Compression Neodymium

Items 1 to 15 of 32 total

per page
Set Descending Direction
Page:
  1. 1
  2. 2
  3. 3


Eighteen Sound ND1018BT

121.50 IT/piece
Processing in supply
Compression driver 18 Sound ND1018BT, 8 ohm, 1.0 inch exit 8 ohm

The ND1018BT 1-inch exit high frequency compression driver is designed for high quality two-way systems applications. Equipped with proprietary Phase Plug architecture, the ND1018BT compression driver offers high level manufacturing consistency and smooth coherent wavefront at horn entrance over all the working frequency range. The phase plug design with short openings and high flare rate value assures low distortion and remarkable improvements in mid-high frequency reproduction. With its ellipsoidal suspension shape, the ND1018BT titanium diaphragm assembly exhibits constant slope response from 1kHz to 18kHz with uniform smooth roll-off behavior. An edge-wound aluminum voice coil, wounded on proprietary treated Nomex, completes diaphragm assembly. Thanks to its physical properties, the proprietary treated Nomex former shows 30% higher value of tensile elongation at working operative temperature (200°C) when compared to Kapton. Moreover, this proprietary former material is suitable to work also in higher moisture contents environments. Through careful use of elementary pieces of neodymium magnets, Eighteen Sound engineers have developed a powerful neodymium magnet assembly able to reach 18 KGauss in the gap in compact and lightweight structure. A copper ring on the pole piece reduces inductance above 10 kHz improving phase and impedance linearization. The custom designed O-ring creates a tight seal between the plate and the cover assuring air chamber loading. For the increase in use of high power audio systems at outdoor events or in marine environments, the ability to perform properly under inclement weather conditions is a key-point of the Eighteen Sound philosophy. In addition, the special treatment applied to the magnet and the top and back plates of the magnetic structure makes the driver more resistant to the corrosive effects of salts and oxidization.

Post a comment / review

0421T8M430 8ohm
0421T8M430 8ohm

Eighteen Sound ND1030

76.50 IT/piece
Supplied on order
Compression driver 18 Sound ND1030, 16 ohm, 1.0 inch exit 16 ohm

The ND1030 1-inch exit high frequency compression driver has been designed for use in high quality two-way audio systems. The ND1030 exhibits a constant slope response from 1.5kHz to 18kHz with a uniform and smooth roll-off. With a 900Hz free air resonance frequency, the ND1030 can easily be cut-off at 1800Hz and is capable of 60W continuous power handling with a 1800Hz pink-noise signal, and a 6dB crest factor with a minimum 12dB/oct crossover slope. Equipped with unique Phase Plug architecture, the ND1030 has been designed to give a smooth coherent wavefront at the horn entrance in the whole working frequency range, as well as high level manufacturing consistency. The phase plug design with its short openings and high flare rate value assures low distortion and demonstrates remarkable improvements in mid-high frequency reproduction. The ND1030 titanium diaphragm assembly, with its ellipsoidal suspension shape, exhibits a constant slope response from 1kHz to 18kHz with uniform smooth roll-off behavior. An edge-wound aluminum voice coil, wound on proprietary treated Nomex, completes the diaphragm assembly. Nomex shows a 30% higher value of tensile elongation at a working operative temperature (200°C) when compared to Kapton. This feature enables proper energy transfer control from the voice coil to the dome in real working conditions. Moreover, this proprietary former material is also suitable for use in higher moisture content environments. By careful use of elementary pieces of neodymium magnets, Eighteen Sound engineers have developed a powerful neodymium magnet assembly capable of reaching 18KGauss in the gap within a compact and lightweight structure.

