Compression Ferrite

there are 14 products

per page
Set Descending Direction


Eighteen Sound HD1030

Supplied on quotation
Compression driver 18 Sound HD1030, 8 ohm 8 ohm

The HD1030 1 inch exit high frequency compression driver has been designed for use in two-way audio systems. The transducer exhibits a constant slope response from 1.5kHz to 18kHz with a uniform and smooth roll-off. With a 800 Hz free air resonance frequency, the HD1030 can easily be cut-off at 1800Hz and is capable of 60W continuous power handling with a 1800Hz pink-noise signal, and a 6dB crest factor with a minimum 12dB/oct crossover slope. Equipped with unique Phase Plug architecture, the HD1030 has been designed to give a smooth coherent wavefront at the horn entrance in the whole working frequency range, as well as high level manufacturing consistency. The phase plug with its short openings and high flare rate value assures low distortion and demonstrates remarkable improvements in mid-high frequency reproduction. The titanium diaphragm assembly, with its ellipsoidal suspension shape, exhibits a constant slope response from 1.5kHz up to 18kHz with uniform smooth roll-off behavior. An edge-wound aluminum voice coil, wound on proprietary treated Nomex, completes the diaphragm assembly. Nomex shows a 30% higher value of tensile elongation at a working operative temperature (200°C) when compared to Kapton. This feature enables proper energy transfer control from the voice coil to the dome in real working conditions. Moreover, this proprietary former material is also suitable for use in higher moisture content environments. The HD1030 powerful ceramic magnet assembly has been designed to obtain 15 KGauss in the gap within a compact ferrite motor structure.

Post a comment / review

0421M8H810 8ohm
0421M8H810 8ohm

Eighteen Sound HD1040

Supplied on quotation
Compression driver 18 Sound HD1040, 16 ohm 16 ohm

The HD1040 one inch exit high frequency compression driver has been designed for use in high quality audio systems. Equipped with proprietary Phase Plug architecture, the HD1040 has been designed to give high level manufacturing consistency and smooth coherent wave front at the horn entrance across the whole working frequency range. The phase plug with its short openings and high flare rate value assures low distortion and demonstrates remarkable improvements in mid-high frequency reproduction. The HD1040 diaphragm assembly is made by proprietary treated Polyethylene material. Thanks to its superior diaphragm dimensional stability (160°C), the polyethilene shows constant behaviour during its whole working life. Moreover, this particular material with its very high value of elasticity modulus, (50% more than standard Mylar and 100% more than polyimide film) is capable of superior transient and intermodulation distortion response. The flat suspension shape is designed to maintain low stiffness and low mid band distortion and response. An edge-wound aluminum voice coil wound on proprietary treated Nomex completes the diaphragm assembly. Thanks to its physical properties, the proprietary treated Nomex former shows a 30% higher value of tensile elongation at a working operative temperature, (200°C) when compared to Kapton. This feature enables proper energy transfer control from the voice coil to the dome in real working conditions. Moreover, this proprietary former material is suitable for use in damp and wet environments. The HD1040 powerful ceramic magnet assembly has been designed to obtain 16 KGauss in the gap within a compact ferrite motor structure.

Post a comment / review

0421M8H810 8ohm
0421061040 16 Ohm
0421M8H810 8ohm
0421061040 16 Ohm

Eighteen Sound HD1040

Supplied on quotation
Compression driver 18 Sound HD1040, 8 ohm 8 ohm

The HD1040 one inch exit high frequency compression driver has been designed for use in high quality audio systems. Equipped with proprietary Phase Plug architecture, the HD1040 has been designed to give high level manufacturing consistency and smooth coherent wave front at the horn entrance across the whole working frequency range. The phase plug with its short openings and high flare rate value assures low distortion and demonstrates remarkable improvements in mid-high frequency reproduction. The HD1040 diaphragm assembly is made by proprietary treated Polyethylene material. Thanks to its superior diaphragm dimensional stability (160°C), the polyethilene shows constant behaviour during its whole working life. Moreover, this particular material with its very high value of elasticity modulus, (50% more than standard Mylar and 100% more than polyimide film) is capable of superior transient and intermodulation distortion response. The flat suspension shape is designed to maintain low stiffness and low mid band distortion and response. An edge-wound aluminum voice coil wound on proprietary treated Nomex completes the diaphragm assembly. Thanks to its physical properties, the proprietary treated Nomex former shows a 30% higher value of tensile elongation at a working operative temperature, (200°C) when compared to Kapton. This feature enables proper energy transfer control from the voice coil to the dome in real working conditions. Moreover, this proprietary former material is suitable for use in damp and wet environments. The HD1040 powerful ceramic magnet assembly has been designed to obtain 16 KGauss in the gap within a compact ferrite motor structure.

