Speaker Peerless SLS-P830946, 4 ohm, 7.17/6.46 inch
|
Peerless |
SLS-P830946 |
Cone driver |
|
|
Brand Peerless |
TLHP code SLS-P830946 |
|
|
Product type Cone driver |
|
|
Unavailable
-
This 6.5 inch 4 ohm member of the SLS family features a rigid steel basket, a paper cone, and a ferrite magnet motor with aluminium shorting ring for improved distortion performance.
The SLS line combines high quality performance with an affordable design.
General |
|
| Product type | Cone driver |
| Brand | Peerless |
Informations |
|
| Nominal impedance | 4 ohm |
| Dimensional category | 6.5 inch, 7 inch |
| Frequency coverage type | Sub, Low, Midbass |
| Manufacturer sensitivity | 84.6 dB |
| Calculated sensitivity | 83.28 dB |
| Nominal power handling | 75 W |
| Bandwidth | 30÷600 Hz |
Fundamental parameters |
|
| Sd | 124 cm² |
| Mms | 40.6 gr |
| Cms | 280 µm/N |
| Le | 0.68 mH |
| Re | 2.7 ohm |
| BL | 8.51 T.m |
Small signal parameters |
|
| Fs | 47 Hz |
| Qes | 0.45 |
| Qms | 7.42 |
| Qts | 0.43 |
| Vas | 6.03 L |
Datas |
|
| Xmax | ±10.9 mm |
| Calculated Xmax | ±10.87 mm |
| EBP | 104 Hz |
| Zmin | 3.5 ohm |
| Fs / Qts | 109 Hz |
| Vas * Qts² | 1.12 L |
| Calculated efficiency | 0.14 % |
| Weight | ~2.5 kg |
Dimensions |
|
| Voice coil diameter | 1.5 inch |
| Winding depth | 24.4 mm |
| Gap height | 8 mm |
| External dimensions | 164 | 182 mm |
| Baffle cutout diameter | 146 mm |
| Depth | 93.8 mm |
| Front thickness | 10.8 mm |
| Depth after front | 83 mm |
| Diamètre aimant (mm) | 115 mm |
Shape & Materials |
|
| Front chape | Non cylindrical |
| Magnet type | Ferrite |
| Basket masterial | Acier |
| Surround shape | One roll |
| Surround material | Rubber |
Question about Peerless SLS-P830946
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
With Peerless SLS-P830946, customers has also bought
Informations Peerless SLS-P830946
This 6.5 inch 4 ohm member of the SLS family features a rigid steel basket, a paper cone, and a ferrite magnet motor with aluminium shorting ring for improved distortion performance.
The SLS line combines high quality performance with an affordable design.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
The SLS line combines high quality performance with an affordable design.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes Peerless SLS-P830946
SPL vs Impedance measure
Dimensions
