Compression driver Sica CD90.38/405, 16 ohm, 1.0 inch throat
|
Sica |
CD90.38/405 |
CD90.38/405-16 |
Z009488C |
Compression driver |
|
|
Brand Sica |
Model CD90.38/405 |
TLHP code CD90.38/405-16 |
Manufacturer code Z009488C |
|
|
Product type Compression driver |
|
|||
Unavailable
-
Compression driver with 1.0-inch throat diameter and 1.5-inch voice coil, ferrite magnet circuit, usable from 2000 Hz.
General |
|
| Product type | Compression driver |
| Brand | Sica |
| Reference | CD90.38/405 |
| Product code | Z009488C |
Informations |
|
| Nominal impedance | 16 ohm |
| Dimensional category | 3.5 inch |
| Manufacturer sensitivity | 105.6 dB |
| Nominal power handling | 30 W |
| Max power handling | 60 W |
| Recommended min cutoff frequency | 2000 Hz |
| Exit dimension | 1.0 inch |
Fundamental parameters |
|
| Re | 12 ohm |
Small signal parameters |
|
| Fs | 1000 Hz |
Datas |
|
| Flux density | 1.64 T |
| Calculated Xmax | ±0.8333 mm |
| Weight | ~1 kg |
Dimensions |
|
| Voice coil diameter | 1.5 inch |
| Winding depth | 2.5 mm |
| Gap height | 2.5 mm |
| Outside diameter | 90 mm |
| Depth | 46.6 mm |
| Diamètre aimant (mm) | 90 mm |
| Driver dimensions mouting holes | 5.0 mm |
| Driver mounting system | 2 points on diameter 76 mm |
Shape & Materials |
|
| Front chape | Cylindrical |
| Magnet type | Ferrite |
| Winding material | Aluminium |
| Diaphragm former material | Kapton |
| Diaphragm material | Plastic |
Question about Sica CD90.38/405-16
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Sica CD90.38/405-16, Range, version, replacement...
Repair Sica CD90.38/405-16
Use Sica CD90.38/405-16
|
|
Informations Sica CD90.38/405-16
Compression driver with 1.0-inch throat diameter and 1.5-inch voice coil, ferrite magnet circuit, usable from 2000 Hz.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes Sica CD90.38/405-16
SPL vs Impedance measure
Dimensions
