Compression driver Peerless DFM-2544R00-08, 8 ohm, 1-inch throat
|
Peerless |
DFM-2544R00-08 |
Compression driver |
|
|
Brand Peerless |
TLHP code DFM-2544R00-08 |
|
|
Product type Compression driver |
|
|
Unavailable
-
This 1.75 inch diaphragm 1inch exit compression driver is for use in high quality professional sound reinforcement systems. The magnet system was designed for high sensitivity while keeping the weight and cost to a minimum. The 3-slot phasing plug and aluminum wire voice coil give improved HF energy. The titanium diaphragm is coated with a light, thin layer of unique damping material which results in a smoother sound, especially when driven hard. All of the materials resist environmental factor of heat, vibration and aging ensuring many years of stable performance.
General |
|
| Product type | Compression driver |
| Brand | Peerless |
Informations |
|
| Nominal impedance | 8 ohm |
| Manufacturer sensitivity | 104.5 dB |
| Nominal power handling | 60 W |
| Bandwidth | 780÷2000 Hz |
| Exit dimension | 1.0 inch |
Fundamental parameters |
|
| Mms | 0.3 gr |
| Le | 0.04 mH |
| Re | 6.09 ohm |
Small signal parameters |
|
| Fs | 784 Hz |
| Qes | 2.03 |
| Qms | 2.02 |
| Qts | 1.01 |
Datas |
|
| Xmax | ±0.3 mm |
| EBP | 386 Hz |
| Fs / Qts | 776 Hz |
| Weight | ~1.8 kg |
Dimensions |
|
| Voice coil diameter | 1.75 inch |
| Diamètre aimant (mm) | 115 mm |
| Driver mounting system | 2 points on diameter 76 mm |
| Driver mounting system N°2 | 3 points on diameter 57 mm |
Shape & Materials |
|
| Magnet type | Ferrite |
Question about Peerless DFM-2544R00-08
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
With Peerless DFM-2544R00-08, customers has also bought
Informations Peerless DFM-2544R00-08
This 1.75 inch diaphragm 1inch exit compression driver is for use in high quality professional sound reinforcement systems. The magnet system was designed for high sensitivity while keeping the weight and cost to a minimum. The 3-slot phasing plug and aluminum wire voice coil give improved HF energy. The titanium diaphragm is coated with a light, thin layer of unique damping material which results in a smoother sound, especially when driven hard. All of the materials resist environmental factor of heat, vibration and aging ensuring many years of stable performance.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes Peerless DFM-2544R00-08
SPL vs Impedance measure
Dimensions
