Visaton |
W 300 - 8 OHM |
W 300-8 |
9069 |
Cone driver |
Sold by piece |
|
Brand Visaton |
Model W 300 - 8 OHM |
TLHP code W 300-8 |
Manufacturer code 9069 |
||
Product type Cone driver |
Sales packaging Sold by Piece |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 3 weeks
30 cm (12") woofer with air-dried cone and pressure vented pole piece. Can be fitted at front or rear. Excellent value for money coupled with very good power-handling capabilities. Particularly suitable as a replacement for HiFi speakers.
Recommended cabinets:
Volume/Principle BR-Channel fb fc/QTC
70 l/closed - - 56 Hz/0,8
100 l/closed - - 49 Hz/0,71
150 l/closed - - 43 Hz/0,62
70 l/bass reflex BR 25.50 (length 7 cm) 36 Hz -
100 l/bass reflex BR 25.50 (length 20 cm) 32 Hz -
150 l/bass reflex 2 x BR 15.34 (length 7 cm) 29 Hz -
General |
|
Product type | Cone driver |
Brand | Visaton |
Reference | W 300 - 8 OHM |
Product code | 9069 |
Informations |
|
Nominal impedance | 8 ohm |
Dimensional category | 12 inch |
Frequency coverage type | Sub, Low, Midbass |
Manufacturer sensitivity | 91 dB |
Calculated sensitivity | 92.46 dB |
Nominal power handling | 120 W |
Max power handling | 180 W |
Bandwidth | 32÷2500 Hz |
Fundamental parameters |
|
Sd | 490 cm² |
Mms | 43 gr |
Le | 1.8 mH |
Re | 6.6 ohm |
BL | 9.4 T.m |
Small signal parameters |
|
Fs | 32 Hz |
Qes | 0.54 |
Qms | 2.68 |
Qts | 0.45 |
Vas | 190 L |
Datas |
|
Flux density | 0.95 T |
Xmax | ±7.92 mm |
Calculated Xmax | ±7.9167 mm |
Xvar, Xmech, Xlim | ±14 mm |
EBP | 59 Hz |
Fs / Qts | 71 Hz |
Vas * Qts² | 38.48 L |
Calculated efficiency | 1.11 % |
Weight | ~2.8 kg |
Dimensions |
|
Voice coil diameter | 1.97 inch |
Winding depth | 18.5 mm |
Gap height | 8 mm |
Outside diameter | 305 mm |
Baffle cutout diameter | 280 mm |
Front thickness | 12 mm |
Depth after front | 120 mm |
Diamètre aimant (mm) | 120 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Ferrite |
Basket masterial | Acier |
Surround material | Foam |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.