Post a comment / review

0421T8M430 8ohm
0421M6N800 16 ohm
0421T8M430 8ohm
0421M6N800 16 ohm

Eighteen Sound ND1030

76.50 IT/piece
In stock
Compression driver 18 Sound ND1030, 8 ohm, 1.0 inch exit 8 ohm

The ND1030 1-inch exit high frequency compression driver has been designed for use in high quality two-way audio systems. The ND1030 exhibits a constant slope response from 1.5kHz to 18kHz with a uniform and smooth roll-off. With a 900Hz free air resonance frequency, the ND1030 can easily be cut-off at 1800Hz and is capable of 60W continuous power handling with a 1800Hz pink-noise signal, and a 6dB crest factor with a minimum 12dB/oct crossover slope. Equipped with unique Phase Plug architecture, the ND1030 has been designed to give a smooth coherent wavefront at the horn entrance in the whole working frequency range, as well as high level manufacturing consistency. The phase plug design with its short openings and high flare rate value assures low distortion and demonstrates remarkable improvements in mid-high frequency reproduction. The ND1030 titanium diaphragm assembly, with its ellipsoidal suspension shape, exhibits a constant slope response from 1kHz to 18kHz with uniform smooth roll-off behavior. An edge-wound aluminum voice coil, wound on proprietary treated Nomex, completes the diaphragm assembly. Nomex shows a 30% higher value of tensile elongation at a working operative temperature (200°C) when compared to Kapton. This feature enables proper energy transfer control from the voice coil to the dome in real working conditions. Moreover, this proprietary former material is also suitable for use in higher moisture content environments. By careful use of elementary pieces of neodymium magnets, Eighteen Sound engineers have developed a powerful neodymium magnet assembly capable of reaching 18KGauss in the gap within a compact and lightweight structure.

Post a comment / review

0421T8M430 8ohm
0421M6N800 16 ohm
0421M8N800 8ohm
0421T8M430 8ohm
0421M6N800 16 ohm
0421M8N800 8ohm

Eighteen Sound ND1050

138.00 IT/piece
Supplied on order
Compression driver 18 Sound ND1050, 16 ohm, 1.0 inch exit 16 ohm

The ND1050 one inch exit high frequency compression driver is designed for high quality applications, where size is a critical issue. ND1050 high flux ultra compact magnetic assembly architecture, achieves the remarkable 1,9 Tesla value in the gap containing the external size in 75mm - 3 inches - making this HF driver a benchmark in its category. Equipped with Eighteen Sound proprietary Phase Plug architecture, the ultra compact ND1050 ensures a coherent wavefront at the horn entrance over all the working frequency range. The radial - tangerine phase plug design with short openings and high flare rate value assures low distortion and remarkable improvements in mid-high frequency reproduction. The transducer diaphragm assembly is composed of a titanium dome sandwiched to a proprietary treated polyester suspension. This design maintains low resonance and lowers the minimum crossover point value to 1.6kHz. An edge-wound aluminum voice coil, wounded on proprietary treated Nomex, completes diaphragm assembly. Thanks to its physical properties, the proprietary treated Nomex former shows 30% higher value of tensile elongation at working operative temperature (200°C) when compared to Kapton. Moreover, this material is suitable to work also in higher moisture contents environments. The ability to perform properly under inclement weather conditions is a key-point of the Eighteen Sound philosophy. The special treatment applied to the magnet and the top and back plates of the magnetic structure makes the driver more resistant to the corrosive effects of salts and oxidization than any other treatment used by other manufacturers.

Post a comment / review

0421T8M430 8ohm
0421M6N800 16 ohm
0421M8N800 8ohm
0421T6N500 16Ohm
0421T8M430 8ohm
0421M6N800 16 ohm
0421M8N800 8ohm
0421T6N500 16Ohm

Eighteen Sound ND1050

138.00 IT/piece
Processing in supply
Compression driver 18 Sound ND1050, 8 ohm, 1.0 inch exit 8 ohm

The ND1050 one inch exit high frequency compression driver is designed for high quality applications, where size is a critical issue. ND1050 high flux ultra compact magnetic assembly architecture, achieves the remarkable 1,9 Tesla value in the gap containing the external size in 75mm - 3 inches - making this HF driver a benchmark in its category. Equipped with Eighteen Sound proprietary Phase Plug architecture, the ultra compact ND1050 ensures a coherent wavefront at the horn entrance over all the working frequency range. The radial - tangerine phase plug design with short openings and high flare rate value assures low distortion and remarkable improvements in mid-high frequency reproduction. The transducer diaphragm assembly is composed of a titanium dome sandwiched to a proprietary treated polyester suspension. This design maintains low resonance and lowers the minimum crossover point value to 1.6kHz. An edge-wound aluminum voice coil, wounded on proprietary treated Nomex, completes diaphragm assembly. Thanks to its physical properties, the proprietary treated Nomex former shows 30% higher value of tensile elongation at working operative temperature (200°C) when compared to Kapton. Moreover, this material is suitable to work also in higher moisture contents environments. The ability to perform properly under inclement weather conditions is a key-point of the Eighteen Sound philosophy. The special treatment applied to the magnet and the top and back plates of the magnetic structure makes the driver more resistant to the corrosive effects of salts and oxidization than any other treatment used by other manufacturers.

