Coaxial speaker Oberton 12CX, 8+16 ohm, 12 inch
|
Oberton |
12CX |
12CX-8+16 |
12112F0108 |
Coaxial driver with two entries |
Sold by piece |
|
|
Brand Oberton |
Model 12CX |
TLHP code 12CX-8+16 |
Manufacturer code 12112F0108 |
||
|
Product type Coaxial driver with two entries |
Sales packaging Sold by Piece |
|
|||
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 15 weeks
learn more
-
The 12CX is a 12" / 1.4" coaxial transducer designed for use in compact reflex enclosures and stage monitors with a nominal dispersion of 80 degrees.
The low profile, smooth curvilinear LF cone provides smooth response within its intended frequency range and water prove protective coating, allowing application in a wide range of environments. The state-of-the-art 77 mm (3 in) LF voice coil has Kapton former, which together with high temperature resistant resin ensure high reliability by high power. A triple aluminium demodulating rings on the magnet structure reduce distortion and inductance and improve transient response.
The HF driver diaphragm assembly, using triple layer polyester dome this together with phasing plug improve linearity of frequency response in high end.
The HF magnet structure has cooper ring on the pole piece, which reduces the inductance figure of frequencies above 10 kHz, improving phase and impedance linearisation. This ensures extremely high SPL in the high end of the frequency response.
Application: Stage monitors and compact bass reflex boxes.
KEY FEATURES :
98 db SPL 1W / 1m ( LF ) average sensitivity
77 mm ( 3") high temperature voice coil ( LF )
700 W AES program power ( LF )
Triple aluminium demodulating rings
Single magnet assembly
Double silicone spider
Water protected cone
1.4" exit HF compression driver
72 mm (2.85") HF high temperature voice coil
80 degrees nominal dispersion
General |
|
| Product type | Coaxial driver with two entries |
| Brand | Oberton |
| Reference | 12CX |
| Product code | 12112F0108 |
Informations |
|
| Nominal impedance | 8+16 ohm |
| Dimensional category | 12.5 inch |
| Manufacturer sensitivity | 98 dB |
| Calculated sensitivity | 95.17 dB |
| Nominal power handling | 350 | 75 W |
| Bandwidth | 60÷16000 Hz |
| Exit dimension | 1.4 inch |
Fundamental parameters |
|
| Mms | 60.97 gr |
| Le | 0.6 mH |
| Re | 5.65 ohm |
Small signal parameters |
|
| Fs | 51.24 Hz |
| Qes | 0.366 |
| Qms | 6.35 |
| Qts | 0.346 |
| Vas | 58.55 L |
Datas |
|
| Xmax | ±5.25 mm |
| EBP | 140 Hz |
| Fs / Qts | 148 Hz |
| Vas * Qts² | 7.01 L |
| Calculated efficiency | 2.07 % |
| Weight | ~10.8 kg |
| Dispersion | 80° x 80° |
Dimensions |
|
| Voice coil diameter | 3 | 2.8 inch |
| Outside diameter | 315 mm |
| Baffle cutout diameter | 280 mm |
| Front thickness | 15.7 mm |
| Depth after front | 180 mm |
| Diamètre aimant (mm) | 220 mm |
Shape & Materials |
|
| Front chape | Cylindrical |
| Magnet type | Ferrite |
Question about Oberton 12CX-8+16
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Informations Oberton 12CX-8+16
The low profile, smooth curvilinear LF cone provides smooth response within its intended frequency range and water prove protective coating, allowing application in a wide range of environments. The state-of-the-art 77 mm (3 in) LF voice coil has Kapton former, which together with high temperature resistant resin ensure high reliability by high power. A triple aluminium demodulating rings on the magnet structure reduce distortion and inductance and improve transient response.
The HF driver diaphragm assembly, using triple layer polyester dome this together with phasing plug improve linearity of frequency response in high end.
The HF magnet structure has cooper ring on the pole piece, which reduces the inductance figure of frequencies above 10 kHz, improving phase and impedance linearisation. This ensures extremely high SPL in the high end of the frequency response.
Application: Stage monitors and compact bass reflex boxes.
KEY FEATURES :
98 db SPL 1W / 1m ( LF ) average sensitivity
77 mm ( 3") high temperature voice coil ( LF )
700 W AES program power ( LF )
Triple aluminium demodulating rings
Single magnet assembly
Double silicone spider
Water protected cone
1.4" exit HF compression driver
72 mm (2.85") HF high temperature voice coil
80 degrees nominal dispersion
Name Coaxial speaker Oberton 12CX, 8+16 ohm, 12 inch
SKU 12CX-8+16
Price € 362.17 301.81
Availability In stock
Buy Coaxial speaker Oberton 12CX, 8+16 ohm, 12 inch
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes Oberton 12CX-8+16
SPL vs Impedance measure
Dimensions
Garantie
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.
