Search page for coils with filtering by capacitance in µF and price. Select filters to bring out the coils corresponding to your search.
Monacor
€10.03 IT/piece |
Air core coil Monacor LSIP-33, 0.33mH, 0.2ohm, Ø48 x 19mm
Self à air Monacor LSIP-33, inductance 0.33 mH conducteur ø 1.2 mm, puissance 300 WRMS, Rdc 0.2 ?, dimensions ø 48 mm x 19 mm |
Mundorf
€11.69 IT/piece |
Mundorf H71 ferrite core coil, 6.8mH ±3%, 0.65ohm, 0.71mm OFC-copper wire, Ø35xH25mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H71-6,8
H71-6,8
|
Mundorf
€14.10 IT/piece |
Mundorf L140 air core coil, 0.27mH ±2%, 0.13ohm, 1.40mm OFC-copper wire, Ø58xH18mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L140-0,27
L140-0,27
|
Mundorf
€137.03 IT/piece |
Mundorf VN300 feron core coil, 1.5mH ±5%, 0.02ohm, 3.00mm OFC-copper wire, L96xH86xZ84mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance.
VN300-1,5
VN300-1,5
|
Mundorf
€73.66 IT/piece |
Mundorf BS180 feron core coil, 3.9mH ±3%, 0.14ohm, 1.8mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 106x36xH36mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment. |
Monacor
€19.59 IT/piece |
Transformer core coil Monacor LSI-39T, 3.9 mH, RDC 0.16 ohm, fil 1.2 mm, 60 x 50 x 42 mm (EI-57)
Self sur fer Monacor LSI-39T, inductance 3.9 mH, fil de cuivre ø 1.2 mm, Rdc 0.16 ?, courant de saturation 7.9 A, dimensions 60 x 50 x 42 mm (EI-57) puissance sous charge 8/4 ohm: 500 WRMS /250 WRMS |
Mundorf
€7.26 IT/piece |
Mundorf L100 air core coil, 0.18mH ±2%, 0.19ohm, 1.00mm OFC-copper wire, Ø30xH20mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L100-0,18
L100-0,18
|
Mundorf
€19.57 IT/piece |
Mundorf BL71 air core coil, 4.7mH ±2%, 2.19ohm, 0.71mm OFC-copper wire, Ø58xH18mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL71-4,70
BL71-4,70
|