Mundorf
€13.58 IT/piece |
Mundorf BP71 ferrite pipe core coil, 2.7mH ±3%, 1.01ohm, 0.71mm OFC-copper wire, Ø40xH23mm, with backed varnish wire
Mundorf's P series is halfway between the L and H series, with a ferrite core (or aronit for larger models) to find a compromise between low internal resistance, small footprint and price. Ideal in car-audio or sound system. 99.99% OFC copper backed varnish wire, glass fiber reinforced plastic body, ferrite / aronit core.
BP71-2,7
BP71-2,7
|
Mundorf
€17.03 IT/piece |
Mundorf BH125 ferrite core coil, 1mH ±3%, 0.11ohm, 1.25mm OFC-copper wire, Ø35xH25mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH125-1,0
BH125-1,0
|
Mundorf
€132.75 IT/piece |
Mundorf VN300 feron core coil, 1.2mH ±5%, 0.02ohm, 3.00mm OFC-copper wire, L96xH86xZ84mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance.
VN300-1,2
VN300-1,2
|
Mundorf
€72.75 IT/piece |
Mundorf VT125 feron core coil, 3.9mH ±3%, 0.28ohm, 1.25mm OFC-copper wire, L84xH60xZ60mm, with vaccum impregnated wire
The Mundorf T-series uses a round 99.99% OFC solid copper conductor, wrapped around a glass-fiber reinforced plastic backing, which is placed on an iron-silicon alloy structure to enhance the magnetic field. The T series is particularly suitable for filtering woofers in a precise and powerful way.
VT125-3,9
VT125-3,9
|
Mundorf
€23.85 IT/piece |
Mundorf CFC14 air copper foil coil, 0.15mH ±2%, 0.09ohm, 28x0.07mm OFC-copper wire, Ø40xH34mm, with backed varnish wire
CFC14-0,15
CFC14-0,15
|
Mundorf
€7.70 IT/piece |
Mundorf L50 air core coil, 1.5mH ±2%, 1.98ohm, 0.50mm OFC-copper wire, Ø30xH20mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L50-1,50
L50-1,50
|
Mundorf
€38.34 IT/piece |
Mundorf VLCU18 paper air copper foil coil, 1.5mH ±2%, 0.65ohm, 11.5x0.07mm OFC-copper wire, Ø64xH18mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU18-1,5
VLCU18-1,5
|
Mundorf
€13.58 IT/piece |
Mundorf P100 ferrite pipe core coil, 1.2mH ±3%, 0.37ohm, 1.00mm OFC-copper wire, Ø40xH23mm
Mundorf's P series is halfway between the L and H series, with a ferrite core (or aronit for larger models) to find a compromise between low internal resistance, small footprint and price. Ideal in car-audio or sound system.
P100-1,2
P100-1,2
|