Post a comment / review

0421T8M430 8ohm
0421M6N800 16 ohm
0421M8N800 8ohm
0421T6N500 16Ohm
0421T8N500 8Ohm
0421T8M430 8ohm
0421M6N800 16 ohm
0421M8N800 8ohm
0421T6N500 16Ohm
0421T8N500 8Ohm

Eighteen Sound ND1070

133.50 IT/piece
Supplied on order
Compression driver 18 Sound ND1070, 16 ohm, 1.0 inch exit 16 ohm

The ND1070 1-inch exit high frequency compression driver has been designed for use in high quality two-way audio systems. Equipped with Proprietary Phase Plug architecture, ND1070 shows high level manufacturing consistency and a smooth coherent wavefront at the horn entrance across the whole working frequency range. With its short openings and high flare rate value, this phase plug configuration assures low distortion and demonstrates remarkable improvements in mid-high frequency reproduction. The ND1070 diaphragm assembly is composed of a titanium dome sandwiched to a proprietary treated polyester suspension. This design maintains low resonance and lowers the minimum crossover point value to 1.6 kHz. An edge-wound aluminum voice coil wound on proprietary treated Nomex completes the diaphragm assembly. Nomex shows a 30% higher value of tensile elongation at a working operative temperature (200°C) when compared to Kapton. This feature enables proper energy transfer control from the voice coil to the dome in real working conditions. Moreover, this proprietary former material is also suitable for use in high moisture content environments. A copper ring on the pole piece reduces inductance above 10 kHz, improving phase and impedance linearization. By careful use of elementary pieces of neodymium magnets, Eighteen Sound engineers have developed a powerful neodymium magnet assembly capable of reaching 18KGauss in the gap within a compact and lightweight structure. The custom designed O-ring creates a tight seal between the plate and the cover assuring air chamber loading. Excellent heat dissipation and thermal exchange are guaranteed by the direct contact between the magnetic structure and the aluminum cover which leads to a lower power compression value. The ability to perform properly under inclement weather conditions is a key feature in Eighteen Sound philosophy. A special treatment has been applied to the magnet and the top and back plates of the magnetic structure making the driver more resistant to the corrosive effects of salts and oxidization. This treatment is more effective than any other treatment used by other manufacturers.

Post a comment / review

0421T8M430 8ohm
0421M6N800 16 ohm
0421M8N800 8ohm
0421T6N500 16Ohm
0421T8N500 8Ohm
0421T6M400 16 Ohm
0421T8M430 8ohm
0421M6N800 16 ohm
0421M8N800 8ohm
0421T6N500 16Ohm
0421T8N500 8Ohm
0421T6M400 16 Ohm

Eighteen Sound ND1070

133.50 IT/piece
Processing in supply
Compression driver 18 Sound ND1070, 8 ohm, 1.0 inch exit 8 ohm

The ND1070 1-inch exit high frequency compression driver has been designed for use in high quality two-way audio systems. Equipped with Proprietary Phase Plug architecture, ND1070 shows high level manufacturing consistency and a smooth coherent wavefront at the horn entrance across the whole working frequency range. With its short openings and high flare rate value, this phase plug configuration assures low distortion and demonstrates remarkable improvements in mid-high frequency reproduction. The ND1070 diaphragm assembly is composed of a titanium dome sandwiched to a proprietary treated polyester suspension. This design maintains low resonance and lowers the minimum crossover point value to 1.6 kHz. An edge-wound aluminum voice coil wound on proprietary treated Nomex completes the diaphragm assembly. Nomex shows a 30% higher value of tensile elongation at a working operative temperature (200°C) when compared to Kapton. This feature enables proper energy transfer control from the voice coil to the dome in real working conditions. Moreover, this proprietary former material is also suitable for use in high moisture content environments. A copper ring on the pole piece reduces inductance above 10 kHz, improving phase and impedance linearization. By careful use of elementary pieces of neodymium magnets, Eighteen Sound engineers have developed a powerful neodymium magnet assembly capable of reaching 18KGauss in the gap within a compact and lightweight structure. The custom designed O-ring creates a tight seal between the plate and the cover assuring air chamber loading. Excellent heat dissipation and thermal exchange are guaranteed by the direct contact between the magnetic structure and the aluminum cover which leads to a lower power compression value. The ability to perform properly under inclement weather conditions is a key feature in Eighteen Sound philosophy. A special treatment has been applied to the magnet and the top and back plates of the magnetic structure making the driver more resistant to the corrosive effects of salts and oxidization. This treatment is more effective than any other treatment used by other manufacturers.

