Speaker Oberton 15NMB600, 8 ohm, 15 inch
|
Oberton |
15NMB600 |
15NMB600-8 |
11115N0508 |
Cone driver |
|
|
Brand Oberton |
Model 15NMB600 |
TLHP code 15NMB600-8 |
Manufacturer code 11115N0508 |
|
|
Product type Cone driver |
|
|||
-
15NMB600 loudspeaker combining good linearity and efficiency with high power handling capabilities, with use of 100 mm copper voice coil and double silicone spider.
It features aluminium die cast frame with integrated triple demodulating rings and vented neodymium magnet structure. The massive heatsink improve the cooling of the magnet structure, which reduce power compression. 15NMB600 is suitable for application in a wide variety of enclosure types and particularly as LF driver in 2- or 3- way boxes and also it is suitable for horn loaded systems.
Application : High power midbass
KEY FEATURES :
100 db 1W / 1m average sensitivity
100 mm high temperature voice coil
1200 W AES program power
Vented neodymium magnet assembly with massive heatsink
Triple aluminium demodulating rings for lower distortion and improved heat dissipation
Double silicone spider for improved excursion control and linearity
General |
|
| Product type | Cone driver |
| Brand | Oberton |
| Reference | 15NMB600 |
| Product code | 11115N0508 |
Informations |
|
| Nominal impedance | 8 ohm |
| Dimensional category | 15.5 inch |
| Frequency coverage type | Sub, Low, Midbass |
| Manufacturer sensitivity | 100 dB |
| Calculated sensitivity | 100.04 dB |
| Nominal power handling | 600 W |
| Bandwidth | 45÷3000 Hz |
Fundamental parameters |
|
| Mms | 89.65 gr |
| Le | 1.01 mH |
| Re | 5.49 ohm |
Small signal parameters |
|
| Fs | 43.25 Hz |
| Qes | 0.178 |
| Qms | 7.22 |
| Qts | 0.174 |
| Vas | 145.15 L |
Datas |
|
| Xmax | ±5.25 mm |
| EBP | 243 Hz |
| Fs / Qts | 249 Hz |
| Vas * Qts² | 4.4 L |
| Calculated efficiency | 6.34 % |
| Weight | ~7.9 kg |
Dimensions |
|
| Voice coil diameter | 4 inch |
| Outside diameter | 388 mm |
| Baffle cutout diameter | 354 mm |
| Front thickness | 17.7 mm |
| Depth after front | 180.6 mm |
| Diamètre aimant (mm) | 180 mm |
Shape & Materials |
|
| Front chape | Cylindrical |
| Magnet type | Neodymium |
Question about Oberton 15NMB600-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Informations Oberton 15NMB600-8
It features aluminium die cast frame with integrated triple demodulating rings and vented neodymium magnet structure. The massive heatsink improve the cooling of the magnet structure, which reduce power compression. 15NMB600 is suitable for application in a wide variety of enclosure types and particularly as LF driver in 2- or 3- way boxes and also it is suitable for horn loaded systems.
Application : High power midbass
KEY FEATURES :
100 db 1W / 1m average sensitivity
100 mm high temperature voice coil
1200 W AES program power
Vented neodymium magnet assembly with massive heatsink
Triple aluminium demodulating rings for lower distortion and improved heat dissipation
Double silicone spider for improved excursion control and linearity
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes Oberton 15NMB600-8
SPL vs Impedance measure
Dimensions
