Coaxial speaker Oberton 6NCX, 8+16 ohm, 6.5 inch
|
Oberton |
6NCX |
6NCX-8+16 |
12106N0108 |
Coaxial driver with two entries |
Sold by piece |
|
|
Brand Oberton |
Model 6NCX |
TLHP code 6NCX-8+16 |
Manufacturer code 12106N0108 |
||
|
Product type Coaxial driver with two entries |
Sales packaging Sold by Piece |
|
|||
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 15 weeks
learn more
-
The 6NCX is a 6.5" / 1" coaxial transducer designed for use in compact reflex enclosures with a nominal dispersion of 80 degrees.
The low profile, smooth curvilinear LF cone provides smooth response within its intended frequency range and water prove protective coating, allowing application in a wide range of environments. The state-of-the-art 44 mm (1.75 in) LF voice coil has Kapton former, which together with high temperature resistant resin ensure high reliability by high power. A double aluminium demodulating rings reduce distortion and inductance and improve transient response. The neodymium 1" exit compression driver adopted is our ND2539 model. The HF driver diaphragm assembly, using triple layer polyester dome this together with phasing plug improve linearity of frequency response in high end. Because of design with single magnet assembly the speaker has very light weight and compact size.
Application: Compact fullrange boxes.
KEY FEATURES :
92 db SPL 1W / 1m ( LF ) average sensitivity
44 mm ( 1.75") high temperature voice coil ( LF )
300 W AES program power ( LF )
Double aluminium demodulating rings
Single neodymium magnet assembly
Water protected cone
1" exit HF neodymium compression driver
38 mm (1.5") HF high temperature voice coil
80 degrees nominal dispersion
Very light weight
General |
|
| Product type | Coaxial driver with two entries |
| Brand | Oberton |
| Reference | 6NCX |
| Product code | 12106N0108 |
Informations |
|
| Nominal impedance | 8+16 ohm |
| Dimensional category | 6.5 inch, 7.5 inch |
| Manufacturer sensitivity | 92 dB |
| Calculated sensitivity | 90.3 dB |
| Nominal power handling | 150 | 30 W |
| Bandwidth | 80÷18000 Hz |
| Exit dimension | 1.0 inch |
Fundamental parameters |
|
| Mms | 16.6 gr |
| Le | 0.52 mH |
| Re | 5.27 ohm |
Small signal parameters |
|
| Fs | 91.5 Hz |
| Qes | 0.476 |
| Qms | 4.94 |
| Qts | 0.435 |
| Vas | 4.35 L |
Datas |
|
| Xmax | ±5.75 mm |
| EBP | 192 Hz |
| Fs / Qts | 210 Hz |
| Vas * Qts² | 0.83 L |
| Calculated efficiency | 0.68 % |
| Weight | ~1.4 kg |
| Dispersion | 80° x 80° |
Dimensions |
|
| Voice coil diameter | 1.75 | 1.75 inch |
| External dimensions | 171 | 185 mm |
| Baffle cutout diameter | 145 mm |
| Front thickness | 10 mm |
| Depth after front | 88.2 mm |
| Diamètre aimant (mm) | 99 mm |
Shape & Materials |
|
| Front chape | Non cylindrical |
| Magnet type | Neodymium |
1 question replied about Oberton 6NCX-8+16
-
Hans on 12/29/21
Do you sell the old (silver) or new (black) version of the driver? The information on your page fit to the old version, but the article number also fits to the new black one, listed at oberton. Response: This is the silver frame.
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Informations Oberton 6NCX-8+16
The low profile, smooth curvilinear LF cone provides smooth response within its intended frequency range and water prove protective coating, allowing application in a wide range of environments. The state-of-the-art 44 mm (1.75 in) LF voice coil has Kapton former, which together with high temperature resistant resin ensure high reliability by high power. A double aluminium demodulating rings reduce distortion and inductance and improve transient response. The neodymium 1" exit compression driver adopted is our ND2539 model. The HF driver diaphragm assembly, using triple layer polyester dome this together with phasing plug improve linearity of frequency response in high end. Because of design with single magnet assembly the speaker has very light weight and compact size.
Application: Compact fullrange boxes.
KEY FEATURES :
92 db SPL 1W / 1m ( LF ) average sensitivity
44 mm ( 1.75") high temperature voice coil ( LF )
300 W AES program power ( LF )
Double aluminium demodulating rings
Single neodymium magnet assembly
Water protected cone
1" exit HF neodymium compression driver
38 mm (1.5") HF high temperature voice coil
80 degrees nominal dispersion
Very light weight
Name Coaxial speaker Oberton 6NCX, 8+16 ohm, 6.5 inch
SKU 6NCX-8+16
Price € 227.74 189.78
Availability In stock
Buy Coaxial speaker Oberton 6NCX, 8+16 ohm, 6.5 inch
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes Oberton 6NCX-8+16
SPL vs Impedance measure
Dimensions
Garantie
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.
