Passive speaker SEAS SL26R, 10.59 inch

Brand 
SEAS
SKU 
SL26R
Manufacturer code 
D1003
Product type 
Passive driver
Brand
SEAS
TLHP code
SL26R
Manufacturer code
D1003
Product type 
Passive driver

Unavailable

  • SL26R is a passive radiator intended for use as an alternative to the port in a bass reflex cabinet, together with an active woofer of similar size or smaller.

    In many applications the traditional bass reflex port may produce high speed air noise or even have poor effect due to a small port area or a large port length. In such cases, a passive radiator may bring about an improvement.

    The chart below will show you the mass which has to be added to the cone of the passive radiator in order to obtain the desired Helmholtz resonance frequency in a given cabinet volume.

    The SL26R is already matched to our D1001 - L26ROY and a 40 litre cabinet. but it's also equipped with an M4 screw to which you can easily attach more added mass for other appications.

    For optimum performance, the passive radiator should be mounted vertically (with horizontal cone axis) This is especially important when a significant additional mass is used.

General

Product type Passive driver
Brand SEAS
Product code D1003

Informations

Product manufacturer range 26 cm, Extreme, Passive

Datas

Weight ~1.5 kg


Question about SEAS SL26R

Ask a new question!

This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.


Informations SEAS SL26R

SL26R is a passive radiator intended for use as an alternative to the port in a bass reflex cabinet, together with an active woofer of similar size or smaller.

In many applications the traditional bass reflex port may produce high speed air noise or even have poor effect due to a small port area or a large port length. In such cases, a passive radiator may bring about an improvement.

The chart below will show you the mass which has to be added to the cone of the passive radiator in order to obtain the desired Helmholtz resonance frequency in a given cabinet volume.

The SL26R is already matched to our D1001 - L26ROY and a 40 litre cabinet. but it's also equipped with an M4 screw to which you can easily attach more added mass for other appications.

For optimum performance, the passive radiator should be mounted vertically (with horizontal cone axis) This is especially important when a significant additional mass is used.

All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x