Shop By
Price
  1. 11
    373
Qes
  1. 0.00
    2.45
Fs
  1. 8 Hz
    1300 Hz
Qms
  1. 0
    13
BL
  1. 1.3 T.m
    21.4 T.m
EBP
  1. 1
    985
Qts
  1. 0.21
    1.28
Vas
  1. 0 L
    462 L
Xmax
  1. 0.2 mm
    17.7 mm
Mms
  1. 0 gr
    665 gr
Nominal power handling
  1. 5 W
    300 W
Sensitivity
  1. 75.0 dB
    96.5 dB
Weight
  1. 0 kg
    11 kg

Currently Shopping by
Brand
SB Acoustics (x)

Speakers

TLHP is the biggest supplier in the European Union of loudspeakers, here you can find the largest catalog to reply to all the projects (Hi-Fi, Pro Audio, Public-Address, Studio, Monitoring, Home Theathre...) All the best speaker manufacturers are here and want to be here. We are professionnal, we know the products, we use the products, for you and for passion.


Items 1 to 15 of 179 total

per page
Set Descending Direction
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10


SB Acoustics SB42FHCL75-6

Unavailable
Speaker SB Acoustics SB42FHCL75-6, impedance 6 ohm, 15 inch

SB Acoustics AT60NC-4


Tweeter AMT SB Acoustics AT60NC-4, 4 ohm

SB Acoustics MD60N-6

Supplied on order
Mid dome SB Acoustics 2.5'' MD60N-6, impedance 6 ohm, 2.5 inch

Coated non-resonant soft dome Powerful neodymium motor system Tuned closed-end transmission line chamber Dynamic dome stabilizer and flow resistor Machined aluminium faceplate Vented coil former Braided long-life silver litz wires

Post a comment / review

SB Acoustics SATORI_MR13P-4

Supplied on order
Speaker SB Acoustics Satori MR13P-4, impedance 4 ohm, 5 inch

Vented aerodynamic cast aluminium chassis for optimum strength and low compression. Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house. Soft low damping rubber surround for optimum transient response. Advanced BIMAX spider for improved linearity. Powerful optimized low distortion neodymium motor system. Non-conducting fibre glass voice coil former for minimum damping. Extended copper sleeve on pole piece for low inductance and reduced distortion. CCAW voice coil for reduced moving mass. Long life silver lead wires attached 180° apart for improved stability. Vented pole piece and coil former for reduced compression. High piston to chassis diameter ratio. Gasket and bolt hole protrusions for reduced coupling to speaker cabinet.

Post a comment / review

SB Acoustics SATORI_MR13P-8

Supplied on order
Speaker SB Acoustics Satori MR13P-8, impedance 8 ohm, 5 inch

Vented aerodynamic cast aluminium chassis for optimum strength and low compression. Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house. Soft low damping rubber surround for optimum transient response. Advanced BIMAX spider for improved linearity. Powerful optimized low distortion neodymium motor system. Non-conducting fibre glass voice coil former for minimum damping. Extended copper sleeve on pole piece for low inductance and reduced distortion. CCAW voice coil for reduced moving mass. Long life silver lead wires attached 180° apart for improved stability. Vented pole piece and coil former for reduced compression. High piston to chassis diameter ratio. Gasket and bolt hole protrusions for reduced coupling to speaker cabinet.

Post a comment / review

SB Acoustics SATORI_MR13PNW-4

Supplied on order
Speaker SB Acoustics Satori MR13PNW-4, impedance 4 ohm, 5 inch

Vented aerodynamic cast aluminium chassis for optimum strength and low compression Proprietary cone material with EGYPTIAN PAPYRUS fibres made in-house Soft low damping rubber surround for optimum transient response Advanced BIMAX spider for improved linearity Powerful optimized low distortion neodymium motor system Non-conducting fibre glass voice coil former for minimum damping Extended copper sleeve on pole piece for low inductance and reduced distortion CCAW voice coil for reduced moving mass Long life silver lead wires attached 180° apart for improved stability Vented pole piece and coil former for reduced compression High piston to chassis diameter ratio Gasket and bolt hole protrusions for reduced coupling to speaker cabinet

Post a comment / review

SB Acoustics SATORI_MR13PNW-8

Supplied on order
Speaker SB Acoustics Satori MR13PNW-8, impedance 8 ohm, 5 inch

Vented aerodynamic cast aluminium chassis for optimum strength and low compression. Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house. Soft low damping rubber surround for optimum transient response. Advanced BIMAX spider for improved linearity. Powerful optimized low distortion neodymium motor system. Non-conducting fibre glass voice coil former for minimum damping. Extended copper sleeve on pole piece for low inductance and reduced distortion. CCAW voice coil for reduced moving mass. Long life silver lead wires attached 180° apart for improved stability. Vented pole piece and coil former for reduced compression. High piston to chassis diameter ratio. Gasket and bolt hole protrusions for reduced coupling to speaker cabinet.

Post a comment / review

SB Acoustics SATORI_MR16P-4

Supplied on order
Speaker SB Acoustics Satori MR16P-4, impedance 4 ohm, 6.5 inch

Vented aerodynamic cast aluminium chassis for optimum strength and low compression. Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house. Soft low damping rubber surround for optimum transient response. Advanced BIMAX spider for improved linearity. Powerful optimized low distortion neodymium motor system. Non-conducting fibre glass voice coil former for minimum damping. Extended copper sleeve on pole piece for low inductance and reduced distortion. CCAW voice coil for reduced moving mass. Long life silver lead wires attached 180° apart for improved stability. Vented pole piece and coil former for reduced compression. High piston to chassis diameter ratio. Gasket and bolt hole protrusions for reduced coupling to speaker cabinet. Mode balanced cone for reduced break-up.

