Mundorf
€15.29 IT/piece |
![]() |
Mundorf L100 air core coil, 1.2mH ±2%, 0.55ohm, 1.00mm OFC-copper wire, Ø58xH18mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L100-1,20
L100-1,20
|
Mundorf
€51.16 IT/piece |
![]() |
Mundorf BL71 air core coil, 22mH ±2%, 5.26ohm, 0.71mm OFC-copper wire, Ø70xH29mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality. |
Mundorf
€73.38 IT/piece |
![]() |
Air core coil Mundorf BL140, 12mH ±2%, 1.35ohm, 89x76xH61mm, with backed varnish
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality. |
Mundorf
€42.61 IT/piece |
![]() |
Mundorf LL60 litz wire air core coil, 0.68mH ±2%, 0.21ohm, 7x0.6mm wire OFC-copper 99.99% with backed varnish wire, Ø29xL70mm
MCoil Hepta Strand coils unite the tonal clarity, beauty and distortion-free performance of air core coils with the stereophonic spaciousness of tightly-wound coils, alongside the harmonious-warmth and splendid brightness of strand copper wire.
LL60-0,68
LL60-0,68
|
Mundorf
€11.69 IT/piece |
![]() |
Pipe core coil Mundorf H100, 2mH ±3%, 0.19ohm, Ø25xL35mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H100-2,0
H100-2,0
|
Mundorf
€10.17 IT/piece |
![]() |
Mundorf L71 air core coil, 1.8mH ±2%, 1.22ohm, 0.71mm OFC-copper wire, Ø40xH20mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L71-1,80
L71-1,80
|
Mundorf
€79.74 IT/piece |
![]() |
iCore feron coil Mundorf BS140, 27mH ±3%, 0.67ohm, 130x41xH41mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment. |
Mundorf
€27.30 IT/piece |
![]() |
Mundorf BH180 aronit core coil, 0.68mH ±3%, 0.06ohm, 1.80mm OFC-copper wire, Ø51xH51mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH180-0,68
BH180-0,68
|