Post a comment / review

0421T8M430 8ohm
0421M6N800 16 ohm
0421M8N800 8ohm
0421T6N500 16Ohm
0421T8N500 8Ohm
0421T6M400 16 Ohm
0421T8M400 8 Ohm
0421T8M430 8ohm
0421M6N800 16 ohm
0421M8N800 8ohm
0421T6N500 16Ohm
0421T8N500 8Ohm
0421T6M400 16 Ohm
0421T8M400 8 Ohm

Eighteen Sound ND1090

139.50 IT/piece
Supplied on order
Compression driver 18 Sound ND1090, 16 ohm, 1.0 inch exit 16 ohm

The ND1090 1 inch exit neodymium high frequency compression driver has been designed for situations where the highest quality is required. Equipped with unique Phase Plug architecture, the ND1090 has been designed to give high level manufacturing consistency and a smooth coherent wavefront at the horn entrance across the whole working frequency range. The phase plug short openings and high flare rate value assure low distortion, showing remarkable improvements in mid-high frequency reproduction. The ND1090 diaphragm assembly is composed of a titanium dome sandwiched to a proprietary treated polyester suspension. This design maintains low resonance and lowers the minimum crossover point value to 1.6kHz. An edge-wound aluminum voice coil, wound on proprietary treated Nomex, completes the diaphragm assembly. Nomex shows a 30% higher value of tensile elongation at a working operative temperature (200°C) when compared to Kapton. Moreover, this proprietary former material is also suitable for use in high moisture content environments. The powerful neodymium magnet assembly has been designed to obtain 20 KGauss in the gap giving major benefits in transient response. A copper ring on the pole piece reduces inductance above 10 kHz, improving phase and impedance linearization. The custom designed O-ring creates a tight seal between the plate and the cover assuring air chamber loading. Excellent heat dissipation and thermal exchange are guaranteed by the direct contact between the magnetic structure and the aluminum cover which leads to a lower power compression value. The ability to perform properly under inclement weather conditions is a key feature of the Eighteen Sound philosophy. Hence, in addition, a special treatment has been applied to the magnet and the top and back plates of the magnetic structure making the ND1090 driver more resistant to the corrosive effects of salts and oxidization. This treatment is more effective than any other treatment used by other manufacturers.

Post a comment / review

0421T8M430 8ohm
0421M6N800 16 ohm
0421M8N800 8ohm
0421T6N500 16Ohm
0421T8N500 8Ohm
0421T6M400 16 Ohm
0421T8M400 8 Ohm
0421T6N400 16 Ohm
0421T8M430 8ohm
0421M6N800 16 ohm
0421M8N800 8ohm
0421T6N500 16Ohm
0421T8N500 8Ohm
0421T6M400 16 Ohm
0421T8M400 8 Ohm
0421T6N400 16 Ohm

Eighteen Sound ND1090

139.50 IT/piece
Processing in supply
Compression driver 18 Sound ND1090, 8 ohm, 1.0 inch exit 8 ohm

The ND1090 1 inch exit neodymium high frequency compression driver has been designed for situations where the highest quality is required. Equipped with unique Phase Plug architecture, the ND1090 has been designed to give high level manufacturing consistency and a smooth coherent wavefront at the horn entrance across the whole working frequency range. The phase plug short openings and high flare rate value assure low distortion, showing remarkable improvements in mid-high frequency reproduction. The ND1090 diaphragm assembly is composed of a titanium dome sandwiched to a proprietary treated polyester suspension. This design maintains low resonance and lowers the minimum crossover point value to 1.6kHz. An edge-wound aluminum voice coil, wound on proprietary treated Nomex, completes the diaphragm assembly. Nomex shows a 30% higher value of tensile elongation at a working operative temperature (200°C) when compared to Kapton. Moreover, this proprietary former material is also suitable for use in high moisture content environments. The powerful neodymium magnet assembly has been designed to obtain 20 KGauss in the gap giving major benefits in transient response. A copper ring on the pole piece reduces inductance above 10 kHz, improving phase and impedance linearization. The custom designed O-ring creates a tight seal between the plate and the cover assuring air chamber loading. Excellent heat dissipation and thermal exchange are guaranteed by the direct contact between the magnetic structure and the aluminum cover which leads to a lower power compression value. The ability to perform properly under inclement weather conditions is a key feature of the Eighteen Sound philosophy. Hence, in addition, a special treatment has been applied to the magnet and the top and back plates of the magnetic structure making the ND1090 driver more resistant to the corrosive effects of salts and oxidization. This treatment is more effective than any other treatment used by other manufacturers.

