Shop By
Price
  1. 0
    3015
Cut-off frequency
  1. 300 Hz
    2000 Hz

Horn

High-frequency horn, brand RCF, B&C Speakers, Faital Pro, Eminence, 18 Sound, Beyma, Celestion, BMS... in aluminium, in fiber, for 1 inch driver, 1.4 driver, 2 inches driver.


Items 1 to 15 of 136 total

per page
Set Descending Direction
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10


RCF H100

24.66 IT/piece
In stock
Horn RCF H100, 8.66 x 8.66 inch, 1-inch throat
13125015
13125015

RCF HF101

29.23 IT/piece
In stock
Horn RCF HF101 (90x70°), 7.07 x 7.07 inch, 1-inch throat

1-inch Throat Adaptor.90° x 70° Constant Directivity Coverage. Loading down to 1000 Hz.Aluminum Body.Perfectly Controlled Dispertion.

Post a comment / review

13125015
13133048
13125015
13133048

RCF H6000

119.00 IT/piece
In stock
Horn RCF H6000 for MR8N301

Large 8 inch horn for RCF MR8N301. Screws not provided.

Post a comment / review

13125015
13133048
13133052
13125015
13133048
13133052

Beyma TD-TPL

48.86 IT/piece
In stock
Horn for Beyma TPL150

Horn part for Beyma TPL150 AMT driver.

13125015
13133048
13133052
13125015
13133048
13133052

Beyma TD164

43.67 IT/piece
In stock
Horn Beyma TD164, 1.0-inch throat, front 7.95 x 7.95 inch

This horn has been designed to work especifically with 1 inch compression drivers, providing uniform on and off-axis response. The constant directivity characteristics of this model ensure the ability to cover 60º width horizontally and 40º width vertically, at virtually any frequency within its operational range. To ensure freedom of resonance, this horn is constructed of cast aluminium, with flat front finish to facilitate flush mounting. Its square shape allows to easily rotate the horn without any need for modification in the cabinet.

Post a comment / review

13125015
13133048
13133052
1TD164
13125015
13133048
13133052
1TD164

Beyma TD194

44.60 IT/piece
In stock
Horn Beyma TD194, 1.0-inch throat, front 7.95 x 7.95 inch

This horn has been designed to work especifically with 1 inch compression drivers, providing uniform on and off-axis response. The constant directivity characteristics of this model ensure the ability to cover 90º width horizontally and 40º width vertically, at virtually any frequency within its operational range. To ensure freedom of resonance, this horn is constructed of cast aluminium, with flat front finish to facilitate flush mounting. Its square shape allows to easily rotate the horn without any need for modification in the cabinet.

Post a comment / review

13125015
13133048
13133052
1TD164
1TD194
13125015
13133048
13133052
1TD164
1TD194

Beyma TD460N

142.74 IT/piece
In stock
Horn Beyma TD460/N, 2.0-inch throat, front 16.54 x 10.55 inch TD460/N

Designed for compression drivers with 2" mouth diameter. It provides uniform response, on and off-axis with a neutral and natural frequency reproduction

Post a comment / review

13125015
13133048
13133052
1TD164
1TD194
1TD460NR
13125015
13133048
13133052
1TD164
1TD194
1TD460NR

Beyma TD400N

132.35 IT/piece
In stock
Horn Beyma TD400N, 2.0 inch throat diameter TD400/N

Designed for compression drivers with 2" mouth diameter It provides uniform response, on and offaxis with a neutral and natural frequency reproduction Coverage angles of 90º in the horizontal plane and 40º in the vertical plane Straightforward mounting thanks to its plane mouth finish

Post a comment / review

13125015
13133048
13133052
1TD164
1TD194
1TD460NR
13125015
13133048
13133052
1TD164
1TD194
1TD460NR

Beyma TD385

53.93 IT/piece
In stock
Horn Beyma TD385, 1.0-inch throat, front 9.25 x 9.25 inch

Designed for compression drivers with 1.4 inch throat diameter It provides uniform response, on and off-axis with a neutral and natural frequency reproduction Coverage angles of 80º in the horizontal plane and 50º in the vertical plane Precise directivity control in the pass band Its square form provides more versatility to mount it in the box

Post a comment / review

13125015
13133048
13133052
1TD164
1TD194
1TD460NR
1TD385
13125015
13133048
13133052
1TD164
1TD194
1TD460NR
1TD385

Beyma TD365

58.69 IT/piece
In stock
Horn Beyma TD365, 1.4-inch throat, front 9.06 x 9.06 inch

This 1.4 inch entry horn is designed to provide uniform on and off-axis response. The constant directivity characteristics of this model ensure the ability to cover 60º wide horizontally and 50º wide vertically, at virtually any frequency within its operational range. To ensure freedom of resonance, this flare is constructed of cast aluminium, with flat front finish to facilitate flush mounting.

