Speaker RCF LF15N401, 8 ohm, 15.47 inch

Brand 
RCF
Model 
LF15N401
SKU 
LF15N401-8
Manufacturer code 
11100013
Product type 
Cone driver
Sales packaging 
Sold by piece
Brand
RCF
Model
LF15N401
TLHP code
LF15N401-8
Manufacturer code
11100013
Product type 
Cone driver
Sales packaging 
Sold by Piece
Recommended retail price
€445.00
TLHP selling price
323.68IT/piece
excluding delivery service
Save
27%

Simulate shipping costs and VAT
In stock: 4 pieces

If you want to purchase more than the quantity in stock, have a look at the supply time below :

Indicative average supply lead time: 3 weeks
90 days to change your mind !
learn more
Qty

  • Incredibly linear frequency response characteristics, the highest power handling of any comparable 15-inch neodymium transducer,the lower power compression.

    Features :
    4-inch, fiberglass inside/outside copper voice coil
    1800W continuous program power handling
    97 dB Sensitivity
    35 Hz – 1.5 kHz Frequency range
    Dual-forced air ventilation and 15mm top plate for minimum power compression
    Dual spider design with silicon based dampening control
    Triple-roll surround and corrugated straight cone geometry

    The LF15N401 uses a fibre loaded cone assembly along with a high excursion triple roll,constant geometry surround.
    This combination provides remarkable strength and a peak to peak maximum excursion of 52mm.
    The unique Dual-forced air venting system guarantee a very efficient voice coil ventilation for minimum power compression and higher power handling.

    Applications :
    The LF15N401 is ideal for use in applications where incredible power handling,long excursion and light weight is required.
    Specially designed for touring, perfect for high quality professional bass reflex and bass-horn system.
    The transducer's low frequency extension and control also makes it ideal for use witin critical listening applications such as studio monitoring subwoofer system.

General

Product type Cone driver
Brand RCF
Reference LF15N401
Product code 11100013

Informations

Nominal impedance 8 ohm
Dimensional category 15.5 inch
Frequency coverage type Sub, Low, Midbass
Manufacturer sensitivity 97 dB
Calculated sensitivity 96.21 dB
Nominal power handling 900 W
Bandwidth 35÷1500 Hz

Fundamental parameters

Sd 900 cm²
Mms 158 gr
Le 2.5 mH
Re 5.1 ohm
BL 27.8 T.m

Small signal parameters

Fs 34 Hz
Qes 0.23
Qms 5.8
Qts 0.22
Vas 160 L

Datas

Xmax ±9 mm
Calculated Xmax ±10 mm
EBP 148 Hz
Zmin 6 ohm
Fs / Qts 155 Hz
Vas * Qts² 7.75 L
Efficiency 2.64 %
Calculated efficiency 2.63 %

Dimensions

Voice coil diameter 4 inch
Winding depth 25 mm
Gap height 15 mm
Outside diameter 393 mm
Baffle cutout diameter 351 mm
Front thickness 16 mm
Depth after front 144 mm
Diamètre aimant (mm) 140 mm

Shape & Materials

Front chape Cylindrical
Magnet type Neodymium
Basket masterial Aluminium
Winding material Copper
Voice coil former Glass fiber
Surround material Cloth


Question about RCF LF15N401-8

Ask a new question!

This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.


With RCF LF15N401-8, customers has also bought

Informations RCF LF15N401-8

Incredibly linear frequency response characteristics, the highest power handling of any comparable 15-inch neodymium transducer,the lower power compression.

Features :
4-inch, fiberglass inside/outside copper voice coil
1800W continuous program power handling
97 dB Sensitivity
35 Hz – 1.5 kHz Frequency range
Dual-forced air ventilation and 15mm top plate for minimum power compression
Dual spider design with silicon based dampening control
Triple-roll surround and corrugated straight cone geometry

The LF15N401 uses a fibre loaded cone assembly along with a high excursion triple roll,constant geometry surround.
This combination provides remarkable strength and a peak to peak maximum excursion of 52mm.
The unique Dual-forced air venting system guarantee a very efficient voice coil ventilation for minimum power compression and higher power handling.

Applications :
The LF15N401 is ideal for use in applications where incredible power handling,long excursion and light weight is required.
Specially designed for touring, perfect for high quality professional bass reflex and bass-horn system.
The transducer's low frequency extension and control also makes it ideal for use witin critical listening applications such as studio monitoring subwoofer system.
Manufacturer RCF
Name Speaker RCF LF15N401, 8 ohm, 15.47 inch
SKU LF15N401-8
Impedance 8 Ohm
Seller TLHP
Price 323.68 269.74
Availability In stock


All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.

Measures/Schemes RCF LF15N401-8

SPL measure *

Image spl measure cone driver RCF Speaker RCF LF15N401, 8 ohm, 15.47 inch

* Frequency response curve of the loudspeaker taken in a hemispherical


Impedance measure

Image impedance measure cone driver RCF Speaker RCF LF15N401, 8 ohm, 15.47 inch

Dimensions

Image Drawing & Mounting cone driver RCF Speaker RCF LF15N401, 8 ohm, 15.47 inch

Garantie

This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.

This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x