Post a comment / review

0421T8M430 8ohm
0421M6N800 16 ohm
0421M8N800 8ohm
0421T6N500 16Ohm
0421T8N500 8Ohm
0421T6M400 16 Ohm
0421T8M400 8 Ohm
0421T6N400 16 Ohm
0421T8N400 8 Ohm
0421T8M430 8ohm
0421M6N800 16 ohm
0421M8N800 8ohm
0421T6N500 16Ohm
0421T8N500 8Ohm
0421T6M400 16 Ohm
0421T8M400 8 Ohm
0421T6N400 16 Ohm
0421T8N400 8 Ohm

Eighteen Sound ND1424BT

206.25 IT/piece
Supplied on order
Compression driver 18 Sound ND1424BT, 16 ohm, 1.4 inch exit 16 ohm

The ND1424BT 1.4" exit neodymium high frequency compression driver has been designed for high level sound systems application. The titanium diaphragm is produced in house and has been developed to assure unmatched transient response. A proprietary treated Nomex bended former edge-wound aluminum 60mm voice coil completes diaphragm assembly. It has been made joining the proprietary treated Nomex former directly to the titanium dome through its upper bend edge. In comparison with usual straight former joint, the driver design assures extended frequency energy transfer for improved response linearity and unparallel reliability. This feature allows to keep proper motion control of the dome in real working conditions. Thanks to its physical properties, the proprietary treated Nomex former shows 30% higher value of tensile elongation at working operative temperature (200°C) when compared to Kapton. Moreover, this material is suitable to work also in higher moisture contents environments. Equipped with Proprietary Phase Plug 3P architecture, the ND1424BT has been designed to give smooth coherent wavefront in the horn entrance in all working frequency range and high level manufacturing consistency. The phase plug with its short openings and high flare rate value assures low distortion and remarkable improvements in mid-high frequency reproduction. Another big innovation in ND1424BT consists in the magnetic complex architecture. Through careful use of elementary pieces of neodymium magnets, Eighteen Sound engineers have developed a powerful neodymium magnet assembly able to reach 19KGauss in the gap in compact and lightweight structure. The motor structure, throughout the precisely coherent phase plug with 3 circumferential slots and copper ring on the pole piece, reduces inductance effects and distortion. The custom designed O-ring creates a tight seal between the plate and the cover assuring air chamber loading. Excellent heat dissipation and thermal exchange are guaranteed by the direct contact between the magnetic structure and the aluminum cover that allows to obtain a lower power compression value.

Post a comment / review

0421T8M430 8ohm
0421M6N800 16 ohm
0421M8N800 8ohm
0421T6N500 16Ohm
0421T8N500 8Ohm
0421T6M400 16 Ohm
0421T8M400 8 Ohm
0421T6N400 16 Ohm
0421T8N400 8 Ohm
0422T6M900 16ohm
0421T8M430 8ohm
0421M6N800 16 ohm
0421M8N800 8ohm
0421T6N500 16Ohm
0421T8N500 8Ohm
0421T6M400 16 Ohm
0421T8M400 8 Ohm
0421T6N400 16 Ohm
0421T8N400 8 Ohm
0422T6M900 16ohm

