Mundorf
€27.25 IT/piece |
![]() |
Mundorf CFC18 air copper foil coil, 1.2mH ±2%, 0.55ohm, 11.5x0.07mm OFC-copper wire, Ø57xH18mm, with backed varnish wire
La bobine série CFC est une self à air constituée d’un enroulement de feuille de cuivre OFC 99.99% séparé par une feuille d’isolation polypropylène de 0.02 mm. La partie centrale est percée pour la fixation.
CFC18-1,2
CFC18-1,2
|
Mundorf
€25.13 IT/piece |
![]() |
Mundorf H125 aronit core coil, 4.7mH ±3%, 0.27ohm, 1.25mm OFC-copper wire, Ø51xH51mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H125-4,7
H125-4,7
|
Mundorf
€22.12 IT/piece |
![]() |
Mundorf BL125 air core coil, 0.82mH ±2%, 0.29ohm, 1.25mm OFC-copper wire, Ø58xH18mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL125-0,82
BL125-0,82
|
Mundorf
€12.74 IT/piece |
![]() |
Mundorf L71 air core coil, 2.7mH ±2%, 1.53ohm, 0.71mm OFC-copper wire, Ø40xH20mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L71-2,70
L71-2,70
|
Mundorf
€32.36 IT/piece |
![]() |
Mundorf L140 air core coil, 1.5mH ±2%, 0.38ohm, 1.40mm OFC-copper wire, Ø70xH29mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L140-1,50
L140-1,50
|
Mundorf
€32.48 IT/piece |
![]() |
Mundorf BH180 aronit core coil, 1.2mH ±3%, 0.08ohm, 1.80mm OFC-copper wire, Ø51xH51mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH180-1,2
BH180-1,2
|
Mundorf
€13.59 IT/piece |
![]() |
Mundorf BL140 air core coil, 0.18mH ±2%, 0.11ohm, 1.40mm OFC-copper wire, Ø58xH18mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL140-0,18
BL140-0,18
|
Mundorf
€24.50 IT/piece |
![]() |
Pipe core coil Mundorf H140, 3mH ±3%, 0.19ohm, Ø51xL51mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H140-3,0
H140-3,0
|