Speaker PHL Audio 5021M, 8 ohm, 15 inch
|
PHL Audio |
5021M |
5021M-8 |
Cone driver |
|
|
Brand PHL Audio |
Model 5021M |
TLHP code 5021M-8 |
|
|
Product type Cone driver |
|
||
Unavailable
-
High quality 15" LF driver for Studio / Monitoring, High fidelity systems. Low THD Flux stabilized Magnet System. Natural Convection Intercooling System. Both sides coated Curvilinear cone (Tropical withstanding). High compliance double half-roll fabric surround. Added mass (45 g) for low Fs.
Natural convection Intercooling System
Both sides coated Curvilinear cone (Tropical withstanding)
High compliance double half-roll fabric surround
Added mass (45 g) for low Fs
Ultra light injection molded basket
General |
|
| Product type | Cone driver |
| Brand | PHL Audio |
| Reference | 5021M |
Informations |
|
| Product manufacturer range | Non Standard |
| Nominal impedance | 8 ohm |
| Dimensional category | 15 inch, 16 inch |
| Frequency coverage type | Sub, Low, Midbass |
| Manufacturer sensitivity | 94.5 dB |
| Calculated sensitivity | 94.23 dB |
| Nominal power handling | 500 W |
| Max power handling | 1000 W |
| Bandwidth | 30÷2000 Hz |
Fundamental parameters |
|
| Sd | 892 cm² |
| Mms | 165 gr |
| Cms | 150 µm/N |
| Le | 1.65 mH |
| Re | 5.6 ohm |
| BL | 24 T.m |
Small signal parameters |
|
| Fs | 32 Hz |
| Qes | 0.32 |
| Qms | 4.15 |
| Qts | 0.3 |
| Vas | 169 L |
Datas |
|
| Xmax | ±7 mm |
| Calculated Xmax | ±8.3333 mm |
| Xvar, Xmech, Xlim | ±16 mm |
| Zmax | 7 |
| EBP | 100 Hz |
| Zmin | 6.7 ohm |
| Fs / Qts | 107 Hz |
| Vas * Qts² | 15.21 L |
| Efficiency | 1.7 % |
| Calculated efficiency | 1.67 % |
| Weight | ~8.1 kg |
| Air volume occupied by the driver | 4.4 L |
| Recommended load volume | 110 L |
| Fréquence d'accord liée à la charge | 32 Hz |
Dimensions |
|
| Voice coil diameter | 3 inch |
| Winding depth | 20 mm |
| Gap height | 10 mm |
| External dimensions | 380.5 | 406.5 mm |
| Baffle cutout diameter | 354 mm |
| Depth | 168.3 mm |
| Front thickness | 12.8 mm |
| Depth after front | 155.5 mm |
| Diamètre aimant (mm) | 204 mm |
Shape & Materials |
|
| Front chape | Non cylindrical |
| Magnet type | Ferrite |
| Basket masterial | Aluminium |
| Surround shape | Double roll |
| Surround material | Cloth |
Question about PHL Audio 5021M-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Repair PHL Audio 5021M-8
With PHL Audio 5021M-8, customers has also bought
Informations PHL Audio 5021M-8
High quality 15" LF driver for Studio / Monitoring, High fidelity systems. Low THD Flux stabilized Magnet System. Natural Convection Intercooling System. Both sides coated Curvilinear cone (Tropical withstanding). High compliance double half-roll fabric surround. Added mass (45 g) for low Fs.
Natural convection Intercooling System
Both sides coated Curvilinear cone (Tropical withstanding)
High compliance double half-roll fabric surround
Added mass (45 g) for low Fs
Ultra light injection molded basket
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Natural convection Intercooling System
Both sides coated Curvilinear cone (Tropical withstanding)
High compliance double half-roll fabric surround
Added mass (45 g) for low Fs
Ultra light injection molded basket
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Dimensions