Post a comment / review

0421M8H810 8ohm
0421061040 16 Ohm
0421081040 8 Ohm
0421M8H810 8ohm
0421061040 16 Ohm
0421081040 8 Ohm

Eighteen Sound HD1050

Supplied on quotation
Compression driver 18 Sound HD1050, 16 ohm 16 ohm

The HD1050 one inch exit high frequency compression driver has been designed for use in high quality audio systems. Equipped with Eighteen Sound proprietary Phase Plug architecture, the HD1050 has been designed to give high level manufacturing consistency and smooth coherent wave front at the horn entrance across the whole working frequency range. The phase plug with its short openings and high flare rate value assures low distortion and demonstrates remarkable improvements in mid-high frequency reproduction. The diaphragm assembly is composed of a titanium dome sandwiched to a proprietary treated polyester suspension unit. It has been designed to maintain low resonance, lowering the minimum crossover point value at 1,6kHz. An edge-wound aluminum voice coil, wound on proprietary treated Nomex, completes the diaphragm assembly. Thanks to its physical properties, the proprietary treated Nomex former has a 30% higher value of tensile elongation at a working operative temperature (200°C) when compared to Kapton. This feature enables proper energy transfer control from the voice coil to the dome in real working conditions. Moreover, this proprietary former material is also suitable to for use in higher moisture content environments. The HD1050 powerful ceramic magnet assembly has been designed to obtain 16 KGauss in the gap and within a compact ferrite motor structure.

Post a comment / review

0421M8H810 8ohm
0421061040 16 Ohm
0421081040 8 Ohm
0421061050 16 Ohm
0421M8H810 8ohm
0421061040 16 Ohm
0421081040 8 Ohm
0421061050 16 Ohm

Eighteen Sound HD1050

Supplied on quotation
Compression driver 18 Sound HD1050, 8 ohm 8 ohm

The HD1050 one inch exit high frequency compression driver has been designed for use in high quality audio systems. Equipped with Eighteen Sound proprietary Phase Plug architecture, the HD1050 has been designed to give high level manufacturing consistency and smooth coherent wave front at the horn entrance across the whole working frequency range. The phase plug with its short openings and high flare rate value assures low distortion and demonstrates remarkable improvements in mid-high frequency reproduction. The diaphragm assembly is composed of a titanium dome sandwiched to a proprietary treated polyester suspension unit. It has been designed to maintain low resonance, lowering the minimum crossover point value at 1,6kHz. An edge-wound aluminum voice coil, wound on proprietary treated Nomex, completes the diaphragm assembly. Thanks to its physical properties, the proprietary treated Nomex former has a 30% higher value of tensile elongation at a working operative temperature (200°C) when compared to Kapton. This feature enables proper energy transfer control from the voice coil to the dome in real working conditions. Moreover, this proprietary former material is also suitable to for use in higher moisture content environments. The HD1050 powerful ceramic magnet assembly has been designed to obtain 16 KGauss in the gap and within a compact ferrite motor structure.

Post a comment / review

0421M8H810 8ohm
0421061040 16 Ohm
0421081040 8 Ohm
0421061050 16 Ohm
0421081050 8 Ohm
0421M8H810 8ohm
0421061040 16 Ohm
0421081040 8 Ohm
0421061050 16 Ohm
0421081050 8 Ohm

Eighteen Sound HD125

Supplied on quotation
Compression driver 18 Sound HD125, 16 ohm 16 ohm

The HD125 1 inch exit HF unit has been designed as the natural evolution of the industry standard HD120 compression driver. It delivers an unmatched combination of extended linear frequency response and very high efficiency. The HD125 diaphragm assembly is made in proprietary treated polyethylene material. This design maintains the minimum resonance frequency point value at 1600 Hz, extending the frequency response in the mid region when compared to HD120 compression driver. The design of diaphragm and its surround in polyester material allow a best movement and stress control; the special radial ribs increase stiffness avoiding uncontrolled vibration modes in the usable frequency range. An edge-wound aluminum voice coil, wounded on proprietary treated Nomex, completes diaphragm assembly. Thanks to its physical properties, the voice coil former shows 30% higher value of tensile elongation at working operative temperature (200°C) when compared to Kapton. This plus is capable to keep properly energy transfer control to the dome in real working conditions. Moreover, this particular former material is suitable to work also in higher moisture contents environments. The polypropylene phase plug is the result of a meticulous design exercise. Its shape assures the correct acoustic impedance of the radiating dome, reducing distortion levels across a very wide frequency range. At the end, it results in a smooth coherent wavefront in the horn entrance, high thermal stability and manufacturing consistency. The HD125 compact size and lightweight ceramic magnet assembly has been designed to obtain 16 KGauss in the gap.

