Haut-parleurs graves

Items 1 to 15 of 31 total

per page
Set Descending Direction
Page:
  1. 1
  2. 2
  3. 3


Eighteen Sound 10NW650

Supplied on quotation
Speaker 18 Sound 10NW650, 16 ohm, 10 inch

96 dB SPL 1W / 1m average sensitivity 65 mm (2.5 in) aluminum edgewound voice coil 600 W program power handling High excursion design for low frequency clarity and punch Weather protected cone and coated plates for outdoor usage Ultra lightweight design Suitable for line array applications and multiway systems

Post a comment / review

Eighteen Sound 10NW650

Supplied on quotation
Speaker 18 Sound 10NW650, 4 ohm, 10 inch

96 dB SPL 1W / 1m average sensitivity 65 mm (2.5 in) aluminum edgewound voice coil 600 W program power handling High excursion design for low frequency clarity and punch Weather protected cone and coated plates for outdoor usage Ultra lightweight design Suitable for line array applications and multiway systems

Post a comment / review

Eighteen Sound 10NW650

Supplied on quotation
Speaker 18 Sound 10NW650, 8 ohm, 10 inch

96 dB SPL 1W / 1m average sensitivity 65 mm (2.5 in) aluminum edgewound voice coil 600 W program power handling High excursion design for low frequency clarity and punch Weather protected cone and coated plates for outdoor usage Ultra lightweight design Suitable for line array applications and multiway systems

Post a comment / review

Eighteen Sound 10W400

Archived
Speaker 18 Sound 10W400, 8 ohm, 10 inch 8 ohm

The 10W400 is a low frequency driver designed to satisfy the need for a 10" ferrite loudspeaker combining excellent linearity with good sensitivity and power handling characteristics. The transducer is primarily recommended for compact bass reflex systems in enclosures as small as 25 lt. The paper curvilinear cone is carried by a dampened linen, double half-roll front suspension to control vibration modes. The 8 mm Xmax ensures good travel control and linear excursion. The 50 mm diameter state-of-the-art, copper wire voice coil employs same technology fitted to our top-of-the-range models, that is our Interleaved Sandwich Voice coil (ISV) technology. A high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil. This results in an extremely linear motor assembly which, in conjunction with the highly advanced design of the magnetic structure, provides a high force factor or BL. Another feature of our products, retained in the 10W400 are the fine air channels between the chassis back plate and the top plate of the magnet, which draw heated air out from the voice coil gap and dissipate the energy through the chassis casting. The top and back plates of the magnet assembly have been designed to optimise flux density and BL factor in the air gap using our in-house FEA CAD facility.

Post a comment / review

Eighteen Sound 12ND930

231.00 IT/piece
Processing in supply
Speaker 18 Sound 12ND930, 8 ohm, 12 inch 8 ohm

The 12ND930 is a high power, high output, low frequency woofer meeting the most stringent requirements in high quality professional transducers. The high level of performance and sound quality have been achieved by exploiting the most advanced technologies available today. Thanks to its versatility, the 12ND930 can be used in two-way compact reflex enclosures with a 1.4" compression driver, in multi-way systems and in high loading sub woofers as small as 50 lt (compact reflex, band-pass and hornloaded configurations). The neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange, since the external magnet configuration is considerably more efficient than traditional under-pole magnet topology. This results in high levels of force factor and power handling with an optimum power to weight ratio. The direct contact between the large heat sink and the basket, together with the magnetic structure, represents a fundamental improvement in thermal connection and heat dissipation. The result is increased power handling capabilities and lower power compression. The curvilinear cone profile, created with a special high strength wood pulp, has been designed to achieve the best possible linearity within its frequency range. The cone surround in linen material is highly resistant to aging and fatigue. The in-house developed cone treatment is a humidity repellent and significant dampens bell mode resonance. The 12ND930 employs our Interleaved Sandwich Voice coil (ISV) in which a high strength fiberfiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil. The final result is an extremely linear motor assembly with a reduced tendency for eccentric behavior when driven hard. The already low distortion and sound quality are further improved by Double Demodulating Rings (DDR), that flatten impedance and phase figures with a constant power transfer. A special coating applied to both the top and back plates makes the 12ND930 far more resistant to the corrosive effects of salts and oxidization.

