Speaker Peerless FSL-0818R01-08, 8 ohm, 8.24 inch
|
Peerless |
FSL-0818R01-08 |
Cone driver |
|
|
Brand Peerless |
TLHP code FSL-0818R01-08 |
|
|
Product type Cone driver |
|
|
Unavailable
-
This 8 inch 8 ohm speaker features a FEA optimized ferrite magnet motor, a 1.8 inch high-temperature voice coil, vented yoke for motor colling, and a high strength stamped steel frame. Kevlar loaded non-pressed paper cone to help dampen and control cone resonance. The multi-roll surround and spider have been optimized to reduce distortion over the excursion range of this transducer.
General |
|
| Product type | Cone driver |
| Brand | Peerless |
Informations |
|
| Nominal impedance | 8 ohm |
| Dimensional category | 8.5 inch |
| Frequency coverage type | Midbass, Midrange, High midrange |
| Manufacturer sensitivity | 94.4 dB |
| Calculated sensitivity | 93.66 dB |
| Nominal power handling | 220 W |
| Bandwidth | 70÷4500 Hz |
Fundamental parameters |
|
| Mms | 20.3 gr |
| Le | 0.48 mH |
| Re | 5.56 ohm |
Small signal parameters |
|
| Fs | 73.93 Hz |
| Qes | 0.4 |
| Qms | 3.03 |
| Qts | 0.35 |
| Vas | 15.04 L |
Datas |
|
| Xmax | ±2.2 mm |
| EBP | 185 Hz |
| Fs / Qts | 211 Hz |
| Vas * Qts² | 1.85 L |
| Calculated efficiency | 1.46 % |
| Weight | ~2.7 kg |
Dimensions |
|
| Voice coil diameter | 1.8 inch |
| Outside diameter | 209.2 mm |
| Baffle cutout diameter | 176.62 mm |
| Front thickness | 8.05 mm |
| Depth after front | 87.4 mm |
Shape & Materials |
|
| Front chape | Cylindrical |
| Magnet type | Ferrite |
Question about Peerless FSL-0818R01-08
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Informations Peerless FSL-0818R01-08
This 8 inch 8 ohm speaker features a FEA optimized ferrite magnet motor, a 1.8 inch high-temperature voice coil, vented yoke for motor colling, and a high strength stamped steel frame. Kevlar loaded non-pressed paper cone to help dampen and control cone resonance. The multi-roll surround and spider have been optimized to reduce distortion over the excursion range of this transducer.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes Peerless FSL-0818R01-08
SPL vs Impedance measure
Dimensions
