Coaxial speaker RCF CX10N251, 8+8 ohm, 10.24 inch

Brand 
RCF
Model 
CX10N251
SKU 
CX10N251-8+8
Manufacturer code 
111000251
Product type 
Coaxial driver with two entries
Brand
RCF
Model
CX10N251
TLHP code
CX10N251-8+8
Manufacturer code
111000251
Product type 
Coaxial driver with two entries

Unavailable

  • 600 Watt continuous program power handling Mid-Bass
    2.5-inch , fibreglass outside, aluminum voice coil
    99 dB Sensitivity
    65 Hz - 3.5 kHz Frequency range
    Dual-forced air ventilation for minimum power compression
    M -roll surround and exponential cone geometry
    Demodulation ring
    100 Watt Continuous program power handling HF
    1.75-inch Diaphragm, 1.0-inch Exit Throat
    Frequency range: 1200Hz – 20kHz
    2-slot, optimised geometry phase plug
    Polyester diaphragm
    Aluminum rear cover dissipation design

    The CX10N251 is a lightweight coaxial driver with excellent linearity and high efficiency.

    The CX10N251 radiates a coherent single spherical wave front with perfect dispersion control.
    The design is powered from a large sized single neodymium ring magnet that provides an extremely high flux density and BL factor.
    The new hyper-vented aluminium basket and magnetic assembly design provide an excellent heat dissipation and lower power compression.
    Special air-forced ventilations are provided for voice coil, magnet assembly and basket.
    A 2,5" voice coil combined a strength fibreglass former and aluminium wire drives the mid-bass cone with high efficiency and a good extension.
    The 1,7" dome compression driver, loaded to a 80° conical waveguide, provides a clear vocal output and a perfect high frequency extension.

    Applications :The CX10N251 is the perfect lightweight solution for vocal applications, stage monitoring and compact 2-way reflex enclosures.
    Ideal in designs where a constant radial directivity pattern is a requirement.

General

Product type Coaxial driver with two entries
Brand RCF
Reference CX10N251
Product code 111000251

Informations

Nominal impedance 8+8 ohm
Dimensional category 10.5 inch
Manufacturer sensitivity 99 | 109 dB
Calculated sensitivity 97.57 dB
Nominal power handling 300 | 50 W
Bandwidth 65÷3500 | 1200÷20000 Hz
Exit dimension 1.0 inch

Fundamental parameters

Sd 400 cm²
Mms 28 gr
Le 1.2 mH
Re 5.2 ohm
BL 17.5 T.m

Small signal parameters

Fs 72 Hz
Qes 0.25
Qms 4.5
Qts 0.23
Vas 25 L

Datas

Flux density N°2 1.9
Xmax ±5 mm
EBP 288 Hz
Zmin 6.4 ohm
Zmin N°2 6.5 ohm
Fs / Qts 313 Hz
Vas * Qts² 1.33 L
Efficiency 4.7 %
Calculated efficiency 3.59 %
Demodulation ring Yes
Dispersion 60° x 60°
Horn technology Added horn

Dimensions

Voice coil diameter 2.5 | 1.75 inch
Gap height 8 mm
Outside diameter 260 mm
Baffle cutout diameter 229.5 mm
Front thickness 9.5 mm
Depth after front 126 mm
Diamètre aimant (mm) 115 mm

Shape & Materials

Front chape Cylindrical
Magnet type Neodymium
Basket masterial Aluminium
Winding material Aluminium
Voice coil former Glass fiber
Surround material Cloth
Winding material Aluminium
Diaphragm material Polyimide
Horn material Polyurethane


Question about RCF CX10N251-8+8

Ask a new question!

This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.


With RCF CX10N251-8+8, customers has also bought

Informations RCF CX10N251-8+8

600 Watt continuous program power handling Mid-Bass
2.5-inch , fibreglass outside, aluminum voice coil
99 dB Sensitivity
65 Hz - 3.5 kHz Frequency range
Dual-forced air ventilation for minimum power compression
M -roll surround and exponential cone geometry
Demodulation ring
100 Watt Continuous program power handling HF
1.75-inch Diaphragm, 1.0-inch Exit Throat
Frequency range: 1200Hz – 20kHz
2-slot, optimised geometry phase plug
Polyester diaphragm
Aluminum rear cover dissipation design

The CX10N251 is a lightweight coaxial driver with excellent linearity and high efficiency.

The CX10N251 radiates a coherent single spherical wave front with perfect dispersion control.
The design is powered from a large sized single neodymium ring magnet that provides an extremely high flux density and BL factor.
The new hyper-vented aluminium basket and magnetic assembly design provide an excellent heat dissipation and lower power compression.
Special air-forced ventilations are provided for voice coil, magnet assembly and basket.
A 2,5" voice coil combined a strength fibreglass former and aluminium wire drives the mid-bass cone with high efficiency and a good extension.
The 1,7" dome compression driver, loaded to a 80° conical waveguide, provides a clear vocal output and a perfect high frequency extension.

Applications :The CX10N251 is the perfect lightweight solution for vocal applications, stage monitoring and compact 2-way reflex enclosures.
Ideal in designs where a constant radial directivity pattern is a requirement.

All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x