Post a comment / review

Eighteen Sound 12NLW9300

279.75 IT/piece
In stock
Speaker 18 Sound 12NLW9300, 8 ohm, 12 inch 8 ohm

The 12NLW9300 is a high performance low frequency neodymium loudspeaker. It is intended mainly as woofer for two way systems and works extremely well in compact vented enclosures (30 - 70 lit). The neo magnet external assembly assures high flux concentration, low power compression and excellent heat exchange. The external magnet configuration is considerably more efficient than the traditional under-pole magnet topology. This allows to obtain high levels of force factor and power handling with a power to weight ratio at the upper level. The heatsink has been specifically studied according to F.E.A. simulators, improving the necessary heat transfer to the dissipative structure. The direct contact between the heat sink and the specially designed basket, together with the magnetic structure, represents a fundamental improvement in heat dissipation, increasing power handling capabilities and lowering power compression figure. A state-of-the-art Interleaved Sandwich Voice coil (ISV) voice coil provides high levels of thermal stability and durability. The ISV technology is based on a high strength fiberglass former with half the coil wound on the outside and half on the inside ensuring uniform thermal dissipation on both sides, bonded together using unique high- temperature resin adhesives achieving a balanced and solid linear motor unit. The 12NLW9300 performances are further improved by the use of Double Demodulation Rings (DDR), designed to reduce dramatically the intermodulation and harmonic distortion whilst improving the transient response. The 12NLW9300 design features a dedicated exclusive Carbon fibre reinforced straight ribbed cone; the pulp formulation contains special damping fibres and is further treated in-house with a proprietary resin compound in order to increase the cone bend performances 5 times more than traditional celluloses pulp and twice than glass fibre added pulps. The result is a very linear piston action across the entire working range minimizing the destroying breaking modes. The coating of both the face and back plates is far more resistant to the corrosive effects of salts and oxidization than any other treatment normally in use.

Post a comment / review

Eighteen Sound 12W500

121.50 IT/piece
Supplied on order
Speaker 18 Sound 12W500, 4 ohm, 12 inch 4 ohm

The 12W500 is a 500W program low frequency driver designed to satisfy the need for a 12" loudspeaker which combines excellent linearity with good sensitivity and power handling characteristics. It is primarily intended for compact bass reflex applications in enclosures as small as 50 lt, typically for two-way systems in combination with 1" compression driver. 50 lt, typically for two-way systems in combination with 1" compression driver. The high quality paper cone has a smooth, curvilinear profile design that eliminates bell-mode resonances within the intended frequency range. This is carried by a specially treated, dampened double half-roll linen suspension which has been designed to control excursion maintaining the piston action linearity. The 12W500 employs the Interleaved Sandwich Voice coil (ISV) technology, in which a high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil. This results in an extremely linear motor assembly with a reduced tendency for eccentric behavior when driven hard. Voice coil cooling is achieved by incorporating airways between the chassis back plate and the top plate of the magnet, allowing heated air from the voice coil and gap to be channeled away and dissipated by the chassis basket.

Post a comment / review

Eighteen Sound 12W500

121.50 IT/piece
Processing in supply
Speaker 18 Sound 12W500, 8 ohm, 12 inch 8 ohm

The 12W500 is a 500W program low frequency driver designed to satisfy the need for a 12" loudspeaker which combines excellent linearity with good sensitivity and power handling characteristics. It is primarily intended for compact bass reflex applications in enclosures as small as 50 lt, typically for two-way systems in combination with 1" compression driver. 50 lt, typically for two-way systems in combination with 1" compression driver. The high quality paper cone has a smooth, curvilinear profile design that eliminates bell-mode resonances within the intended frequency range. This is carried by a specially treated, dampened double half-roll linen suspension which has been designed to control excursion maintaining the piston action linearity. The 12W500 employs the Interleaved Sandwich Voice coil (ISV) technology, in which a high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil. This results in an extremely linear motor assembly with a reduced tendency for eccentric behavior when driven hard. Voice coil cooling is achieved by incorporating airways between the chassis back plate and the top plate of the magnet, allowing heated air from the voice coil and gap to be channeled away and dissipated by the chassis basket.

