Mundorf
€6.41 IT/piece |
Mundorf L71 air core coil, 0.47mH ±2%, 0.58ohm, 0.71mm OFC-copper wire, Ø30xH20mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L71-0,47
L71-0,47
|
Mundorf
€29.82 IT/piece |
Mundorf BL71 air core coil, 10mH ±2%, 3.38ohm, 0.71mm OFC-copper wire, Ø58xH28mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality. |
Mundorf
€18.57 IT/piece |
Mundorf LL60 litz wire air core coil, 0.1mH ±2%, 0.07ohm, 7x0.6mm wire OFC-copper 99.99% with backed varnish wire, Ø18xL58mm
MCoil Hepta Strand coils unite the tonal clarity, beauty and distortion-free performance of air core coils with the stereophonic spaciousness of tightly-wound coils, alongside the harmonious-warmth and splendid brightness of strand copper wire.
LL60-0,10
LL60-0,10
|
Mundorf
€62.94 IT/piece |
iCore feron coil Mundorf BS140, 12mH ±3%, 0.39ohm, 130x35xH35mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment. |
Mundorf
€15.05 IT/piece |
Mundorf H125 ferrite core coil, 1.2mH ±3%, 0.12ohm, 1.25mm OFC-copper wire, Ø35xH25mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H125-1,2
H125-1,2
|
Mundorf
€15.29 IT/piece |
Mundorf L140 air core coil, 0.33mH ±2%, 0.15ohm, 1.40mm OFC-copper wire, Ø58xH18mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L140-0,33
L140-0,33
|
Mundorf
€10.86 IT/piece |
Mundorf H100 ferrite core coil, 1mH ±3%, 0.13ohm, 1.00mm OFC-copper wire, Ø30xH25mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H100-1,0
H100-1,0
|
Mundorf
€12.74 IT/piece |
Mundorf BL125 air core coil, 0.22mH ±2%, 0.14ohm, 1.25mm OFC-copper wire, Ø40xH20mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL125-0,22
BL125-0,22
|