Post a comment / review

SB Acoustics SATORI_MR16P-8

Supplied on order
Speaker SB Acoustics Satori MR16P-8, impedance 8 ohm, 6.5 inch

Vented aerodynamic cast aluminium chassis for optimum strength and low compression Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house Soft low damping rubber surround for optimum transient response Advanced BIMAX spider for improved linearity Powerful optimized low distortion neodymium motor system Non-conducting fibre glass voice coil former for minimum damping Extended copper sleeve on pole piece for low inductance and reduced distortion CCAW voice coil for reduced moving mass Long life silver lead wires attached 180° apart for improved stability Vented pole piece and coil former for reduced compression High piston to chassis diameter ratio Gasket and bolt hole protrusions for reduced coupling to speaker cabinet Mode balanced cone to reduced break-up

Post a comment / review

SB Acoustics SATORI_MR16PNW-4

Supplied on order
Speaker SB Acoustics Satori MR16PNW-4, impedance 4 ohm, 6.5 inch

Vented aerodynamic cast aluminium chassis for optimum strength and low compression Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house Soft low damping rubber surround for optimum transient response Advanced BIMAX spider for improved linearity Powerful optimized low distortion neodymium motor system Non-conducting fibre glass voice coil former for minimum damping Extended copper sleeve on pole piece for low inductance and reduced distortion CCAW voice coil for reduced moving mass Long life silver lead wires attached 180° apart for improved stability Vented pole piece and coil former for reduced compression High piston to chassis diameter ratio Gasket and bolt hole protrusions for reduced coupling to speaker cabinet Mode balanced cone for reduced break-up

Post a comment / review

SB Acoustics SATORI_MR16PNW-8

Supplied on order
Speaker SB Acoustics Satori MR16PNW-8, impedance 8 ohm, 6.5 inch

Vented aerodynamic cast aluminium chassis for optimum strength and low compression. Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house. Soft low damping rubber surround for optimum transient response. Advanced BIMAX spider for improved linearity. Powerful optimized low distortion neodymium motor system. Non-conducting fibre glass voice coil former for minimum damping. Extended copper sleeve on pole piece for low inductance and reduced distortion. CCAW voice coil for reduced moving mass. Long life silver lead wires attached 180° apart for improved stability. Vented pole piece and coil former for reduced compression. High piston to chassis diameter ratio. Gasket and bolt hole protrusions for reduced coupling to speaker cabinet. Mode balanced cone for reduced break-up.

Post a comment / review

SB Acoustics SATORI_MT19CP-4


Speaker SB Acoustics Satori MT19CP-4 , impedance 4 ohm, 7.5 inch

SB Acoustics SATORI_MW13P-4

Supplied on order
Speaker SB Acoustics Satori MW13P-4, impedance 4 ohm, 5 inch

Vented aerodynamic cast aluminium chassis for optimum strength and low compression Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house Soft low damping rubber surround for optimum transient response Advanced BIMAX spider for improved linearity Powerful optimized low distortion neodymium motor system Non-conducting fibre glass voice coil former for minimum damping Extended copper sleeve on pole piece for low inductance and reduced distortion CCAW voice coil for reduced moving mass Long life silver lead wires attached 180° apart for improved stability Vented pole piece and coil former for reduced compression High piston to chassis diameter ratio Gasket and bolt hole protrusions for reduced coupling to speaker cabinet

Post a comment / review

SB Acoustics SATORI_MW13P-8

Supplied on order
Speaker SB Acoustics Satori MW13P-8, impedance 8 ohm, 5 inch

Vented aerodynamic cast aluminium chassis for optimum strength and low compression Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house Soft low damping rubber surround for optimum transient response Advanced BIMAX spider for improved linearity Powerful optimized low distortion neodymium motor system Non-conducting fibre glass voice coil former for minimum damping Extended copper sleeve on pole piece for low inductance and reduced distortion CCAW voice coil for reduced moving mass Long life silver lead wires attached 180° apart for improved stability Vented pole piece and coil former for reduced compression High piston to chassis diameter ratio Gasket and bolt hole protrusions for reduced coupling to speaker cabinet

Post a comment / review

SB Acoustics SATORI_MW13PNW-4

Supplied on order
Speaker SB Acoustics Satori MW13PNW-4, impedance 4 ohm, 5 inch

Vented aerodynamic cast aluminium chassis for optimum strength and low compression Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house Soft low damping rubber surround for optimum transient response Advanced BIMAX spider for improved linearity Powerful optimized low distortion neodymium motor system Non-conducting fibre glass voice coil former for minimum damping Extended copper sleeve on pole piece for low inductance and reduced distortion CCAW voice coil for reduced moving mass Long life silver lead wires attached 180° apart for improved stability Vented pole piece and coil former for reduced compression High piston to chassis diameter ratio Gasket and bolt hole protrusions for reduced coupling to speaker cabinet

Post a comment / review

Items 1 to 15 of 179 total

per page
Set Descending Direction
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10


En poursuivant votre navigation sur ce site, vous acceptez l’utilisation de Cookies ou autres traceurs pour réaliser des statistiques de visites. En savoir plus
En poursuivant votre navigation sur ce site, vous acceptez l’utilisation de Cookies ou autres traceurs pour réaliser des statistiques de visites. En savoir plus