SEAS |
L12RCY/P |
L12RCY/P-8 |
H1207-08 |
Cone driver |
Sold by piece |
|
Brand SEAS |
Model L12RCY/P |
TLHP code L12RCY/P-8 |
Manufacturer code H1207-08 |
||
Product type Cone driver |
Sales packaging Sold by Piece |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 5 weeks
Stiff, yet light aluminium cone and low loss rubber surround show no sign of the
familiar 500-1500 Hz cone edge resonance and distortion associated with soft cones.
High temperature voice coil wound on an aluminium voice coil former gives high
power handling capacity.
Bullet shaped phase plug reduces compression due to temperature variations in the
voice coil, avoids resonance problems which would occur in the volume between the
dust cap and the pole piece and increases the long term power handling
capacity.
Extra large magnet provides high efficiency and low Q. This unit may be used in very small two-way ported systems producing an astonishingly deep bass and a clean, neutral midrange.
General |
|
Product type | Cone driver |
Brand | SEAS |
Reference | L12RCY/P |
Product code | H1207-08 |
Informations |
|
Nominal impedance | 8 ohm |
Dimensional category | 4.5 inch |
Frequency coverage type | Low, Midbass, Midrange |
Manufacturer sensitivity | 85.5 dB |
Calculated sensitivity | 84.62 dB |
Nominal power handling | 70 W |
Max power handling | 200 W |
Bandwidth | 55÷3500 Hz |
Fundamental parameters |
|
Sd | 50 cm² |
Mms | 6.8 gr |
Cms | 1500 µm/N |
Rms | 0.94 kg/s |
Le | 0.76 mH |
Re | 5.5 ohm |
BL | 6.1 T.m |
Small signal parameters |
|
Fs | 50 Hz |
Qes | 0.33 |
Qms | 2.34 |
Qts | 0.29 |
Vas | 5 L |
Datas |
|
Flux density | 1.1 T |
Xmax | ±3 mm |
Calculated Xmax | ±5 mm |
Xvar, Xmech, Xlim | ±4.5 mm |
EBP | 152 Hz |
Fs / Qts | 172 Hz |
Vas * Qts² | 0.43 L |
Calculated efficiency | 0.19 % |
Weight | ~0.29 kg |
Dimensions |
|
Voice coil diameter | 1.02 inch |
Winding depth | 12 mm |
Gap height | 6 mm |
Outside diameter | 120.4 mm |
Baffle cutout diameter | 95.8 mm |
Depth | 63.5 mm |
Front thickness | 5 mm |
Depth after front | 58.5 mm |
Diamètre aimant (mm) | 90 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Ferrite |
Basket masterial | Acier |
Voice coil former | Aluminium |
Surround shape | One roll |
Surround material | Rubber |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
* The frequency responses above show measured free field sound pressure in 0
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.