Eighteen Sound ND1424BT

206.25 IT/piece
Processing in supply
Compression driver 18 Sound ND1424BT, 8 ohm, 1.4 inch exit 8 ohm

The ND1424BT 1.4" exit neodymium high frequency compression driver has been designed for high level sound systems application. The titanium diaphragm is produced in house and has been developed to assure unmatched transient response. A proprietary treated Nomex bended former edge-wound aluminum 60mm voice coil completes diaphragm assembly. It has been made joining the proprietary treated Nomex former directly to the titanium dome through its upper bend edge. In comparison with usual straight former joint, the driver design assures extended frequency energy transfer for improved response linearity and unparallel reliability. This feature allows to keep proper motion control of the dome in real working conditions. Thanks to its physical properties, the proprietary treated Nomex former shows 30% higher value of tensile elongation at working operative temperature (200°C) when compared to Kapton. Moreover, this material is suitable to work also in higher moisture contents environments. Equipped with Proprietary Phase Plug 3P architecture, the ND1424BT has been designed to give smooth coherent wavefront in the horn entrance in all working frequency range and high level manufacturing consistency. The phase plug with its short openings and high flare rate value assures low distortion and remarkable improvements in mid-high frequency reproduction. Another big innovation in ND1424BT consists in the magnetic complex architecture. Through careful use of elementary pieces of neodymium magnets, Eighteen Sound engineers have developed a powerful neodymium magnet assembly able to reach 19KGauss in the gap in compact and lightweight structure. The motor structure, throughout the precisely coherent phase plug with 3 circumferential slots and copper ring on the pole piece, reduces inductance effects and distortion. The custom designed O-ring creates a tight seal between the plate and the cover assuring air chamber loading. Excellent heat dissipation and thermal exchange are guaranteed by the direct contact between the magnetic structure and the aluminum cover that allows to obtain a lower power compression value.

Post a comment / review

0421T8M430 8ohm
0421M6N800 16 ohm
0421M8N800 8ohm
0421T6N500 16Ohm
0421T8N500 8Ohm
0421T6M400 16 Ohm
0421T8M400 8 Ohm
0421T6N400 16 Ohm
0421T8N400 8 Ohm
0422T6M900 16ohm
0422T8M900 8ohm
0421T8M430 8ohm
0421M6N800 16 ohm
0421M8N800 8ohm
0421T6N500 16Ohm
0421T8N500 8Ohm
0421T6M400 16 Ohm
0421T8M400 8 Ohm
0421T6N400 16 Ohm
0421T8N400 8 Ohm
0422T6M900 16ohm
0422T8M900 8ohm

Eighteen Sound ND1460

232.50 IT/piece
Supplied on order
Compression driver 18 Sound ND1460, 16 ohm, 1.4 inch exit 16 ohm

The ND1460 1.4 inch exit neodymium high frequency compression driver has been designed for use in high quality sound systems. The pure titanium diaphragm is produced in house and has been developed to assure unmatched transient response. The diaphragm assembly is made by joining the former directly to the titanium dome using its upper bend edge. In comparison with a usual straight former joint, the driver design assures extended frequency energy transfer giving improved response linearity and unparallel reliability. This feature facilitates proper motion control of the dome in real working conditions. A proprietary treated Nomex former is used as Nomex shows a 30% higher value of tensile elongation at a working operative temperature (200°C) when compared to Kapton. Moreover, this proprietary former material is also suitable for use in high moisture content environments. By carefully using elementary pieces of neodymium magnets, Eighteen Sound engineers have developed a powerful neodymium magnet assembly capable of reaching 19KGauss in the gap in compact and lightweight structures. The motor structure, throughout the precisely coherent phase plug with 3 circumferential slots and copper ring on the pole piece, reduces inductance effects and distortion. Four top plate air ducts have been designed to act as a loading chamber for the diaphragm, implementing mid band distortion and response figures. The custom designed O-ring creates a tight seal between the plate and the cover assuring air chamber loading. Excellent heat dissipation and thermal exchange are guaranteed by the direct contact between the magnetic structure and the aluminum cover which leads to a lower power compression value. The ability of equipment to perform properly under inclement weather conditions is a key feature of the Eighteen Sound philosophy. Hence, a special treatment is applied to the magnet and the top and back plates of the magnetic structure which increases the ND1460 resistance to the corrosive effects of salts and oxidization. This treatment is more effective than any other treatment in use today.

Post a comment / review

0421T8M430 8ohm
0421M6N800 16 ohm
0421M8N800 8ohm
0421T6N500 16Ohm
0421T8N500 8Ohm
0421T6M400 16 Ohm
0421T8M400 8 Ohm
0421T6N400 16 Ohm
0421T8N400 8 Ohm
0422T6M900 16ohm
0422T8M900 8ohm
042106N200 16 Ohm
0421T8M430 8ohm
0421M6N800 16 ohm
0421M8N800 8ohm
0421T6N500 16Ohm
0421T8N500 8Ohm
0421T6M400 16 Ohm
0421T8M400 8 Ohm
0421T6N400 16 Ohm
0421T8N400 8 Ohm
0422T6M900 16ohm
0422T8M900 8ohm
042106N200 16 Ohm