Post a comment / review

0421M8H810 8ohm
0421061040 16 Ohm
0421081040 8 Ohm
0421061050 16 Ohm
0421081050 8 Ohm
0421M6H100 16 Ohm
0421M8H810 8ohm
0421061040 16 Ohm
0421081040 8 Ohm
0421061050 16 Ohm
0421081050 8 Ohm
0421M6H100 16 Ohm

Eighteen Sound HD125

Supplied on quotation
Compression driver 18 Sound HD125, 8 ohm 8 ohm

The HD125 1 inch exit HF unit has been designed as the natural evolution of the industry standard HD120 compression driver. It delivers an unmatched combination of extended linear frequency response and very high efficiency. The HD125 diaphragm assembly is made in proprietary treated polyethylene material. This design maintains the minimum resonance frequency point value at 1600 Hz, extending the frequency response in the mid region when compared to HD120 compression driver. The design of diaphragm and its surround in polyester material allow a best movement and stress control; the special radial ribs increase stiffness avoiding uncontrolled vibration modes in the usable frequency range. An edge-wound aluminum voice coil, wounded on proprietary treated Nomex, completes diaphragm assembly. Thanks to its physical properties, the voice coil former shows 30% higher value of tensile elongation at working operative temperature (200°C) when compared to Kapton. This plus is capable to keep properly energy transfer control to the dome in real working conditions. Moreover, this particular former material is suitable to work also in higher moisture contents environments. The polypropylene phase plug is the result of a meticulous design exercise. Its shape assures the correct acoustic impedance of the radiating dome, reducing distortion levels across a very wide frequency range. At the end, it results in a smooth coherent wavefront in the horn entrance, high thermal stability and manufacturing consistency. The HD125 compact size and lightweight ceramic magnet assembly has been designed to obtain 16 KGauss in the gap.

Post a comment / review

0421M8H810 8ohm
0421061040 16 Ohm
0421081040 8 Ohm
0421061050 16 Ohm
0421081050 8 Ohm
0421M6H100 16 Ohm
0421M8H100 8 Ohm
0421M8H810 8ohm
0421061040 16 Ohm
0421081040 8 Ohm
0421061050 16 Ohm
0421081050 8 Ohm
0421M6H100 16 Ohm
0421M8H100 8 Ohm

Eighteen Sound HD2080T

199.32 IT/piece
In stock
Compression driver 18 Sound HD2080T, 8 ohm 8 ohm

The HD2080T 2-inch exit high frequency compression driver has been designed for use in high quality installed audio systems, where weight is not the key issue. The motor structure, throughout the precisely coherent phase plug with 3 circumferential slots and copper ring on the pole piece, reduces inductance effects and distortion. Four top plate air ducts have been designed to act as a loading chamber for the diaphragm, implementing mid band distortion and response figures. The HD2080T diaphragm assembly is composed of a titanium dome sandwiched to a proprietary treated polyester suspension unit. It has been designed to maintain low resonance, lowering the minimum crossover point value at 1,2kHz. Thanks to its physical properties, the proprietary treated Nomex former has a 30% higher value of tensile elongation at a working operative temperature (200°C) when compared to Kapton. This feature enables proper energy transfer control from the voice coil to the dome in real working conditions. Moreover, this proprietary former material is also suitable to for use in higher moisture content environments. The HD2080T powerful ceramic magnet assembly has been designed to obtain 16KGauss in the gap. Excellent heat dissipation and thermal exchange are guaranteed by the direct contact between the magnetic structure and the aluminum cover which leads to a lower power compression value.

Post a comment / review

0421M8H810 8ohm
0421061040 16 Ohm
0421081040 8 Ohm
0421061050 16 Ohm
0421081050 8 Ohm
0421M6H100 16 Ohm
0421M8H100 8 Ohm
0423A8H610 8ohm
0421M8H810 8ohm
0421061040 16 Ohm
0421081040 8 Ohm
0421061050 16 Ohm
0421081050 8 Ohm
0421M6H100 16 Ohm
0421M8H100 8 Ohm
0423A8H610 8ohm

Eighteen Sound ND3ST

Supplied on quotation
Compression driver 18 Sound ND3ST, 16 ohm, throat 1.4 inch 16 ohm

The ND3ST 1.4 inch exit Natural Sound neodymium high frequency compression driver has been designed to fulfill state of the art performances needed for present and future very high quality sound reinforcement applications.

