B&C Speakers |
18DS100 |
18DS100-8 |
ALT18DS1008 |
Cone driver |
Sold by piece |
|
Brand B&C Speakers |
Model 18DS100 |
TLHP code 18DS100-8 |
Manufacturer code ALT18DS1008 |
||
Product type Cone driver |
Sales packaging Sold by Piece |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 4 weeks
3000 W continuous program power capacity
100 mm (4 in) copper voice coil
34 - 1000 Hz response
97.5 dB sensitivity
Double silicone spider with optimized compliance
Ventilated voice coil gap for reduced power compression
Aluminium demodulating ring for very low distortion
This next evolution subwoofer uses a new, longer, four layer aluminum voice coil. The result is less heat, more energy in the gap, higher sensitivity, higher power handling, lower distortion and better overall performance. The 18DS 100 features a 34mm long, 4 inch diameter (100mm) Copper Clad Aluminum Wire voice coil. With a 1500watt AES power rating, 97.5 dB sensitivity, and over 14.0mm of Xvar, this high energy subwoofer is a significant step forward from similar models in the B&C range.
General |
|
Product type | Cone driver |
Brand | B&C Speakers |
Reference | 18DS100 |
Product code | ALT18DS1008 |
Informations |
|
Nominal impedance | 8 ohm |
Dimensional category | 18 inch |
Frequency coverage type | Sub, Low |
Manufacturer sensitivity | 97.5 dB |
Calculated sensitivity | 94.92 dB |
Nominal power handling | 1500 W |
Bandwidth | 34÷1000 Hz |
Fundamental parameters |
|
Sd | 1210 cm² |
Mms | 278 gr |
Le | 4.4 mH |
Re | 4.5 ohm |
BL | 30 T.m |
Small signal parameters |
|
Fs | 34 Hz |
Qes | 0.3 |
Qms | 9.5 |
Qts | 0.29 |
Vas | 155 L |
Datas |
|
Xmax | ±14.5 mm |
Calculated Xmax | ±15.8333 mm |
EBP | 113 Hz |
Zmin | 6.1 ohm |
Fs / Qts | 117 Hz |
Vas * Qts² | 13.04 L |
Efficiency | 2.1 % |
Calculated efficiency | 1.95 % |
Demodulation ring | Yes |
Dimensions |
|
Voice coil diameter | 4 inch |
Winding depth | 37 mm |
Gap height | 16 mm |
Outside diameter | 460 mm |
Baffle cutout diameter | 422 mm |
Front thickness | 16 mm |
Depth after front | 223 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Neodymium |
Winding material | Aluminium |
Voice coil former | Glass fiber |
Surround material | Cloth |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
From B&C Speakers
From others manufacturers
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.