Coaxial compression driver BMS 4594ND, 16+16 ohm, 1.4 inch exit
|
BMS |
4594ND |
4594-16+16 |
BMS-4594-16+16 |
Coaxial compression driver |
Sold by piece |
|
|
Brand BMS |
Model 4594ND |
TLHP code 4594-16+16 |
Manufacturer code BMS-4594-16+16 |
||
|
Product type Coaxial compression driver |
Sales packaging Sold by Piece |
|
|||
This product is in the process of supply to be in stock.
Reserved on order
Next TLHP reception estimated between Aug 1, 2024 and Aug 8, 2024
-
Extended Bandwidth (300 - 22000 Hz)
Neodymium Magnet Assembly
With two Subsystems in one, each Driver covers a smaller Frequency Range for increased Power Handling, high Dynamic and extremely low Distortion
Excellent Phase Coherence
Perfect Time Alignment without Problems of Multi-Source Interference
Ultra light Weight and small Size
In a conventional full range compression driver the phase plug must be located extremely close to the diaphragm, excursion of the diaphragm is limited and middle frequency performance is compromised. A typical large diaphragm dome compression driver has a limited high frequency response. Over 8 kHz the dome diaphragm breaks up causing resonance and harsh, metallic sound.
The patented design of the BMS 4594 is a result of extensive dedicated research and development providing matic improvement in dynamic response, clarity and ansparency. The BMS annular midrange diaphragm covers the frequency range between 300 and 7.000 Hz with a smooth, linear response. The large diaphragm excursion of max. +/-0,8 mm results in high output and increased power handling up to 1.300 W peak.
General |
|
| Product type | Coaxial compression driver |
| Brand | BMS |
| Reference | 4594ND |
| Product code | BMS-4594-16+16 |
Informations |
|
| Nominal impedance | 16+16 ohm |
| Dimensional category | 5 inch |
| Manufacturer sensitivity | 118 dB |
| Nominal power handling | 150 | 80 W |
| Max power handling | 300 | 160 W |
| Bandwidth | 300÷7000 | 6000÷22000 Hz |
| Recommended min cutoff frequency | 300 | 6300 Hz |
| Exit dimension | 1.4 inch |
Datas |
|
| Flux density | 1.95 | 2.2 T |
Dimensions |
|
| Voice coil diameter | 3.5 | 1.75 inch |
| Outside diameter | 132 mm |
| Depth | 94 mm |
| Driver dimensions mouting holes | 6.0 mm |
| Driver mounting system | 4 points on diameter 101.6 mm |
Shape & Materials |
|
| Magnet type | Neodymium |
| Winding material | CCAW (Copper-clad aluminium wire) |
| Diaphragm former material | Kapton |
| Diaphragm material | Polyester |
Question about BMS 4594-16+16
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
BMS 4594-16+16, Range, version, replacement...
From BMS
From others manufacturers
Repair BMS 4594-16+16
Use BMS 4594-16+16
|
|
With BMS 4594-16+16, customers has also bought
Informations BMS 4594-16+16
Neodymium Magnet Assembly
With two Subsystems in one, each Driver covers a smaller Frequency Range for increased Power Handling, high Dynamic and extremely low Distortion
Excellent Phase Coherence
Perfect Time Alignment without Problems of Multi-Source Interference
Ultra light Weight and small Size
In a conventional full range compression driver the phase plug must be located extremely close to the diaphragm, excursion of the diaphragm is limited and middle frequency performance is compromised. A typical large diaphragm dome compression driver has a limited high frequency response. Over 8 kHz the dome diaphragm breaks up causing resonance and harsh, metallic sound.
The patented design of the BMS 4594 is a result of extensive dedicated research and development providing matic improvement in dynamic response, clarity and ansparency. The BMS annular midrange diaphragm covers the frequency range between 300 and 7.000 Hz with a smooth, linear response. The large diaphragm excursion of max. +/-0,8 mm results in high output and increased power handling up to 1.300 W peak.
Name Coaxial compression driver BMS 4594ND, 16+16 ohm, 1.4 inch exit
SKU 4594-16+16
Price € 687.17 572.64 Out of stock
Buy Coaxial compression driver BMS 4594ND, 16+16 ohm, 1.4 inch exit
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Dimensions
Garantie
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.
