SB Acoustics |
SATORI_MW13TX-4 |
Cone driver |
Sold by piece |
|
Brand SB Acoustics |
TLHP code SATORI_MW13TX-4 |
||
Product type Cone driver |
Sales packaging Sold by Piece |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 5 weeks
General |
|
Product type | Cone driver |
Brand | SB Acoustics |
Informations |
|
Product manufacturer range | 5 inch, Midwoofer, Satori |
Nominal impedance | 4 ohm |
Dimensional category | 5 inch |
Frequency coverage type | Sub |
Manufacturer sensitivity | 89 dB |
Calculated sensitivity | 86.97 dB |
Nominal power handling | 40 W |
Fundamental parameters |
|
Sd | 70 cm² |
Mms | 7.4 gr |
Cms | 2380 µm/N |
Le | 0.16 mH |
Re | 3.8 ohm |
BL | 5 T.m |
Small signal parameters |
|
Fs | 38 Hz |
Qes | 0.27 |
Qms | 5.08 |
Qts | 0.26 |
Vas | 16 L |
Datas |
|
Flux density | 1.08 T |
Xmax | ±5 mm |
Calculated Xmax | ±6.67 mm |
EBP | 141 Hz |
Fs / Qts | 146 Hz |
Vas * Qts² | 1.09 L |
Calculated efficiency | 0.32 % |
Weight | ~0.79 kg |
Dimensions |
|
Voice coil diameter | 1.2 inch |
Winding depth | 15 mm |
Gap height | 5 mm |
Outside diameter | 132 mm |
Baffle cutout diameter | 110.6 mm |
Depth | 73.6 mm |
Front thickness | 10.1 mm |
Depth after front | 63.5 mm |
Diamètre aimant (mm) | 63 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Neodymium |
Basket masterial | Aluminium |
Winding material | CCAW (Copper-clad aluminium wire) |
Voice coil former | Glass fiber |
Surround shape | One roll |
Surround material | Rubber |
Spider material | Bimax |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
|
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.