Post a comment / review

0421M8H810 8ohm
0421061040 16 Ohm
0421081040 8 Ohm
0421061050 16 Ohm
0421081050 8 Ohm
0421M6H100 16 Ohm
0421M8H100 8 Ohm
0423A8H610 8ohm
0421M8H810 8ohm
0421061040 16 Ohm
0421081040 8 Ohm
0421061050 16 Ohm
0421081050 8 Ohm
0421M6H100 16 Ohm
0421M8H100 8 Ohm
0423A8H610 8ohm

Eighteen Sound ND3ST

Supplied on quotation
Compression driver 18 Sound ND3ST, 8 ohm, throat 1.4 inch 8 ohm

The ND3ST 1.4 inch exit Natural Sound neodymium high frequency compression driver has been designed to fulfill state of the art performances needed for present and future very high quality sound reinforcement applications.

Post a comment / review

0421M8H810 8ohm
0421061040 16 Ohm
0421081040 8 Ohm
0421061050 16 Ohm
0421081050 8 Ohm
0421M6H100 16 Ohm
0421M8H100 8 Ohm
0423A8H610 8ohm
0423T8N400
0421M8H810 8ohm
0421061040 16 Ohm
0421081040 8 Ohm
0421061050 16 Ohm
0421081050 8 Ohm
0421M6H100 16 Ohm
0421M8H100 8 Ohm
0423A8H610 8ohm
0423T8N400

Eighteen Sound ND3T

Supplied on quotation
Compression driver 18 Sound ND3T, 16 ohm, throat 1.4 inch 16 ohm

The ND3T 1.4 inch exit Natural Sound neodymium high frequency compression driver has been designed for high level sound systems application. The unit has been designed to fulfill tight geometrical requirements, thanks to its ultra compact 109mm overall diameter.

Post a comment / review

0421M8H810 8ohm
0421061040 16 Ohm
0421081040 8 Ohm
0421061050 16 Ohm
0421081050 8 Ohm
0421M6H100 16 Ohm
0421M8H100 8 Ohm
0423A8H610 8ohm
0423T8N400
0423T6N300
0421M8H810 8ohm
0421061040 16 Ohm
0421081040 8 Ohm
0421061050 16 Ohm
0421081050 8 Ohm
0421M6H100 16 Ohm
0421M8H100 8 Ohm
0423A8H610 8ohm
0423T8N400
0423T6N300

Eighteen Sound ND3T

Supplied on quotation
Compression driver 18 Sound ND3T, 8 ohm, throat 1.4 inch 8 ohm

The ND3T 1.4 inch exit Natural Sound neodymium high frequency compression driver has been designed for high level sound systems application. The unit has been designed to fulfill tight geometrical requirements, thanks to its ultra compact 109mm overall diameter.

Post a comment / review

0421M8H810 8ohm
0421061040 16 Ohm
0421081040 8 Ohm
0421061050 16 Ohm
0421081050 8 Ohm
0421M6H100 16 Ohm
0421M8H100 8 Ohm
0423A8H610 8ohm
0423T8N400
0423T6N300
0421M8H810 8ohm
0421061040 16 Ohm
0421081040 8 Ohm
0421061050 16 Ohm
0421081050 8 Ohm
0421M6H100 16 Ohm
0421M8H100 8 Ohm
0423A8H610 8ohm
0423T8N400
0423T6N300

Eighteen Sound XD125

Supplied on quotation
Horn+Compression driver 18 Sound XD125, 16 ohm 16 ohm

The XD125 has been designed for 2 way or 3 way systems. It will deliver an unmatched combination of extended linear frequency response and very high efficiency. The major advancement in XD125 compression driver consists in a new innovative diaphragm assembly made in proprietary treated polyethylene material. This design maintains the minimum resonance frequency point value at 1600Hz, extending the frequency response in the mid region when compared to previous compression driver model, the XD120. The design of diaphragm and surround in polyester material allows better control in terms of movement and mechanical stress. Radial ribs increase stiffness avoiding uncontrolled vibration modes in the usable frequency range. An edge-wound aluminum voice coil, wounded on proprietary treated Nomex, completes diaphragm assembly. Proprietary treated Nomex former, thanks to its physical properties, shows 30% higher value of tensile elongation at working operative temperature(200°C) when compared to Kapton. This plus is capable to keep properly energy transfer control to the dome in real working conditions. Moreover, Eighteen Sound voice coil proprietary Nomex former is suitable to work also in environments with higher moisture contents. The polypropylene phase plug is the result of a meticulous design exercise. Its shape assures the correct acoustic impedance of the radiating dome, reducing distortion levels across a very wide range of frequency. Final result is a smooth coherent wavefront in the horn entrance, high thermal stability and manufacturing consistency. The compact and lightweight ceramic magnet assembly has been designed to obtain 16KGauss in the gap. The XD125 pressure die-cast polyurethane foam horn maintains constant nominal 90° Horizontal x 60° Vertical pattern control, providing consistent on-axis and off-axis frequency response from 2kHz to 16kHz in the horizontal plane and from 2,5kHz to 16 kHz in the vertical plane. Horn directivity is constant from 2,5kHz. Computer Aided Finite Element Analysis and extensive testing were used to obtain the horn contours. Horn is designed to be free of resonance and vibrations assuring maximum strength

