Mundorf
€13.53 IT/piece |
Mundorf aronit core coil, BA140 1.5 mH, with backed varnish
|
Mundorf
€37.74 IT/piece |
Mundorf H140 aronit core coil, 6.8mH ±3%, 0.33ohm, 1.40mm OFC-copper wire, Ø51xH51mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H140-6,8
H140-6,8
|
Mundorf
€38.34 IT/piece |
Mundorf LL45 litz wire air core coil, 1mH ±2%, 0.42ohm, 7x0.45mm OFC-copper wire, Ø58xH28mm, with backed varnish wire
MCoil Hepta Strand coils unite the tonal clarity, beauty and distortion-free performance of air core coils with the stereophonic spaciousness of tightly-wound coils, alongside the harmonious-warmth and splendid brightness of strand copper wire.
LL45-1,0
LL45-1,0
|
Mundorf
€14.10 IT/piece |
Mundorf L125 air core coil, 0.47mH ±2%, 0.22ohm, 1.25mm OFC-copper wire, Ø58xH18mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L125-0,47
L125-0,47
|
Mundorf
€22.20 IT/piece |
Mundorf BH140 ferrite core coil, 1.8mH ±3%, 0.12ohm, 1.40mm OFC-copper wire, Ø40xH37mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH140-1,8
BH140-1,8
|
Mundorf
€11.87 IT/piece |
Mundorf BL71 air core coil, 1.5mH ±2%, 1.11ohm, 0.71mm OFC-copper wire, Ø40xH20mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL71-1,50
BL71-1,50
|
Mundorf
€11.35 IT/piece |
Air core coil Mundorf BL71, 3mH ±2%, 1.63ohm, Ø20xL40mm, with backed varnish
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL71-3,00
BL71-3,00
|
Mundorf
€45.29 IT/piece |
Mundorf BS180 feron core coil, 1.8mH ±3%, 0.09ohm, 1.8mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 106x34xH34mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment. |