Fullrange speaker Fostex FE206En, 8 ohm, 208 x 208 mm
|
Fostex |
FE206En |
FE206EN-8 |
Bicone driver |
|
|
Brand Fostex |
Model FE206En |
TLHP code FE206EN-8 |
|
|
Product type Bicone driver |
|
||
Unavailable
-
ES cone and center cap are adapted. This new diaphragm material has the fine, supple and high density fiber, and its characteristics successfully improve the mid-high frequency reproduction. ø146mm strong ferrite magnet is employed. Well tuned Qts / Mms values for ease of use in the back loaded horn enclosure.
It is possible to improve the high frequency definition adding one Fostex T90A or FT17H connected directly in parallel mode with the FE206En, with a high quality capacitor between 0.33 µF and 0.68 µF in serie on the + cable of the T90A or FT17H.
General |
|
| Product type | Bicone driver |
| Brand | Fostex |
| Reference | FE206En |
Informations |
|
| Nominal impedance | 8 ohm |
| Dimensional category | 8.5 inch |
| Frequency coverage type | Fullrange |
| Manufacturer sensitivity | 96 dB |
| Calculated sensitivity | 97.08 dB |
| Nominal power handling | 30 W |
| Bandwidth | 45÷20000 Hz |
Fundamental parameters |
|
| Mms | 12.2 gr |
| Le | 0.0525 mH |
| Re | 6.8 ohm |
Small signal parameters |
|
| Fs | 45 Hz |
| Qes | 0.194 |
| Qms | 4.57 |
| Qts | 0.19 |
| Vas | 70.99 L |
Datas |
|
| Xmax | ±0.8 mm |
| EBP | 232 Hz |
| Fs / Qts | 237 Hz |
| Vas * Qts² | 2.57 L |
| Efficiency | 2.68 % |
| Calculated efficiency | 3.21 % |
| Weight | ~3.6 kg |
Dimensions |
|
| Voice coil diameter | 1.4 inch |
| External dimensions | 208 | 208 mm |
| Baffle cutout diameter | 182 mm |
| Front thickness | 4.5 mm |
| Depth after front | 85 mm |
| Diamètre aimant (mm) | 145 mm |
Shape & Materials |
|
| Front chape | Non cylindrical |
| Magnet type | Ferrite |
Question about Fostex FE206EN-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Fostex FE206EN-8, Range, version, replacement...
Informations Fostex FE206EN-8
ES cone and center cap are adapted. This new diaphragm material has the fine, supple and high density fiber, and its characteristics successfully improve the mid-high frequency reproduction. ø146mm strong ferrite magnet is employed. Well tuned Qts / Mms values for ease of use in the back loaded horn enclosure.
It is possible to improve the high frequency definition adding one Fostex T90A or FT17H connected directly in parallel mode with the FE206En, with a high quality capacitor between 0.33 µF and 0.68 µF in serie on the + cable of the T90A or FT17H.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
It is possible to improve the high frequency definition adding one Fostex T90A or FT17H connected directly in parallel mode with the FE206En, with a high quality capacitor between 0.33 µF and 0.68 µF in serie on the + cable of the T90A or FT17H.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes Fostex FE206EN-8
SPL vs Impedance measure
Dimensions