Eighteen Sound ND1460

232.50 IT/piece
Processing in supply
Compression driver 18 Sound ND1460, 8 ohm, 1.4 inch exit 8 ohm

The ND1460 1.4 inch exit neodymium high frequency compression driver has been designed for use in high quality sound systems. The pure titanium diaphragm is produced in house and has been developed to assure unmatched transient response. The diaphragm assembly is made by joining the former directly to the titanium dome using its upper bend edge. In comparison with a usual straight former joint, the driver design assures extended frequency energy transfer giving improved response linearity and unparallel reliability. This feature facilitates proper motion control of the dome in real working conditions. A proprietary treated Nomex former is used as Nomex shows a 30% higher value of tensile elongation at a working operative temperature (200°C) when compared to Kapton. Moreover, this proprietary former material is also suitable for use in high moisture content environments. By carefully using elementary pieces of neodymium magnets, Eighteen Sound engineers have developed a powerful neodymium magnet assembly capable of reaching 19KGauss in the gap in compact and lightweight structures. The motor structure, throughout the precisely coherent phase plug with 3 circumferential slots and copper ring on the pole piece, reduces inductance effects and distortion. Four top plate air ducts have been designed to act as a loading chamber for the diaphragm, implementing mid band distortion and response figures. The custom designed O-ring creates a tight seal between the plate and the cover assuring air chamber loading. Excellent heat dissipation and thermal exchange are guaranteed by the direct contact between the magnetic structure and the aluminum cover which leads to a lower power compression value. The ability of equipment to perform properly under inclement weather conditions is a key feature of the Eighteen Sound philosophy. Hence, a special treatment is applied to the magnet and the top and back plates of the magnetic structure which increases the ND1460 resistance to the corrosive effects of salts and oxidization. This treatment is more effective than any other treatment in use today.

Post a comment / review

0421T8M430 8ohm
0421M6N800 16 ohm
0421M8N800 8ohm
0421T6N500 16Ohm
0421T8N500 8Ohm
0421T6M400 16 Ohm
0421T8M400 8 Ohm
0421T6N400 16 Ohm
0421T8N400 8 Ohm
0422T6M900 16ohm
0422T8M900 8ohm
042106N200 16 Ohm
042108N200 8 Ohm
0421T8M430 8ohm
0421M6N800 16 ohm
0421M8N800 8ohm
0421T6N500 16Ohm
0421T8N500 8Ohm
0421T6M400 16 Ohm
0421T8M400 8 Ohm
0421T6N400 16 Ohm
0421T8N400 8 Ohm
0422T6M900 16ohm
0422T8M900 8ohm
042106N200 16 Ohm
042108N200 8 Ohm

Eighteen Sound ND1460A

238.50 IT/piece
Supplied on order
Compression driver 18 Sound ND1460A, 16 ohm, 1.4 inch exit 16 ohm

The ND1460A 1.4 inch exit neodymium HF compression driver has been designed for high level sound systems application. The diaphragm assembly is composed by an aluminum dome sandwiched to a proprietary treated polyester suspension. This design maintains low resonance and lowers the minimum crossover point value at 800Hz. The composite diaphragm assembly is made by an aluminum dome strongly joined to the PEN suspension, in order to assure unmatched transient response. The lower density of the aluminum and PEN structure permits higher levels of sensitivity, especially in the mid-high frequency range. A bended former edge-wound aluminum 75mm voice coil completes the diaphragm assembly. The proprietary treated Nomex former material shows 30% higher value of tensile elongation at working operative temperature (200°C) when compared to Kapton. Moreover, Nomex is suitable to work also in higher moisture contents environments. The bended former is jointed in a sandwich configuration between PEN suspension and the aluminum dome, assuring extended frequency energy transfer for improved response linearity and unparallel reliability. Through careful use of elementary pieces of neodymium magnets, Eighteen Sound engineers have developed a powerful neodymium magnet assembly able to reach 19 KGauss in the gap in a compact and lightweight structure. The motor structure, throughout the precisely coherent phase plug with 3 circumferential slots and copper ring on the pole piece, reduces inductance effects and distortion. Four top plate air ducts were designed to act as a loading chamber for the diaphragm, implementing mid band distortion and response figures. The custom designed O-ring creates a tight seal between the plate and the cover assuring air chamber loading. Excellent heat dissipation and thermal exchange are guaranteed by the direct contact between the magnetic structure and the aluminum cover that allows to obtain a lower power compression value. The ability to perform properly under inclement weather conditions is a key-point of Eighteen Sound philosophy. The special coating applied to the magnet and the top and back plates of the magnetic structure makes the ND1460A compression driver resistant to the corrosive effects of salts and oxidization.