Post a comment / review

Eighteen Sound 12W700

171.75 IT/piece
Processing in supply
Speaker 18 Sound 12W700, 8 ohm, 12 inch 8 ohm

The 12W700 meets the specific market requirement for a loudspeaker which combines the excellent linearity, good efficiency and high power handling of the 15W700 model but in a 12 inch (300mm) chassis for use in more compact systems. It is primarily intended for application in compact reflex and band-pass enclosures but can also be used for horn loaded configurations. The ribbed curvilinear paper cone has been made from a special high strength woodpulp designed to achieve the best possible linearity within its intended frequency range and to control bell-mode resonances around the cone circumference. The cone is carried by an unusually deep profile, triple roll suspension made from a polycotton material which is more resistant to aging and fatigue than traditional cotton-based ones. The 75 mm (3 inch) diameter voice coil employs the Interleaved Sandwich Voice coil (ISV) technology, in which a high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil. This results in an extremely linear motor assembly with a reduced tendency for eccentric behavior when driven hard. The magnetic structure has been optimized using FEACAD resource to maximize the flux density in the voice coil gap. Voice coil cooling has been achieved by incorporating airways between the chassis back plate and the top plate of the magnet, allowing heated air from the voice coil and gap to be channeled away and dissipated by the chassis basket. Due to the increasing use of audio systems at outdoor events, the ability to perform in adverse weather conditions or in high-humidity areas is an essential feature of the 12W700. This has been achieved using an exclusive cone and magnet plate treatment process which increases resistance to corrosion and renders the cone water repellent.

Post a comment / review

Eighteen Sound 12W750

174.75 IT/piece
Supplied on order
Speaker 18 Sound 12W750, 16 ohm, 12 inch

97 dB SPL 1W / 1m average sensitivity 75 mm (3 in) Interleaved Sandwich Voice coil (ISV) 1200 W program power handling Long excursion, linear travel suspension design Weather protected cone and plates for outdoor use Generous low frequency output make it suitable for 2-way systems and subwoofer applications

Post a comment / review

Eighteen Sound 12W750

174.75 IT/piece
Supplied on order
Speaker 18 Sound 12W750, 4 ohm, 12 inch

97 dB SPL 1W / 1m average sensitivity 75 mm (3 in) Interleaved Sandwich Voice coil (ISV) 1200 W program power handling Long excursion, linear travel suspension design Weather protected cone and plates for outdoor use Generous low frequency output make it suitable for 2-way systems and subwoofer applications

Post a comment / review

Eighteen Sound 12W750

174.75 IT/piece
Supplied on order
Speaker 18 Sound 12W750, 8 ohm, 12 inch

97 dB SPL 1W / 1m average sensitivity 75 mm (3 in) Interleaved Sandwich Voice coil (ISV) 1200 W program power handling Long excursion, linear travel suspension design Weather protected cone and plates for outdoor use Generous low frequency output make it suitable for 2-way systems and subwoofer applications

Post a comment / review

Eighteen Sound 15ND830

222.75 IT/piece
Supplied on order
Speaker 18 Sound 15ND830, 4 ohm, 15 inch 4 ohm

Thanks to its versatility, the 15ND830 can be used in 2-way compact reflex enclosures and reflex / band pass subwoofers. The neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange, since the external magnet configuration is considerably more efficient than traditional under-pole magnet topology. This results in high levels of force factor and power handling with an optimum power to weight ratio. The direct contact between the heat sink and basket, together with the magnetic structure, represents a fundamental improvement in thermal connection and heat dissipation. Hence, power handling capabilities are increased and power compression lowered. The deep profile curvilinear cone, created from a special high strength wood pulp, has been designed to achieve the best possible linearity within its frequency range. The cone surround made from a linen material is highly resistant to aging and fatigue. The in-house developed cone treatment is fully water repellent and also gives a significant degree of rigidity to the cone. The 75mm Interleaved Sandwich Voice coil (ISV) assembly is wound on a strong fiberglas former which improves force transmission and thermal power handling. A special coating applied to both the top and back plates makes the 15ND830 far more resistant to the corrosive effects of salts and oxidization.

