PHL Audio |
1120 |
1120-8 |
Cone driver |
Sold by piece |
|
Brand PHL Audio |
Model 1120 |
TLHP code 1120-8 |
||
Product type Cone driver |
Sales packaging Sold by Piece |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Next TLHP reception estimated between Jun 23, 2024 and Jun 30, 2024
High efficiency extended driver 6.5", impedance 8 ohm, direct radiation driver crossoverable, from 400 Hz (single) or 300 Hz (dual).
These drivers are the Studio Monitoring versions of models SP1060/1070. All the PHL AUDIO recipes for exceptional sound transcription have been integrated, resulting in full expressiveness in the so sensitive midrange band, against the sole counterpart of 1dB loss of sensitivity.
Their prefered frequency band extends from 400Hz to 4000 Hz (single unit) while the close coupling of a pair authorizes X-overing from 300Hz. The optimum acoustical load is situated under 3L volume, sealed or tuned around Fs.
General |
|
Product type | Cone driver |
Brand | PHL Audio |
Reference | 1120 |
Informations |
|
Product manufacturer range | Standard |
Nominal impedance | 8 ohm |
Dimensional category | 6.5 inch, 7.5 inch |
Frequency coverage type | Fullrange |
Manufacturer sensitivity | 94.5 dB |
Calculated sensitivity | 94.25 dB |
Nominal power handling | 130 W |
Max power handling | 260 W |
Bandwidth | 300÷5000 Hz |
Fundamental parameters |
|
Sd | 150 cm² |
Mms | 9.9 gr |
Cms | 140 µm/N |
Rms | 1.6 kg/s |
Le | 0.21 mH |
Re | 5.4 ohm |
BL | 8.5 T.m |
Small signal parameters |
|
Fs | 135 Hz |
Qes | 0.63 |
Qms | 5.25 |
Qts | 0.56 |
Vas | 4.45 L |
Datas |
|
Xmax | ±2 mm |
Calculated Xmax | ±4 mm |
Xvar, Xmech, Xlim | ±4 mm |
EBP | 214 Hz |
Zmin | 5.8 ohm |
Fs / Qts | 241 Hz |
Vas * Qts² | 1.4 L |
Efficiency | 1.71 % |
Calculated efficiency | 1.67 % |
Air volume occupied by the driver | 0.46 L |
Demodulation ring | Yes |
Dimensions |
|
Voice coil diameter | 1.5 inch |
Winding depth | 10 mm |
Gap height | 6 mm |
External dimensions | 162.5 | 187.5 mm |
Baffle cutout diameter | 146 mm |
Depth | 76.5 mm |
Front thickness | 8 mm |
Depth after front | 68.5 mm |
Diamètre aimant (mm) | 117.5 mm |
Shape & Materials |
|
Front chape | Non cylindrical |
Magnet type | Ferrite |
Basket masterial | Zamak |
Winding material | CCAR (Flat ribbon copper-clad aluminium wire) |
Voice coil former | Glass fiber |
Surround shape | Flat |
Surround material | Foam |
Dome material | Cloth |
Cone shape | Exponential |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.