Post a comment / review

0421T8M430 8ohm
0421M6N800 16 ohm
0421M8N800 8ohm
0421T6N500 16Ohm
0421T8N500 8Ohm
0421T6M400 16 Ohm
0421T8M400 8 Ohm
0421T6N400 16 Ohm
0421T8N400 8 Ohm
0422T6M900 16ohm
0422T8M900 8ohm
042106N200 16 Ohm
042108N200 8 Ohm
0422A6M600 16ohm
0421T8M430 8ohm
0421M6N800 16 ohm
0421M8N800 8ohm
0421T6N500 16Ohm
0421T8N500 8Ohm
0421T6M400 16 Ohm
0421T8M400 8 Ohm
0421T6N400 16 Ohm
0421T8N400 8 Ohm
0422T6M900 16ohm
0422T8M900 8ohm
042106N200 16 Ohm
042108N200 8 Ohm
0422A6M600 16ohm

Eighteen Sound ND1460A

238.50 IT/piece
Processing in supply
Compression driver 18 Sound ND1460A, 8 ohm, 1.4 inch exit 8 ohm

The ND1460A 1.4 inch exit neodymium HF compression driver has been designed for high level sound systems application. The diaphragm assembly is composed by an aluminum dome sandwiched to a proprietary treated polyester suspension. This design maintains low resonance and lowers the minimum crossover point value at 800Hz. The composite diaphragm assembly is made by an aluminum dome strongly joined to the PEN suspension, in order to assure unmatched transient response. The lower density of the aluminum and PEN structure permits higher levels of sensitivity, especially in the mid-high frequency range. A bended former edge-wound aluminum 75mm voice coil completes the diaphragm assembly. The proprietary treated Nomex former material shows 30% higher value of tensile elongation at working operative temperature (200°C) when compared to Kapton. Moreover, Nomex is suitable to work also in higher moisture contents environments. The bended former is jointed in a sandwich configuration between PEN suspension and the aluminum dome, assuring extended frequency energy transfer for improved response linearity and unparallel reliability. Through careful use of elementary pieces of neodymium magnets, Eighteen Sound engineers have developed a powerful neodymium magnet assembly able to reach 19 KGauss in the gap in a compact and lightweight structure. The motor structure, throughout the precisely coherent phase plug with 3 circumferential slots and copper ring on the pole piece, reduces inductance effects and distortion. Four top plate air ducts were designed to act as a loading chamber for the diaphragm, implementing mid band distortion and response figures. The custom designed O-ring creates a tight seal between the plate and the cover assuring air chamber loading. Excellent heat dissipation and thermal exchange are guaranteed by the direct contact between the magnetic structure and the aluminum cover that allows to obtain a lower power compression value. The ability to perform properly under inclement weather conditions is a key-point of Eighteen Sound philosophy. The special coating applied to the magnet and the top and back plates of the magnetic structure makes the ND1460A compression driver resistant to the corrosive effects of salts and oxidization.

Post a comment / review

0421T8M430 8ohm
0421M6N800 16 ohm
0421M8N800 8ohm
0421T6N500 16Ohm
0421T8N500 8Ohm
0421T6M400 16 Ohm
0421T8M400 8 Ohm
0421T6N400 16 Ohm
0421T8N400 8 Ohm
0422T6M900 16ohm
0422T8M900 8ohm
042106N200 16 Ohm
042108N200 8 Ohm
0422A6M600 16ohm
0422A8M600 8ohm
0421T8M430 8ohm
0421M6N800 16 ohm
0421M8N800 8ohm
0421T6N500 16Ohm
0421T8N500 8Ohm
0421T6M400 16 Ohm
0421T8M400 8 Ohm
0421T6N400 16 Ohm
0421T8N400 8 Ohm
0422T6M900 16ohm
0422T8M900 8ohm
042106N200 16 Ohm
042108N200 8 Ohm
0422A6M600 16ohm
0422A8M600 8ohm

Items 1 to 15 of 32 total

per page
Set Descending Direction
Page:
  1. 1
  2. 2
  3. 3


En poursuivant votre navigation sur ce site, vous acceptez l’utilisation de Cookies ou autres traceurs pour réaliser des statistiques de visites. En savoir plus
En poursuivant votre navigation sur ce site, vous acceptez l’utilisation de Cookies ou autres traceurs pour réaliser des statistiques de visites. En savoir plus