Post a comment / review

Eighteen Sound 15ND830

222.75 IT/piece
Supplied on order
Speaker 18 Sound 15ND830, 8 ohm, 15 inch 8 ohm

Thanks to its versatility, the 15ND830 can be used in 2-way compact reflex enclosures and reflex / band pass subwoofers. The neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange, since the external magnet configuration is considerably more efficient than traditional under-pole magnet topology. This results in high levels of force factor and power handling with an optimum power to weight ratio. The direct contact between the heat sink and basket, together with the magnetic structure, represents a fundamental improvement in thermal connection and heat dissipation. Hence, power handling capabilities are increased and power compression lowered. The deep profile curvilinear cone, created from a special high strength wood pulp, has been designed to achieve the best possible linearity within its frequency range. The cone surround made from a linen material is highly resistant to aging and fatigue. The in-house developed cone treatment is fully water repellent and also gives a significant degree of rigidity to the cone. The 75mm Interleaved Sandwich Voice coil (ISV) assembly is wound on a strong fiberglas former which improves force transmission and thermal power handling. A special coating applied to both the top and back plates makes the 15ND830 far more resistant to the corrosive effects of salts and oxidization.

Post a comment / review

Eighteen Sound 15NLW9300

294.00 IT/piece
Supplied on order
Speaker 18 Sound 15NLW9300, 8 ohm, 15 inch 8 ohm

The 15NLW9300 is a low frequency loudspeaker which sets a new industry standard in 15" (380mm) neodymium 4" voice coil high performance transducers. The design has evolved from an extensive R&D program carried out at Eighteen Sound, providing clean, undistorted LF reproduction at very high SPL without damages. The 15NLW9300 is intended mainly as woofer for studio monitoring or multiway systems applications in extremely compact vented enclosures (65-130lit). This make it ideal for touring application including indoor or outdoor concert reinforcement systems. Thanks to improved speaker design specifications and use of high grade materials it is the ideal transducer for touring applications or fixed installations. The neo magnet assembly assures high flux concentration, low power compression and excellent heat exchange, resulting in high levels of force factor and power handling with an optimum power to weight ratio. The heatsink has been specifically studied using F.E.A. simulators and the necessary heat transfer to the dissipative structure has been improved. The direct contact between the heatsink and the basket represents a fundamental improvement in heat dissipation, increasing power handling capabilities and lowering the power compression figure. The 15NLW9300 features a dedicated exclusive carbon fibre reinforced straight ribbed cone, with a specific pulp formulation containing damping fibres. The membrane is then treated in-house with a proprietary resin mix in order to increase the cone bend performances, up to 6 times better if compared with traditional celluloses pulp, twice than glass fibre added pulps. The results is a very linear piston action across the entire working range avoiding the destroying breaking modes. The cone treatment make the 15NLW9300 suitable for outdoor application. The suspension system has been designed to provide symmetric large signal behaviour throughout the whole working range, providing low harmonic distortion at different excitation levels. The performances are further improved by the proprietary Double Demodulating Rings technology (DDR), designed to reduce dramatically the intermodulation and harmonic distortion whilst improving the transient response. The state-of-the-art 100mm (4in) Interleaved Sandwich Voice coil (ISV) provides high levels of thermal stability and durability.

Post a comment / review

Items 1 to 15 of 31 total

per page
Set Descending Direction
Page:
  1. 1
  2. 2
  3. 3


En poursuivant votre navigation sur ce site, vous acceptez l’utilisation de Cookies ou autres traceurs pour réaliser des statistiques de visites. En savoir plus
En poursuivant votre navigation sur ce site, vous acceptez l’utilisation de Cookies ou autres traceurs pour réaliser des statistiques de visites. En savoir plus