Coils

Mundorf VN140 feron core coil, 2.7mH ±5%, 0.12ohm, 1.40mm OFC-copper wire, L66xH61xZ63mm, with vaccum impregnated wire

The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance.

Mundorf BS100 feron core coil, 2.7mH ±3%, 0.3ohm, 1mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 66x22xH22mm

Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment.

Mundorf BS180 feron core coil, 27mH ±3%, 0.45ohm, 1.8mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 150x51xH51mm

Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment.

Mundorf BS100 feron core coil, 5.6mH ±3%, 0.46ohm, 1mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 84x27xH27mm

Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment.

Mundorf BS71 feron core coil, 10mH ±3%, 1.1ohm, 0.71mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 84x29xH29mm

Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment.

Air core coil Mundorf L200, 0.22mH ±2%, 0.07ohm, Ø28xL58mm

Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.

Mundorf BS125 feron core coil, 15mH ±3%, 0.57ohm, 1.25mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 106x36xH36mm

Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment.

Mundorf BS71 feron core coil, 6.8mH ±3%, 0.86ohm, 0.71mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 66x25xH25mm

Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment.