Shop By
Price
  1.  
    26
    368
Rms
  1.  
    0 kg/s
    1 kg/s
Cms
  1.  
    930 µm/N
    2620 µm/N
Sd
  1.  
    50 cm²
    178 cm²
Manufacturer sensitivity
  1.  
    0.00 dB
    93.00 dB
Calculated sensitivity
  1.  
    84.24 dB
    92.50 dB
Re
  1.  
    0 ohm
    7 ohm
Qts
  1.  
    0
    560
Calculated efficiency
  1.  
    0.17 %
    1.12 %
Vas
  1.  
    0 L
    79 L
Vas * Qts²
  1.  
    0 L
    9 L
Xmax
  1.  
    0.00 mm
    11.00 mm
Calculated Xmax
  1.  
    6.17 mm
    8.80 mm
Qms
  1.  
    2200
    7900
Qes
  1.  
    0
    650
BL
  1.  
    0.00 T.m
    8.00 T.m
Mms
  1.  
    5 gr
    62 gr
Depth
  1.  
    73 mm
    102 mm
Nominal power handling
  1.  
    0 W
    80 W
EBP
  1.  
    70 Hz
    159 Hz
Fs
  1.  
    21 Hz
    64 Hz
Fs / Qts
  1.  
    76 Hz
    169 Hz
Le
  1.  
    0 mH
    2 mH
Weight
  1.  
    0.3 kg
    1.8 kg

Midwoofers

Items 17 to 24 of 52 total

per page
Set Descending Direction
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7


SB Acoustics
SB15CAC30-4

100.52 IT/piece
In stock
Speaker SB Acoustics SB15CAC30-4, impedance 4 ohm, 5 inch
4 ohm
Speaker SB Acoustics SB15CAC30-4, impedance 4 ohm, 5 inch

SB Acoustics
SB15SFCR-00

31.70 IT/piece
In stock
Speaker passif SB Acoustics SB15SFCR-00, 5 x 8 inch
Speaker passif SB Acoustics SB15SFCR-00, 5 x 8 inch

SB Acoustics
SATORI_MW13P-8

166.74 IT/piece
In stock
Speaker SB Acoustics Satori MW13P-8, impedance 8 ohm, 5 inch
8 ohm
Speaker SB Acoustics Satori MW13P-8, impedance 8 ohm, 5 inch

Vented aerodynamic cast aluminium chassis for optimum strength and low compression Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house Soft low damping rubber surround for optimum transient response Advanced BIMAX spider for improved linearity Powerful optimized low distortion neodymium motor system Non-conducting fibre glass voice coil former for minimum damping Extended copper sleeve on pole piece for low inductance and reduced distortion CCAW voice coil for reduced moving mass Long life silver lead wires attached 180° apart for improved stability Vented pole piece and coil former for reduced compression High piston to chassis diameter ratio Gasket and bolt hole protrusions for reduced coupling to speaker cabinet

SB Acoustics
SATORI_MW16PNW-4

177.07 IT/piece
In stock
Speaker SB Acoustics Satori MW16PNW-4, impedance 4 ohm, 6.5 inch
4 ohm
Speaker SB Acoustics Satori MW16PNW-4, impedance 4 ohm, 6.5 inch

Vented aerodynamic cast aluminium chassis for optimum strength and low compression Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house Soft low damping rubber surround for optimum transient response Advanced BIMAX spider for improved linearity Powerful optimized low distortion neodymium motor system Non-conducting fibre glass voice coil former for minimum damping Extended copper sleeve on pole piece for low inductance and reduced distortion CCAW voice coil for reduced moving mass Long life silver lead wires attached 180° apart for improved stability Vented pole piece and coil former for reduced compression High piston to chassis diameter ratio Gasket and bolt hole protrusions for reduced coupling to speaker cabinet

SB Acoustics
SB17CAC35-8

107.86 IT/piece
In stock
Speaker SB Acoustics SB17CAC35-8, impedance 8 ohm, 6 inch
8 ohm
Speaker SB Acoustics SB17CAC35-8, impedance 8 ohm, 6 inch

SB Acoustics
SATORI_MW19PNW-8

201.01 IT/piece
In stock
Speaker SB Acoustics Satori MW19PNW-8, impedance 8 ohm, 7.5 inch
8 ohm
Speaker SB Acoustics Satori MW19PNW-8, impedance 8 ohm, 7.5 inch

Vented aerodynamic cast aluminium chassis for optimum strength and low compression Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house Soft low damping rubber surround for optimum transient response Advanced BIMAX spider for improved linearity Powerful optimized low distortion neodymium motor system Non-conducting fibre glass voice coil former for minimum damping Extended copper sleeve on pole piece for low inductance and reduced distortion CCAW voice coil for reduced moving mass Long life silver lead wires attached 180° apart for improved stability Vented pole piece for reduced compression High piston to chassis diameter ratio Gasket and bolt hole protrusions for reduced coupling to speaker cabinet

SB Acoustics
SB17NBAC35-4

86.58 IT/piece
In stock
Speaker SB Acoustics SB17NBAC35-4, impedance 4 ohm, 6 inch
4 ohm
Speaker SB Acoustics SB17NBAC35-4, impedance 4 ohm, 6 inch

SB Acoustics
SB12NRXF25-4

59.47 IT/piece
In stock
Speaker SB Acoustics SB12NRXF25-4, impedance 4 ohm, 4 inch
4 ohm
Speaker SB Acoustics SB12NRXF25-4, impedance 4 ohm, 4 inch

Items 17 to 24 of 52 total

per page
Set Descending Direction
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7



This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x