:
  1. 1
  2. 2


SB Acoustics
SATORI_MR13P-4

178.25 IT/piece
In stock
Speaker SB Acoustics Satori MR13P-4, impedance 4 ohm, 5 inch
4 ohm
Speaker SB Acoustics Satori MR13P-4, impedance 4 ohm, 5 inch

Vented aerodynamic cast aluminium chassis for optimum strength and low compression. Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house. Soft low damping rubber surround for optimum transient response. Advanced BIMAX spider for improved linearity. Powerful optimized low distortion neodymium motor system. Non-conducting fibre glass voice coil former for minimum damping. Extended copper sleeve on pole piece for low inductance and reduced distortion. CCAW voice coil for reduced moving mass. Long life silver lead wires attached 180° apart for improved stability. Vented pole piece and coil former for reduced compression. High piston to chassis diameter ratio. Gasket and bolt hole protrusions for reduced coupling to speaker cabinet.

SB Acoustics
SATORI_MR16P-8

192.87 IT/piece
In stock
Speaker SB Acoustics Satori MR16P-8, impedance 8 ohm, 6.5 inch
8 ohm
Speaker SB Acoustics Satori MR16P-8, impedance 8 ohm, 6.5 inch

Vented aerodynamic cast aluminium chassis for optimum strength and low compression Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house Soft low damping rubber surround for optimum transient response Advanced BIMAX spider for improved linearity Powerful optimized low distortion neodymium motor system Non-conducting fibre glass voice coil former for minimum damping Extended copper sleeve on pole piece for low inductance and reduced distortion CCAW voice coil for reduced moving mass Long life silver lead wires attached 180° apart for improved stability Vented pole piece and coil former for reduced compression High piston to chassis diameter ratio Gasket and bolt hole protrusions for reduced coupling to speaker cabinet Mode balanced cone to reduced break-up

SB Acoustics
SATORI_MR13PNW-8

178.25 IT/piece
In stock
Speaker SB Acoustics Satori MR13PNW-8, impedance 8 ohm, 5 inch
8 ohm
Speaker SB Acoustics Satori MR13PNW-8, impedance 8 ohm, 5 inch

Vented aerodynamic cast aluminium chassis for optimum strength and low compression. Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house. Soft low damping rubber surround for optimum transient response. Advanced BIMAX spider for improved linearity. Powerful optimized low distortion neodymium motor system. Non-conducting fibre glass voice coil former for minimum damping. Extended copper sleeve on pole piece for low inductance and reduced distortion. CCAW voice coil for reduced moving mass. Long life silver lead wires attached 180° apart for improved stability. Vented pole piece and coil former for reduced compression. High piston to chassis diameter ratio. Gasket and bolt hole protrusions for reduced coupling to speaker cabinet.

SB Acoustics
SB12MNRX2_25-4

60.78 IT/piece
In stock
Speaker SB Acoustics SB12MNRX2-25-4, impedance 4 ohm, 4 inch
4 ohm
Speaker SB Acoustics SB12MNRX2-25-4, impedance 4 ohm, 4 inch

SB Acoustics
SATORI_MR13P-8

178.25 IT/piece
In stock
Speaker SB Acoustics Satori MR13P-8, impedance 8 ohm, 5 inch
8 ohm
Speaker SB Acoustics Satori MR13P-8, impedance 8 ohm, 5 inch

Vented aerodynamic cast aluminium chassis for optimum strength and low compression. Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house. Soft low damping rubber surround for optimum transient response. Advanced BIMAX spider for improved linearity. Powerful optimized low distortion neodymium motor system. Non-conducting fibre glass voice coil former for minimum damping. Extended copper sleeve on pole piece for low inductance and reduced distortion. CCAW voice coil for reduced moving mass. Long life silver lead wires attached 180° apart for improved stability. Vented pole piece and coil former for reduced compression. High piston to chassis diameter ratio. Gasket and bolt hole protrusions for reduced coupling to speaker cabinet.

SB Acoustics
SATORI_MR16PNW-4

192.87 IT/piece
In stock
Speaker SB Acoustics Satori MR16PNW-4, impedance 4 ohm, 6.5 inch
4 ohm
Speaker SB Acoustics Satori MR16PNW-4, impedance 4 ohm, 6.5 inch

Vented aerodynamic cast aluminium chassis for optimum strength and low compression Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house Soft low damping rubber surround for optimum transient response Advanced BIMAX spider for improved linearity Powerful optimized low distortion neodymium motor system Non-conducting fibre glass voice coil former for minimum damping Extended copper sleeve on pole piece for low inductance and reduced distortion CCAW voice coil for reduced moving mass Long life silver lead wires attached 180° apart for improved stability Vented pole piece and coil former for reduced compression High piston to chassis diameter ratio Gasket and bolt hole protrusions for reduced coupling to speaker cabinet Mode balanced cone for reduced break-up

SB Acoustics
SATORI_MR16P-4

192.87 IT/piece
In stock
Speaker SB Acoustics Satori MR16P-4, impedance 4 ohm, 6.5 inch
4 ohm
Speaker SB Acoustics Satori MR16P-4, impedance 4 ohm, 6.5 inch

Vented aerodynamic cast aluminium chassis for optimum strength and low compression. Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house. Soft low damping rubber surround for optimum transient response. Advanced BIMAX spider for improved linearity. Powerful optimized low distortion neodymium motor system. Non-conducting fibre glass voice coil former for minimum damping. Extended copper sleeve on pole piece for low inductance and reduced distortion. CCAW voice coil for reduced moving mass. Long life silver lead wires attached 180° apart for improved stability. Vented pole piece and coil former for reduced compression. High piston to chassis diameter ratio. Gasket and bolt hole protrusions for reduced coupling to speaker cabinet. Mode balanced cone for reduced break-up.

SB Acoustics
SATORI_MR13PNW-4

178.25 IT/piece
In stock
Speaker SB Acoustics Satori MR13PNW-4, impedance 4 ohm, 5 inch
4 ohm
Speaker SB Acoustics Satori MR13PNW-4, impedance 4 ohm, 5 inch

Vented aerodynamic cast aluminium chassis for optimum strength and low compression Proprietary cone material with EGYPTIAN PAPYRUS fibres made in-house Soft low damping rubber surround for optimum transient response Advanced BIMAX spider for improved linearity Powerful optimized low distortion neodymium motor system Non-conducting fibre glass voice coil former for minimum damping Extended copper sleeve on pole piece for low inductance and reduced distortion CCAW voice coil for reduced moving mass Long life silver lead wires attached 180° apart for improved stability Vented pole piece and coil former for reduced compression High piston to chassis diameter ratio Gasket and bolt hole protrusions for reduced coupling to speaker cabinet

Items 1 to 8 of 9 total

per page
Set Ascending Direction
Page:
  1. 1
  2. 2



This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x