Speaker Audax AM130G0, 8 ohm, 152/136 mm
|
Audax |
AM130G0 |
AM130G0-8 |
Cone driver |
Sold by piece |
|
|
Brand Audax |
Model AM130G0 |
TLHP code AM130G0-8 |
||
|
Product type Cone driver |
Sales packaging Sold by Piece |
|
||
-
Non resonant die as chassis
High loss rubber surround
High temperature voice coil
Nominal impedance: 8 ohms
Resonance: 55.06 Hz
Power handling (IEC): 50 W
Sensitivity: 87.2 dB
Resistance (DC): 6.39 ohms
Inductance: 0.71 mH
Xmax: 2.6 mm
Qms: 2.48
Qes: 0.47
Qts: 0.40
Vas: 9.74 l
Voice coil diam: 25 mm
Voice coil length: 11.2 mm
Former: kapton
Layer(s): 1
Wire type: flat
Force factor: 6.27 NA
Moving mass: 8.36 gr
Cone material: coated paper
Suspension: rubber
Chassis: die cast
Total mass: 1.2 kg
General |
|
| Product type | Cone driver |
| Brand | Audax |
| Reference | AM130G0 |
Informations |
|
| Nominal impedance | 8 ohm |
| Dimensional category | 5.5 inch, 6 inch |
| Frequency coverage type | Low |
| Manufacturer sensitivity | 87.2 dB |
| Calculated sensitivity | 87.22 dB |
| Nominal power handling | 50 W |
Fundamental parameters |
|
| Mms | 8.36 gr |
| Le | 0.71 mH |
| Re | 6.39 ohm |
| BL | 6.27 T.m |
Small signal parameters |
|
| Fs | 55 Hz |
| Qes | 0.47 |
| Qms | 2.48 |
| Qts | 0.4 |
| Vas | 9.74 L |
Datas |
|
| Xmax | ±2.6 mm |
| EBP | 117 Hz |
| Fs / Qts | 138 Hz |
| Vas * Qts² | 1.56 L |
| Calculated efficiency | 0.34 % |
| Weight | ~1.2 kg |
| Magnetically shielded | Yes |
Dimensions |
|
| Voice coil diameter | 1 inch |
| Winding depth | 11.2 mm |
| External dimensions | 136 | 152 mm |
| Baffle cutout diameter | 118 mm |
| Depth | 84.5 mm |
| Front thickness | 7 mm |
| Depth after front | 77.5 mm |
Shape & Materials |
|
| Front chape | Non cylindrical |
| Magnet type | Ferrite |
| Basket masterial | Aluminium |
| Surround shape | One roll |
| Surround material | Rubber |
Question about Audax AM130G0-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Informations Audax AM130G0-8
High loss rubber surround
High temperature voice coil
Nominal impedance: 8 ohms
Resonance: 55.06 Hz
Power handling (IEC): 50 W
Sensitivity: 87.2 dB
Resistance (DC): 6.39 ohms
Inductance: 0.71 mH
Xmax: 2.6 mm
Qms: 2.48
Qes: 0.47
Qts: 0.40
Vas: 9.74 l
Voice coil diam: 25 mm
Voice coil length: 11.2 mm
Former: kapton
Layer(s): 1
Wire type: flat
Force factor: 6.27 NA
Moving mass: 8.36 gr
Cone material: coated paper
Suspension: rubber
Chassis: die cast
Total mass: 1.2 kg
Name Speaker Audax AM130G0, 8 ohm, 152/136 mm
SKU AM130G0-8
Price € 83.64 69.7
Availability In stock
Buy Speaker Audax AM130G0, 8 ohm, 152/136 mm
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes Audax AM130G0-8
SPL vs Impedance measure
Dimensions
Garantie
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.