Post a comment / review

0421M8H810 8ohm
0421061040 16 Ohm
0421081040 8 Ohm
0421061050 16 Ohm
0421081050 8 Ohm
0421M6H100 16 Ohm
0421M8H100 8 Ohm
0423A8H610 8ohm
0423T8N400
0423T6N300
0421M6X100 16ohm
0421M8H810 8ohm
0421061040 16 Ohm
0421081040 8 Ohm
0421061050 16 Ohm
0421081050 8 Ohm
0421M6H100 16 Ohm
0421M8H100 8 Ohm
0423A8H610 8ohm
0423T8N400
0423T6N300
0421M6X100 16ohm

Eighteen Sound XD125

Supplied on quotation
Horn+Compression driver 18 Sound XD125, 8 ohm 8 ohm

The XD125 has been designed for 2 way or 3 way systems. It will deliver an unmatched combination of extended linear frequency response and very high efficiency. The major advancement in XD125 compression driver consists in a new innovative diaphragm assembly made in proprietary treated polyethylene material. This design maintains the minimum resonance frequency point value at 1600Hz, extending the frequency response in the mid region when compared to previous compression driver model, the XD120. The design of diaphragm and surround in polyester material allows better control in terms of movement and mechanical stress. Radial ribs increase stiffness avoiding uncontrolled vibration modes in the usable frequency range. An edge-wound aluminum voice coil, wounded on proprietary treated Nomex, completes diaphragm assembly. Proprietary treated Nomex former, thanks to its physical properties, shows 30% higher value of tensile elongation at working operative temperature(200°C) when compared to Kapton. This plus is capable to keep properly energy transfer control to the dome in real working conditions. Moreover, Eighteen Sound voice coil proprietary Nomex former is suitable to work also in environments with higher moisture contents. The polypropylene phase plug is the result of a meticulous design exercise. Its shape assures the correct acoustic impedance of the radiating dome, reducing distortion levels across a very wide range of frequency. Final result is a smooth coherent wavefront in the horn entrance, high thermal stability and manufacturing consistency. The compact and lightweight ceramic magnet assembly has been designed to obtain 16KGauss in the gap. The XD125 pressure die-cast polyurethane foam horn maintains constant nominal 90° Horizontal x 60° Vertical pattern control, providing consistent on-axis and off-axis frequency response from 2kHz to 16kHz in the horizontal plane and from 2,5kHz to 16 kHz in the vertical plane. Horn directivity is constant from 2,5kHz. Computer Aided Finite Element Analysis and extensive testing were used to obtain the horn contours. Horn is designed to be free of resonance and vibrations assuring maximum strength

Post a comment / review

0421M8H810 8ohm
0421061040 16 Ohm
0421081040 8 Ohm
0421061050 16 Ohm
0421081050 8 Ohm
0421M6H100 16 Ohm
0421M8H100 8 Ohm
0423A8H610 8ohm
0423T8N400
0423T6N300
0421M6X100 16ohm
0421M8X100 8ohm
0421M8H810 8ohm
0421061040 16 Ohm
0421081040 8 Ohm
0421061050 16 Ohm
0421081050 8 Ohm
0421M6H100 16 Ohm
0421M8H100 8 Ohm
0423A8H610 8ohm
0423T8N400
0423T6N300
0421M6X100 16ohm
0421M8X100 8ohm

there are 14 products

per page
Set Descending Direction


En poursuivant votre navigation sur ce site, vous acceptez l’utilisation de Cookies ou autres traceurs pour réaliser des statistiques de visites. En savoir plus
En poursuivant votre navigation sur ce site, vous acceptez l’utilisation de Cookies ou autres traceurs pour réaliser des statistiques de visites. En savoir plus