Mundorf
€37.58 IT/piece |
Mundorf VSCU15 feron core copper foil paper coil, 0.47mH ±3%, 0.07ohm, 1.40mm OFC-copper wire, L84xH31xZ31mm, with vaccum impregnated wire
VSCU15-0,47
VSCU15-0,47
|
Mundorf
€325.58 IT/piece |
Mundorf VT300 feron core coil, 8.2mH ±3%, 0.1ohm, 3.00mm OFC-copper wire, L150xH115xZ121mm, with vaccum impregnated wire
The Mundorf T-series uses a round 99.99% OFC solid copper conductor, wrapped around a glass-fiber reinforced plastic backing, which is placed on an iron-silicon alloy structure to enhance the magnetic field. The T series is particularly suitable for filtering woofers in a precise and powerful way.
VT300-8,2
VT300-8,2
|
Mundorf
€385.58 IT/piece |
Mundorf CFC10 air copper foil coil, 3.9mH ±2%, 0.28ohm, 70x0.07mm OFC-copper wire, Ø104xH77mm, with backed varnish wire
CFC10-3,90
CFC10-3,90
|
Mundorf
€115.58 IT/piece |
Mundorf VL300 air core coil, 0.68mH ±2%, 0.07ohm, 3.00mm OFC-copper wire, L105xH79xZ93mm, with vaccum impregnated wire
VL300-0,68
VL300-0,68
|
Mundorf
€28.20 IT/piece |
Mundorf VLCU15 paper air copper foil coil, 0.22mH ±2%, 0.13ohm, 22x0.07mm OFC-copper wire, Ø42xH30mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU15-0,22
VLCU15-0,22
|
Mundorf
€14.48 IT/piece |
Mundorf BP100 ferrite pipe core coil, 1mH ±3%, 0.32ohm, 1.00mm OFC-copper wire, Ø40xH23mm, with backed varnish wire
Mundorf's P series is halfway between the L and H series, with a ferrite core (or aronit for larger models) to find a compromise between low internal resistance, small footprint and price. Ideal in car-audio or sound system. 99.99% OFC copper backed varnish wire, glass fiber reinforced plastic body, ferrite / aronit core.
BP100-1,0
BP100-1,0
|
Mundorf
€31.85 IT/piece |
Mundorf H180 aronit core coil, 1.5mH ±3%, 0.09ohm, 1.80mm OFC-copper wire, Ø51xH51mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H180-1,5
H180-1,5
|
Mundorf
€531.30 IT/piece |
Mundorf VN390 feron core coil, 18mH ±5%, 0.05ohm, 3.90mm OFC-copper wire, L150xH131xZ121mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance. |