Post a comment / review

13125015
13133048
13133052
1TD164
1TD194
1TD460NR
1TD385
1TD365
13125015
13133048
13133052
1TD164
1TD194
1TD460NR
1TD385
1TD365

Beyma TDWL4

69.87 IT/piece
In stock
Horn Beyma TD WL-4, front 8.27 x 10.2 inch, for two WL4 / WL4Fe TD WL-4

Designed to be used with two WL-4 wave guides It provides uniform response, on and off-axis with a neutral and natural frequency reproduction Coverage angles of 90º in the horizontal plane and 20º in the vertical plane Precise directivity control in the pass band Cast aluminium construction

Post a comment / review

13125015
13133048
13133052
1TD164
1TD194
1TD460NR
1TD385
1TD365
1TDWL4
13125015
13133048
13133052
1TD164
1TD194
1TD460NR
1TD385
1TD365
1TDWL4

Eighteen Sound XR2064

79.71 IT/piece
In stock
Horn 18 Sound XR2064, 2.0 inch throat diameter

The HD2080T 2-inch exit high frequency compression driver has been designed for use in high quality installed audio systems, where weight is not the key issue. The motor structure, throughout the precisely coherent phase plug with 3 circumferential slots and copper ring on the pole piece, reduces inductance effects and distortion. Four top plate air ducts have been designed to act as a loading chamber for the diaphragm, implementing mid band distortion and response figures. The HD2080T diaphragm assembly is composed of a titanium dome sandwiched to a proprietary treated polyester suspension unit. It has been designed to maintain low resonance, lowering the minimum crossover point value at 1,2kHz. Thanks to its physical properties, the proprietary treated Nomex former has a 30% higher value of tensile elongation at a working operative temperature (200°C) when compared to Kapton. This feature enables proper energy transfer control from the voice coil to the dome in real working conditions. Moreover, this proprietary former material is also suitable to for use in higher moisture content environments. The HD2080T powerful ceramic magnet assembly has been designed to obtain 16KGauss in the gap. Excellent heat dissipation and thermal exchange are guaranteed by the direct contact between the magnetic structure and the aluminum cover which leads to a lower power compression value.

Post a comment / review

13125015
13133048
13133052
1TD164
1TD194
1TD460NR
1TD385
1TD365
1TDWL4
422064000
13125015
13133048
13133052
1TD164
1TD194
1TD460NR
1TD385
1TD365
1TDWL4
422064000

Eighteen Sound XR1496C

61.88 IT/piece
In stock
Horn 18 Sound XR1496C, 1.4 inch throat diameter, composite material
13125015
13133048
13133052
1TD164
1TD194
1TD460NR
1TD385
1TD365
1TDWL4
422064000
421496000
13125015
13133048
13133052
1TD164
1TD194
1TD460NR
1TD385
1TD365
1TDWL4
422064000
421496000

Eighteen Sound XR1064

51.00 IT/piece
In stock
Horn 18 Sound XR1064, 1.0 inch throat diameter, aluminium

The XR1064 is a constant directivity horn with a throat entry of 1 inch. The XR1064 has been developed to reach the optimum performance when it will coupled with one inch exit Eighteen Sound high frequency compression drivers. All XR horn series have been designed in order to reach smooth driver frequency response, while maintaining constant coverage and directivity and eliminating the midrange narrowing and high frequency beaming problems common of many similar horns on the market. XR series horns are made in low pressure injected aluminum material in order to obtain the best performance under many point of view: - thermal: aluminum horns are capable to reduce up to 30°C the steady state compression driver working temperature at full power, when compared to equivalent size plastic horn. This gives lower power compression ratio (down to 1 dB) and higher driver power handling (up to 30% higher); - mechanical: no need for compression driver support (like brackets), and at the same time eliminate the problem of horn resonance with optimum waterfall and impulse system behavior. The XR1064 shows nominal 60° Horizontal x 40° Vertical pattern control, providing consistent on-axis and off-axis frequency response from 1.6kHz to 16kHz in both horizontal and vertical planes. Horn directivity is constant down to 1.6kHz.

Post a comment / review

13125015
13133048
13133052
1TD164
1TD194
1TD460NR
1TD385
1TD365
1TDWL4
422064000
421496000
421064000
13125015
13133048
13133052
1TD164
1TD194
1TD460NR
1TD385
1TD365
1TDWL4
422064000
421496000
421064000

Sica D140

10.10 IT/piece
In stock
Horn Sica D140, diamander 5.51 inch, For Sica CD83.26 and CD78.26
13125015
13133048
13133052
1TD164
1TD194
1TD460NR
1TD385
1TD365
1TDWL4
422064000
421496000
421064000
Q07030A
13125015
13133048
13133052
1TD164
1TD194
1TD460NR
1TD385
1TD365
1TDWL4
422064000
421496000
421064000
Q07030A

Items 1 to 15 of 136 total

per page
Set Descending Direction
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10


En poursuivant votre navigation sur ce site, vous acceptez l’utilisation de Cookies ou autres traceurs pour réaliser des statistiques de visites. En savoir plus
En poursuivant votre navigation sur ce site, vous acceptez l’utilisation de Cookies ou autres traceurs pour réaliser des statistiques de visites. En savoir plus