Coaxial compression driver BMS 4592ND, 8+8 ohm, 2 inch exit
|
BMS |
4592ND |
4592-8+8 |
BMS-4592-8+8 |
Coaxial compression driver |
Sold by piece |
|
|
Brand BMS |
Model 4592ND |
TLHP code 4592-8+8 |
Manufacturer code BMS-4592-8+8 |
||
|
Product type Coaxial compression driver |
Sales packaging Sold by Piece |
|
|||
This product is in the process of supply to be in stock.
Reserved on order
Next TLHP reception estimated between Sep 26, 2024 and Oct 3, 2024
-
Extended Bandwidth (300 - 22000 Hz)
Neodymium Magnet Assembly
With two subsystems in one, each Driver covers a smaller Frequency Range for increased Power Handling, high Dynamic and extremely low Distortion
Excellent Phase Coherence
Perfect Time Alignment without Problems of Multi-Source Interference
Ultra light Weight
The patented design of the BMS 4592 is a result of extensive
dedicated research and development providing dramatic improvement
in dynamic response, clarity and transparency. The BMS annular midrange diaphragm
covers the frequency range between 300 and 7000 Hz with a smooth, linear response.
The large diaphragm excursion of max. + / - 0,8 mm results in high output and increased power handling up to 1300 W peak.
The ultra light annular diaphragm for the high range offers exceptional transient response with very high efficiency from 6 to 22 kHz. The unique voice coil technology employs a light weight Copper Clad Aluminium wire wound inside and outside of the Kapton™ former to improve the heat dissipation, dramatically increasing the acoustic output and reliability of the driver while minimises the power compression. The use of high grade neodymium magnets provide improved performance while significantly reducing transducer weight.
General |
|
| Product type | Coaxial compression driver |
| Brand | BMS |
| Reference | 4592ND |
| Product code | BMS-4592-8+8 |
Informations |
|
| Nominal impedance | 8+8 ohm |
| Dimensional category | 5 inch |
| Manufacturer sensitivity | 118 dB |
| Nominal power handling | 150 | 80 W |
| Max power handling | 300 | 160 W |
| Bandwidth | 300÷7000 | 6000÷22000 Hz |
| Recommended min cutoff frequency | 300 | 6300 Hz |
| Exit dimension | 2 inch |
Datas |
|
| Flux density | 1.95 | 2 T |
Dimensions |
|
| Voice coil diameter | 3.5 | 1.75 inch |
| Outside diameter | 132 mm |
| Depth | 113 mm |
| Driver dimensions mouting holes | 6.0 mm |
| Driver mounting system | 4 points on diameter 101.6 mm |
Shape & Materials |
|
| Magnet type | Neodymium |
| Winding material | CCAW (Copper-clad aluminium wire) |
| Diaphragm former material | Kapton |
| Diaphragm material | Polyester |
1 question replied about BMS 4592-8+8
-
Marc on 3/19/22
Hi, what would bei a matching woofer die the 4592nd coax 8+8? I sonst want to usw the 16+16 because of the Fall down at 900hz. I am thinking about the Dayton RSS390HF4 15". Any better suggestions? Th Response: The choice if the 15 inch mainly depends on the horn coupled with the 4592Nd. In the case of you can use the 4592Nd from 500 Hz, we advise you the new Kartesian Wom380_vTLHP which is a good 15 inch speaker able to produce low frequency and go in the middle range properly.
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
BMS 4592-8+8, Range, version, replacement...
From BMS
From others manufacturers
Repair BMS 4592-8+8
With BMS 4592-8+8, customers has also bought
Informations BMS 4592-8+8
Neodymium Magnet Assembly
With two subsystems in one, each Driver covers a smaller Frequency Range for increased Power Handling, high Dynamic and extremely low Distortion
Excellent Phase Coherence
Perfect Time Alignment without Problems of Multi-Source Interference
Ultra light Weight
The patented design of the BMS 4592 is a result of extensive
dedicated research and development providing dramatic improvement
in dynamic response, clarity and transparency. The BMS annular midrange diaphragm
covers the frequency range between 300 and 7000 Hz with a smooth, linear response.
The large diaphragm excursion of max. + / - 0,8 mm results in high output and increased power handling up to 1300 W peak.
The ultra light annular diaphragm for the high range offers exceptional transient response with very high efficiency from 6 to 22 kHz. The unique voice coil technology employs a light weight Copper Clad Aluminium wire wound inside and outside of the Kapton™ former to improve the heat dissipation, dramatically increasing the acoustic output and reliability of the driver while minimises the power compression. The use of high grade neodymium magnets provide improved performance while significantly reducing transducer weight.
Name Coaxial compression driver BMS 4592ND, 8+8 ohm, 2 inch exit
SKU 4592-8+8
Price € 629.27 524.39 Out of stock
Buy Coaxial compression driver BMS 4592ND, 8+8 ohm, 2 inch exit
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes BMS 4592-8+8
SPL vs Distorsion measure
SPL vs Impedance measure
SPL vs Distorsion measure
Dimensions
Garantie
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.
